Recent content by msd

  1. M

    vmbr0: port 1 entered blocking state

    Hello, Here is log file ;-)
  2. M

    vmbr0: port 1 entered blocking state

    Hello, this is lspci log root@xxx:~# lspci -nnk | grep Eth -C 2 Kernel driver in use: ahci Kernel modules: ahci 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) Subsystem...
  3. M

    vmbr0: port 1 entered blocking state

    Hello, I have 3 servers and all servers go to blocking state at once is it some proxmox global problem od what??? root@hz2:~# dmesg|grep block|grep vmbr [ 5.817978] vmbr0: port 1(enp35s0) entered blocking state [ 8.718539] vmbr0: port 1(enp35s0) entered blocking state [ 9.934613]...
  4. M

    ProxmoxVE 6/7 - Disconnect VM from network

    Hello Support, I noticed one weird situation with the ProxmoxVE virtualization. I have a VM with CentOS 8 + MariaDB 10.6 installed, with the same configuration as the VPS at the same provider (Hetzner). When I connect externally to the VPS, everything works extra, it does not break the...
  5. M

    Proxmox 7 - After installation / Network issue

    Hello, Thanks for the links, I know for that manual and I use that documentation in my upgrade process, but the network is down. Did you notice that my fresh new installation of ProxmoxVE 7 on the new server raise the same error with a network this is not a problem of upgrade from 6? In both...
  6. M

    Proxmox 7 - After installation / Network issue

    Hello, I installed ProxmoxVE 7.0.1 on Hetzner dedicated server and during the installation process network works fine (ping is passing), but on the first reboot server boot up Proxmox and ping stop, and all ports are closed. The same scenario is when I try to install ProxmoxVE 6.4 which is...
  7. M

    Upgrade Proxmox 5.2 to 5.3

    Hello, I was commented that line of code because of this threat, I was waiting for confirmation :) It is fine now, version is 5.3.11 and works fine. In my previous installation, when I use this repository Proxmox report some CPU errors or something like this, if I see those errors again I'll...
  8. M

    Upgrade Proxmox 5.2 to 5.3

    This is my output... root@one:~# cat /etc/apt/sources.list deb http://ftp.debian.org/debian stretch main contrib deb http://ftp.debian.org/debian stretch-updates main contrib #deb http://download.proxmox.com/debian/pve stretch pve-no-subscription # security updates deb...
  9. M

    Upgrade Proxmox 5.2 to 5.3

    Hello Dominik, Do we need to use Proxmox Repository: deb http://ftp.debian.org/debian stretch main contrib # security updates deb http://security.debian.org stretch/updates main contrib --- or --- deb http://ftp.debian.org/debian stretch main contrib # PVE pve-no-subscription repository...
  10. M

    Upgrade Proxmox 5.2 to 5.3

    Hello Proxmox, We are using Proxmox standard installation without subscription and we would like to upgrade our Proxmox installation to latest v5.3. With standard procedure apt-get update... we still use Proxmox 5.2. This is Proxmox installation which is in produstion mode, servers are working...
  11. M

    command 'apt-get update' failed: exit code 100

    Hello Proxmox, I was installed latest Proxmox VE on my server and update repositories to Proxmox Without Subscription. deb http://ftp.debian.org/debian stretch main contrib # PVE pve-no-subscription repository provided by proxmox.com, # NOT recommended for production use deb...
  12. M

    Forward port range

    Hello Proxmox, I have a scenario when I need to forward the range of ports from outside world to Proxmox virtual machine (for example from 5000 to 5050) and now I need to forward ports, one by one. Is it possible to forward a range of ports to Proxmox VM without forwarding one by one? One...