Recent content by GraceAboundz

Whoops. Sorry for never getting back to you on this. My device is a SAS2308 card built into the motherboard.

I updated to PVE 8.2.2, which updates the kernel to version 6.8, removed my custom kernel parameters, and all is working correctly.

I have an update for anyone who comes across this thread in the future. Shortly after my last post, I came across this thread. It has exactly the solution I needed! Here is the important part: Personally, I used the "pci=realloc=off" kernel boot parameter and it's been solid. I also tested the...

Thanks for the suggestion, @fortechitsolutions. I tried adding the pcie=noaer boot parameter to no avail. I re-read this thread again and I think we are experiencing different issues. As @bjorn-helgaas pointed out, the OPs issue ended up being the ECAM/MCFG issue, whereas yours is something...

I believe I have the same issue as the OP, but with a Chelsio T420-CR SFP+ card. Am I correct that the patch mentioned at the bottom of this thread is the solution for kernel 6.5? If so, can anyone provide clarity on how to apply the patch? I attached a screenshot of my error below. I would...

Did anyone ever find a solution to this? Same thing is happening to me. PVE 6.3 TrueNAS 12.0 for iSCSI storage

Hello, I've been using TrueNAS (previously FreeNAS) to serve iSCSI storage for my PVE VMs to use. It seems that whenever I make a configuration change in TrueNAS to anything related to iSCSI (eg remove, add, or change size of an extent), even if it's a change that is not related to an extent...

ravmeister, were you able to get this resolved? I have had the exact same issue since upgrading to Proxmox 6. Was never a problem for me in PVE 5. Richard, what should we look for in the filter settings?