Recent content by Mattias Hedman

Since I cannot export just the HAProxy config form pfSense I gor screenshots. This is the backend config. Ive added more screenshots. This setup gets me a "Warning only https-mode" "Secure web not avaiable".

For days now I have been struggling to get Proxmox to sit behind HAProxy as my reverse-proxy, so far I have failed. Using dig I get the right IP, using openssl I see that it gets the right valid certificate. Still I can't use the internal url. I discovered that Proxmox has created a...

Years back I managed to make it happen installning the Nvidia drivers on the pve host under proxmox v6 or something. i recall that I read somewhere that this issue has been taken care of in v7 or 8. Today I installed v8.1 and what I can see nothing has changed. Is there a post/blog that...

That is one idea, if the new home was a small place, it is not. 10.19.0.0/24 is the server VLAN. The main thing I need to do is to get to the storage pool of the server, to move stuff away.

Hey all! So I have a Proxmoxserver that has been running for years now, at 10.1.1.10/24. Now it will get a new home, the issue here is that the new place has a new ip-series. 10.19.0.0/24. How do I hook up the Proxmox server and change its base IP? Display and keyboard - but where do I find the...

I do yes. Add I mentioned above the Craft YT showed me goes to do it.

I tired it and Proxmox just crashed when I tried to start the VM. I have swapped the RAID card from the default 410 something to a föasjed card from Art of Server. It has been working flawlessly.

The need for a better file sharing solution has arisen here at home. :) I checked out Techno Tims YT where he virtualizes FreeNAS and under hardware he adds a PCI device, the LSI disk device. Let me back up some... I am running Proxmox on a Dell PE R720, one ZFS Pool. If I were to add the LSI...

I created an VLAN network and added bridge 2 to like this: auto vmbr1 iface vmbr1 inet manual bridge-ports eno2 bridge-stp off bridge-fd 0 bridge-vlan-aware yes bridge-vids 2-4094 #VLAN 10 auto vmbr1.10 iface vmbr1.10 inet static address...

I have just installed Proxmox ontop of Debian 11, I had ZoL installed a zpool. I used "zpool import -f <poolname>" to add the old pool to Proxmox, all works but just one small tiny thing. Only VM Disks and CT Volumes are listed for it, but I am not able to create an VM or LXC to use this. I have...

So after a few tries and reading the wiki again, the trick was to choose "No configuration" when I was prompted to choose what kind of mail service to use. The guide says Local only that did not work.

The systemdisk has 210 Gb left out of 227 Gb in total.

First up, yes I have read and followed the guide: https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_11_Bullseye Secondly I have checked that my /etc/hosts is correct, tested with hostname --ip-address and got the same ip-number. I can dig my domain name to my internal DNS and do a...

I want my VMs to use a VLAN. I have tried a few days now with no luck. Here I will show you my latest test. This is the settings for a Debian VM. I have tried using vmbr0 and 1 no difference. It doesn't get a network connection or a DHCP package. I am sure that I have overlooked something...

So now I have deleted all the LXCs and restored them from backup and pointed them to another storage. So far it seems to be working out.