Recent content by pixel24

Thanks for the ideas. I'm currently thinking about the best strategy to achieve my goal and will test a few things to understand the runtime of each process. Regardless of that, I have a dependency issue with my backup using the "Stop" mode. My VM "SRV01" hosts all data (music, movies, etc.) as...

Hi @all, I’m using PVE 8.3.3 in a private environment on a Supermicro server with HBA and ZFS as storage. What I’m still missing is a good backup strategy for my entire VMs. I already back up the working data inside the VMs. PVE backups provide me with a simple way to quickly restore VMs, for...

HI@all, Can someone explain the difference between VirtIO SCSI and VirtIO SCSI Single or give me a link to the documentation? with best pixel24

Yes, the board/CPU is a bit older: Intel(R) Xeon(R) CPU E5450 @ 3.00GHz On NUMA is activated or can I must look tonight. The VM has 2 sockets / 2 cores

Hi@all, I have a PVE installation here (7.4-17). After the motherboard broke I replaced it. Previously, an AM3 board with a 6-core CPU was installed. I have replaced this with a dual Xenon board with (a total of) 8 cores. The LSI 8 port RAID controller incl. storage (4 x 1TB SSD / RAID5) I took...

Hi@all, I have today on a PVE 7 the problem that the boot process hangs at fsck.xfs. Previously, the system was shut down normally. In the system is a LSI RAID controller with a RAID5 (4 x 1TB). The / of the PVE is 50GB large. The check should not take long. It has been hanging at this point...

OK thanks. I will search here. Now I know at least a few options to look for. I'm looking for a method in which I set up a restore VM which has an additional (empty) hard drive and restore the backup to it.

Hi@all, My PVE (6.4) backs up to a USB disk every night. Is there a way to mount this in another VM? with best pixel24

Hi@all, I run an ACME instance on another host in the LAN which takes care of the LE certificates of all hosts. If the certificates are renewed, it copies the current version to the corresponding host. For my PVE means I have three files: - vmhost01.example.en.crt - vmhost01.example.en.key -...

Worked. Thanks a lot!

Hi@all, i want to enable jumbo frames (MTU=9000) on a PVE guest (Univention UCS 5.0.3).the guest is "hanging" on vmbr0: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether a0:36:9f:4c:3b:ee brd ff:ff:ff:ff:ff:ff inet 192.168.xx.1/24...

ok, I found it here: https://forum.proxmox.com/threads/adding-new-disk-to-already-created-lvm-thin-volume.123108/#post-535648

Hi@all, I use LVM on my PVE. Now data is almost full and should be extended. Currently there is a PV (/dev/sda3) which is mounted in the VG 'pve'. /dev/sda itself is a hardware RAID5. Now data is almost full. I configure a new RAID5 volume (/dev/sdb). How should I proceed to extend 'pve' with...

Partition enlarged with GParted and then: lvresize -l +100%FREE pve/data

ich stehe vor der gleichen Frage. Ich nutze LVM-Thin und habe das physikalische Volume am RAID-Controller von 2TB auf 3TB vergrößert. Die VolumeGroupe hat natürlich noch die gleiche Größe: root@vmhost01:~# vgdisplay --- Volume group --- VG Name pve System ID...