Recent content by PeterZ

Hi @apc103, thanks for chiming in, it's almost impossible that I'm the only one with this problem and so far, except for some good help, this topic didn't seem to get enough attention. Your solution made me look at my storage and I see that the pool I'm referring to here is not showing in the...

Thank you for your ongoing help! I have read up on this masked service to get a better understanding. systemctl enable --now zfs-import.service Failed to enable unit: Unit file /lib/systemd/system/zfs-import.service is masked. systemctl unmask zfs-import.service systemctl enable --now...

Sorry, that is chinese to me.. What I discovered: systemctl status zfs-import.service ○ zfs-import.service Loaded: masked (Reason: Unit zfs-import.service is masked.) Active: inactive (dead) EDIT: Found this advice zpool set cachefile=/etc/zfs/zpool.cache <zfs pool name>...

Okay, that works!! :cool: Any idea why this happens because I have no clue... EDIT: rebooting my server makes the zpool disappear again

Guys, it happened again! I restored from backup, everything was OK but now, after installing updates on Proxmox & rebooting, that zpool is gone... The disk is listed and the following command: zpool import -d /dev/disk/by-id/ata-WDC_WD30EFRX..... returns: no pools available to import SMART...

Hi @Kingneutron, thanks for answering even if I don't like the answer... You are completely right about that. I got home and noticed that there were a lot of updates so I thought of running them when the system was less used. TBH: I'm not that familiar with ZFS and I remembered that command...

Hi I just updated my system from 8.1.11 to 8.2.2 and whereas since v5.4, I had 'no problems at all', now 1 of my zpools has an issue. At first the zpool disappeared and after recreating it, no data (only 393KB) is showing. I don't understand what is going on and since I have done this process...

Hi bbgeek17, that did the trick! Thank you VERY much for stepping in and solving this! Have a nice day!

Hi I find this also very strange but could this be caused by a hard reboot? Only 9% used on my system disk. root@pve:~# ls -l /var/log/pveproxy/ total 121 -rw------- 1 root root 0 Oct 27 00:00 access.log -rw-r----- 1 www-data www-data 141681 Oct 27 00:03 access.log.1 -rw-r----- 1...

Hi all A Nextcloud update failed and made other containers inaccessible as wel. Even the webUI was not responding anymore. After restarting the system, the webUI remains inaccessible but all containers started fine. Is it normal that access.log cannot be opened? I also restarted the pveproxy...

Hi Because of a problem with my system disk, I started from scratch with the OS. OS and vm's are on a SSD, configured as a rpool. So far, everything is working since I had backups from the vm's. I have a HDD (zpool) with data which previously was visible in the host and I passed it on to a...

After installing another system with some backups that I had to be able to restore functionality, I'm looking at this issue again. I'm booting with ubuntu live and see all disks. The system has 2 disks: - SSD (rpool) for OS & VM's - HDD for data I was able to import the HDD but the SSD takes...

Hi Dunuin, thank you for your help! Is that message that I quoted 100% because of a full disk? I remembered later that I had a script to offload these backups and after that they are deleted from the server. I was able to boot the server in command-line: is there something I can do from there?

Hi all My system is not booting anymore and I get this message: PANIC: zfs: attempting to increase fill beyond max; probable double add in segment Does that imply that a disc is full (which could be possible due to automatic backups) If so, how can get access to the system to delete some of...

Hi Moayad, thanks for stepping in! About SSH: it seems like I am connected, tried to issue a reboot but without success. I run a few services, all local (dokuwiki, grafana, home automation, pi-hole) but none of them are accessible. The PVE GUI (webUI) cannot be loaded either so I will offload...