Update
After some research I've discovered that vlan0 is special and doesn't mean untagged. so my new /etc/network/interface looks like this.
auto lo
iface lo inet loopback
iface en01 inet manual
auto vmbr0
iface vmbr0 inet static
address 192.168.100.20/24
gateway...
Hi
Help please
I'm getting myself really confused with networking Proxmox
I have a proxmox server with a single NIC en01 connected to a LAN that has two subnets on it.
The first subnet is 192.168.100.0/24 with a default gateway going 192.168.100.1.
The second subnet is 10.100.0.0/16 with a...
Many thanks @bbgeek17
Both VMs running Debian 11
Following your suggested Google I found this article (Adding simulated network latency to your Linux server) which looks like it will do nicely
:cool:
Hi
Ok, this might sound like a strange question, especially as my searching has found people trying to solve slow connections and in fact I am trying to create one.
Let me explain.
In the real world there is a server hosting an application and other servers talk to it over the internet. One...
I'm having the exact same issue.
Proxmox 6.4-6 running VMs Windows 2016 with Intel NICs
Need to run Intel NICs because Remote Access & Routing (VPN) doesn't work with the VirtIO NIC.
It seems the NIC stops under load. Copying the Windows ISO from a share on the VM to a local PC can cause the...
This morning I was running Proxmox 4.3 with two VMs (Windows Servers)
Both VMs were shutdown and then VM backups were completed.
The hypervisor was then reinstalled with Proxmox 6.1
Both VMs were then restored from the backups.
All settings "looked" good so I started the VMs, both boot into...
I was hoping to upgrade the physical servers in place.
I was thinking of the following
Stop all VMs on that hypervisor
Take a backup, before starting.
Do in place upgrade from 4.4-15 to 5.4
Reboot hypervisor
Pray the cluster is still working
Power up the VMs again.
Repeat the exercise each...
Hi
This post is in two parts.
Currently have a cluster of 4 physical servers running proxmox 4.4-15. I want to add a 5th server to the cluster but running 5.4. Before I do this do they play nicely together? Is this scenario supported and even possible?
Part two of the question.
I want to...
Hi
I have a PowerEdge server with a Perc controller and 4 x 1Tb disks in a RAID5, Plus a hot spare.
Proxmox 5.3-1 all up set and running.
However I now need to add an additional 1Tb disk to the RAID.
From the Perc side of things that's all done. The Raid5 volume now has the 5 disks and the...
Hi
I have a single physical server running Windows 2012 R2 as a Domain Controller and Exchange Server 2016.
I need to migrate it to a temporary proxmox 5.2 hypervisor and test as fully working.
Then I need to destroy the current physical server and install proxmox 5.2 on that bare metal.
Then...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.