Recent content by Fred91

I managed to make OpenVPN work with routes by changing the default gateway in the server-bridge variable to our gateway IP (before, it was set to the IP of the server). However, I still can't use the internal OpenVPN DHCP as routing doesn't work. Fred

I checked hidden network card, but I'm afraid the Hyper-V card has been removed when I uninstalled the Hyper-V guest additions. For the e1000 card, I used the Intel drivers and Firewall is off. The problem was exclty the same when I used the Virtio network card (that's why I switched to e1000...

I can't get the MAC I used on Hyper-V as the machine has been deleted on Hyper-V. I managed to make it work using direct IP from our local network (ie, the client gets an IP 192.168.2.x instead of 192.168.50.x). But, I have defined routes to other networks which still doesn't work (they were...

Thank you for your reply. I created a new VM on Proxmox, with a new empty disk and a network card, then I used qemu-img convert to convert my vhd and replaced my empty disk. So, the network card doesn't have the same MAC, but the IP configuration of the network card has been configured...

Hello, I have an OpenServer (installed using openvpn.se version) installed on a Windows XP VM which was running fine with Hyper-V. OpenVPN is configured to assign an IP to the client (192.168.50.x) and a route is added to access our local network (192.168.2.x). User Authentication is done...

Hello, What is the minimum harddrive size to install Proxmox 1.6 ? No VM will be stored on this drive (stored on NFS share). It seems that the / partition is using 25% of the total hardrive size. I managed to install it on a 30 Gb hardrive (as a VM) and it seems to be ok but isn't a little...

Hello, I plan to install a proxmox cluster with one node for production and ont node for backup. I will use drbd. The fisrt server will use 15krpm SAS disks while the backup server will use standard SATA 7,2krpm. When the main server will write to the DRBD volume, will it have to wait that...

Thanks for your reply. That's what I thought at first time, but I'm not sure my controller can do that (SAS 6/i on Dell R300). By the way, I think I can upgrade to an controller wich an handle multiple virtual disks on the same raid array.

Hello, I plan to use Proxmox in a production environnement and I want to use the following configuration : - 1 main serveur which will be a big serveur on which will run most of our critical VM. - 1 backup server, a smaller machine, on which will run non critical VM and wich will be used...

Hello, I'm testing a proxmox cluster with 2 nodes using DRBD and a NFS share. It's working fine, I have some VM running on DRBS and others on NFS with no problem. Is there any way to move the hard disk of a VM from DRBD to NFS or NFS to DRBD ? My first thought was to stop the VM, remove the...