Recent content by luciferlu

  1. L

    cannot get WSL2 to work in Windows 11, that is virtualized inside of proxmox 8

    confirmed. 13900hk es does not work.
  2. L

    [SOLVED] Why can’t my vmbr1 VM connect to an IP other than the host?

    After changing my cx4221a to 82599ES everything goes well. Proxmox doesnot support cx4221a very well? Thanks everyone for helping me to solve this. Yes all is correct except the hardware.
  3. L

    [SOLVED] Why can’t my vmbr1 VM connect to an IP other than the host?

    Yes.
  4. L

    [SOLVED] Why can’t my vmbr1 VM connect to an IP other than the host?

  5. L

    [SOLVED] Why can’t my vmbr1 VM connect to an IP other than the host?

    YES, I have tried already. VM1 adds a virtio NIC from vmbr1. switch: 192.168.1.199 PVE: 192.168.1.198 VM1:192.168.1.100 PVE can ping switch and VM1. VM1 can only ping PVE.
  6. L

    [SOLVED] Why can’t my vmbr1 VM connect to an IP other than the host?

    eth0 and net1 ? I did not do anything about vlan. 192.168.1.x and 2.x are two authentic network for me.
  7. L

    [SOLVED] Why can’t my vmbr1 VM connect to an IP other than the host?

    sh-5.2# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.2.45 netmask 255.255.255.0 broadcast 192.168.2.255 inet6 fe80::48d:38ff:fe13:b719 prefixlen 64 scopeid 0x20<link> ether 06:8d:38:13:b7:19 txqueuelen 1000 (Ethernet) RX...
  8. L

    [SOLVED] Why can’t my vmbr1 VM connect to an IP other than the host?

    host root@pve001:~# ip route default via 192.168.2.1 dev vmbr0 172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 192.168.1.0/24 dev vmbr1 proto kernel scope link src 192.168.1.198 192.168.2.0/24 dev vmbr0 proto kernel scope link src 192.168.2.106 lcx [root@arch ~]# ip route...
  9. L

    [SOLVED] Why can’t my vmbr1 VM connect to an IP other than the host?

    yes both vmbr0 and vmbr1.
  10. L

    [SOLVED] Why can’t my vmbr1 VM connect to an IP other than the host?

    I added a 10G NIC to my system. This card is connected to a 10G switch. I bridged this card to vmbr1. The problem is, the host can ping the switch IP, but neither the virtual machine nor the container can. What settings do I need to set up so that my virtual machine can access my 10G switch...
  11. L

    Very High load average on my Proxmox server

    thanks cat: /proc/pressure/iocat: No such file or directory root@pve:~# cat /proc/pressure/io some avg10=1.89 avg60=1.57 avg300=1.38 total=187966635651 full avg10=1.77 avg60=1.45 avg300=1.29...
  12. L

    Very High load average on my Proxmox server

    Yes. But a week ago the value is 140 and now it is 1500. The cpu usage is always less than 10%.
  13. L

    Very High load average on my Proxmox server

    root@pve:~# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 39 bits physical, 48 bits virtual CPU(s): 16 On-line CPU(s) list: 0-15...
  14. L

    Very High load average on my Proxmox server

    Except the high load average there is nothing wrong with this machine. Which information should I provide to check this situation?
  15. L

    [SOLVED] Kernel 5.11 & NVIDIA Linux vgpu-kvm

    https://github.com/justin-himself/NVIDIA-VGPU-Driver-Archive
See more
Top Bottom
Back