Search results

Hallo SkyDiver, Das sind 2x 10TB HDD von WD:, sowie 1 x NVME mit 1TB - hauptsächlich für die Betriebssysteme der VM's und die Container. Die SMART-werte: SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 28 Celsius Available...

Sorry, sehe erst jetzt, dass ich Deine Gegenfrage nicht beantwortet habe: Das ist tatsächlich ein cluster mit nur einem host. Soll aber (eher langfristig) durch weitere Knoten erweitert werden. Daher ceph. So ganz kann ich Deiner Argumentation nicht folgen: wieso sollte ich ein mount-problem...

Danke für die Tipps. Der server ist noch im Aufbau, und wird entsprechend erweitert. Kannst du mir helfen herauszufinden, was das Problem verursachtt?

Hallo Zusammen, einer meiner proxmox-server streckt hin und wieder die Flügel: [FAILED] Failed to mount /mnt/pve/CephFS steht mehrfach auf dem Monitor-Konsole. Eingaben sind nicht möglich. Über das Web-Interface ist er nicht mehr zu erreichen. Erst nach 3 Sekunden Power-knopf schaltet er aus...

root@s301:~# ceph osd pool ls Raid1 .mgr cephfs_data cephfs_metadata root@s301:~# vm-105-disk-0 was not part of the migration process. I added it later and had right from the start troubles mounting it.

root@s301:~# rbd info vm-105-disk-0 -p Raid1 rbd: error opening image vm-105-disk-0: (2) No such file or directory root@s301:~# rbd rm vm-105-disk-0 -p Raid1 Removing image: 100% complete...done. root@s301:~# rbd ls -l cephpool rbd: error opening pool 'cephpool': (2) No such file or directory...

root@s301:~# rbd ls -l Raid1 rbd: error opening vm-105-disk-0: (2) No such file or directory NAME SIZE PARENT FMT PROT LOCK vm-104-disk-0 32 GiB 2 vm-104-disk-1 2.4 TiB 2 excl vm-105-disk-1 1000 GiB 2 excl...

root@s301:/etc/pve# cat storage.cfg dir: local path /var/lib/vz content iso,backup,vztmpl lvmthin: local-lvm thinpool data vgname pve content images,rootdir rbd: Raid1 content images,rootdir krbd 0 pool Raid1 cephfs: CephFS...

Hi. I have mounted a cephfs-disk in proxmox 7.3 using sshfs. The cephfs-disk is physically installed on another proxmox-server in the same LAN, but not in the same cluster. I backed up some VM's and containers on this drive, in order to restore them again on the destination server for migration...

A friend of mine solved this: He realized that my target drive is CEPHfs, and that the max file size was limited to 1TB. the command fs set <fs name> max_file_size <size in bytes> increased the max file size of the target drive and the backup went fine afterwards. hope this helps somebody else.

I mounted a disk from a pve within my LAN, outside my cluster, using sshfs. On this disk, there are about 9TB of free disk space: Usage 10.09% (931.79 GB of 9.24 TB) I want to backup one of my VM's (about 2.5TB) onto this disk, but the process fails: Task viewer: VM/CT 110 - Backup...

I finally got it working: I upgraded to pve-kernel 5.19. The NIC showed up in the web-GUI under "Networking". After activating them (and setting autostart=yes), they seem to work fine. Thank you very much for your support, mr44er.

I just realized, that the LED of the onboard NIC that stops working while linux boots is blinking, while the PC is turned off. This means that WOL is activated for this NIC, right? How to turn off?

https://forum.proxmox.com/threads/7-2-update-aquantia-nic-not-working-anymore.109191/

I will try to install the drivers for the onboard NIC. And I will try debian.

There is also a "Mem. Ok" button... page 1-13. The test has not revealed any errors so far...

Just want to point out a few things: The error "NMI watchdog detectedhard LOCKUP on cpu1" has not appeared again. The only problem I have is that the 2 out of three network-interfaces aren't activated, once linux starts booting. The CPU I am using is a ES-version. I tried another one in...

I removed 3 out of four ram modules. Only the one in bank A1 remains. Restarted the test. It freezes after 2 seconds. I then removed this module and replaced it with the neighboring module. The screen remains black. I then swapped it with the next module: the test freezes after 2 seconds...

I booted, and instead of choosing Proxmox, I chose to test the memory. I didn'tcheck the exact time, but it must have been running for 14 hours or so. screen looks like this (doesn't seem to change): I did not pull the Sata-cables, but the Asus NIC is not installed. Though the state says...

2. I reset the mainboard 4. I checked - no changes to be made. 6. I turned off xHCI. Anyhow: the only thing connected via USB is an elderly keyboard. The Asus homepage does not offer any Linux-drivers for this mainboard :-( I downloaded the driver for the PCIe network card (ASUS XG-C100C...