Recent content by renne

I was able to configure an IPv6 SDN subnet in PVE 8.3.2 via the WebUI. Zone IPAM pve automatic DHCP true Subnet Set "DHCP ranges" VMs get IPv4/IPv6 addresses via DHCPv4/v6. Routing is next ;-)

Same problem here. The Fritz!Box 7530AX delegates a /57-prefix out of a dynamic /56-prefix delegated by the ISP. How to forward the /57-delegation to a SDN-subnet including firewall rules and IPsets?

Same problem here with two Compex WLE900VX WiFi cards. All ttys are flooded with these error messages, no chance to log-in and use any console.

Thanx for your suggestion! :) This works on a plain Debian VM: auto lo iface lo inet loopback allow-hotplug enp6s18 iface enp6s18 inet static address 192.168.1.3/24 gateway 192.168.1.1 iface enp6s18 inet6 static address fd00:0:0:1::3/64 gateway fd00:0:0:1::1 iface enp6s18...

Hi, I have a similar setup like @Willi_H without VLANs (Deutsche Telekom VDSL internet socket with /56 dynamic IPv6 prefix). After my Fritz!Box died I had to setup an OpenWRT VM (like OPNsense in @Willi_Hs setup). The PCIe-NICs of the VDSL modem and the WiFi-NICs are passed through to OpenWRT...

root@pve:~# apt update && apt-get install pppoeconf Hit:1 http://security.debian.org bookworm-security InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian...

Hello, we want to setup Simple SDN zones with IPv6 but can't find any documentation about how to configure SLAAC or DHCPv6 for a Simple SDN zone in the WebUI. Goal: Netcup-VPS with two public static IPv4 addresses and two public static IPv6/64 prefixes -> Headscale VPN -> Proxmox VE node ->...

Only the Homeassistant OS image supports UPNP. Other Homeassistant installation types do not support UPNP!

In a situation where you want to give multiple customers access to proxmox via their own (sub-)domains, yes. If one wants PVE to provide certificates to e.g. virtual machines, no.

Why does Proxmox use port 8006 instead of the standard port 443? It makes things complicated in VPNs if users have to remind the additional port.

The problem was not Proxmox but Yunohost. I couldn't figure out what is going wrong in Yunohost, but a Homeassistant KVM/Proxmox image works fine.

Hello, I'm trying to get multicast working with Proxmox KVMs on a bridged network (vmbr0). Setup: - Proxmox 7.3-3 on bare metal with 1 Gbit/s NIC connected to AVM Fritz!box. - VM with yunohost + Homeassistant - tried VirtIO-NIC and eth1000-NIC - Firewall off for VM I tried the following...

Hi, we want to use Barrier KVM to control multiple VMs from one PC without having to fiddle around with hardware KVM switches. Installing the distribution Barrier packages on CLI systems makes no sense as the dependencies will install all the X11 stuff. QEMU has an integrated Barrier client...

I have the same situation with wildcard certificates. Aggregating the comments in this thread I suggest to implement wildcard certificates in PVE, make the certificate number limit user-configurable with a sensible default value and use file-sharing to provide the wildcard certs to other...

A first start would be a configuration option to let the PMG container access the PVE cert store.