Recent content by virtManager

Hi @hd-- and @Neobin - ok, I suppose this explains it all then... Thank you very much, mystery has been solved. I can see there's no need to not pass through everything in a group then, as those devices are unusable to the host, once anything in the IOMMU group has been passed through. Thanks a...

Thanks! I did apply, but I think it was better to run "ifreload -a" as that revealed the following: "warning: enp1s0f3: interface not recognized - please check interface configuration". I both tried another ethernet-cable and I also rebooted - same warning and still not working... hmm... I also...

Hi, I'm running Proxmox with pfSense virtualized and have been doing that for around 1,5 years now... Now I'm migrating to new hardware and began messing with the configuration. Out of the box Proxmox works just nice with a static IP AFAIR. What I usually do is quickly to install pfSense...

As mentioned, I'm using the incredibly bad solution with a cron-script that runs maybe every 5 minutes or something (cannot remember) and then it pings to see if the network works: BAD_SOLUTION - and automatically restarts the LXC, if no ping reply. If you mean a "proper/real" solution, I'm also...

I agree - extremely difficult to debug... But, I think it's an LXC-issue and not a proxmox-issue, found a few threads that sounds similar: https://www.reddit.com/r/Proxmox/comments/uf2bnr/lxc_container_keeps_losing_its_ip_address/...

Okay, thanks... hmm, I don't have more ideas. If more people experience this problem, please write which LXC container you use/see this problem with, maybe we'll see a pattern that could lead to a real/proper fix instead of using this "automatic restart"-work-around...

I'm glad that worked. It's nice that "pct reboot" for my LXC fileserver only takes a few seconds (maybe 5-8 secs and it's up again). My LXC fileserver container is this one: https://www.turnkeylinux.org/fileserver - now it doesn't even reboot for up to 3 weeks. But in the beginning it was much...

Hi @adystech. Unfortunately I don't think that modified /etc/network/interfaces-file completed fixed it, because I found out that the problem persisted. My only - last - "solution" was/is to have a cronjob that pings my server every 5 minutes. If it cannot ping, it reboots the LXC... Basically...

Hi, I'm facing a conundrum because Proxmox makes it easy to install and run a "Turnkey (LXC) fileserver" and I have a very small low-power proxmox-pc turned on 24/7 that I want to run 1-2 VMs on in addition to pfSense. The problem I'm facing is that after weeks, the "Turnkey (LXC) fileserver"...

No problem, to begin with I couldn't figure out how to make an "easy" representation or drawing - but now I think I have. And enp1s0f3 is "free" to use and configure in any way possible, as it's not meant to be used for anything else, except that I would like to be able to contact proxmox via a...

Right, at least that's how it works when there's a DHCP-server in the system. When there's no DHCP-server, I'm confused about what it means to have a gateway ip-address? Maybe it doesn't mean anything at all, without a DHCP-server? Right, vmbr0 is passed through to pfSense which knows that this...

Hi I've been running proxmox and pfsense virtualized for some months now and am relatively happy about it. The proxmox-server is headless so when I once in a while screw things up, I physically move it and lose all internet connectivity, then plugin HDMI and usb keyboard so I can see what is...

Or at least setup something with 2-factor auth (I plan to move in that direction too, in the future)...

Hi, I have installed a Turnkey-fileserver (LXC) to create SMB/CIFS and NFS-shares with low resources and fast disk I/O instead of having to create a VM (also because I've read it's a bad idea to install those things directly on the host). The problem is that after a few days, I usually cannot...

Hi, no, sorry I never completely figured this stuff out - except I think I did a workaround with letting the container be a privileged container - as I vaguely remember it. I'm not really using that machine anymore but will soon setup a new machine, so I you figure this stuff out, please share...