bbgeek17's latest activity
-
bbgeek17 replied to the thread Slow backups sabotaging VMs.I would think the steps are the same as troubleshooting any generic slow application whose job is to transfer data: - record/analyze CPU load on both side - record/analyze disk load - record/analyze network load, errors You may want to install... -
bbgeek17 reacted to pve-root's post in the thread Proxmox stuck after upgrade from 8.4.19 to 9.x with
Like.
Thank you, I could set a new pw -
bbgeek17 replied to the thread RHEL 7 VM MIGRATION FROM IBM POWER TO PVE 8.3.I don't think there is one for this conversion. I believe this is your only path. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Proxmox stuck after upgrade from 8.4.19 to 9.x.You can try this wiki to either change the password or debug the logs on you system: https://pve.proxmox.com/wiki/Root_Password_Reset Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Mutil-NIC Proxmox w/ TrueNAS iSCSI.Hi @NateNate , You have not shared your exact configuration of either the networking or the PVE storage subsystem. If my understanding of your description is correct, you are specifying an IP address in storage.cfg: - if you use the mgmt, the...
-
Thank you all. Coming from VMware and running mission critical workloads, we would definitely require some form of 24x7 support. If we end up going this route, I'll go with that suggestion and get customer references.
-
bbgeek17 replied to the thread PVE in Enterprise Environments.It is a bit of a catch-22 situation. PVE is elegantly straightforward to manage, and firms with strong Linux administration skills often find they do not require partner involvement. At the same time, forum members tend to be more technically...
-
bbgeek17 replied to the thread PVE in Enterprise Environments.Hi @esnmb , as an enterprise storage vendor we see all ranges of business customers moving to PVE. How they solve the support needs differs from self-supporting to partner engagement, to relying on Proxmox support. We have yet to hear about a...
-
bbgeek17 replied to the thread ESXi import fails at a reproducible offset with "qemu-img: error while reading ... Input/output error"."ddrescue" is great but OP's file is in ESXi on VMFS. "dd" is available in ESXi, "ddrescue" is not. "conv=noerror" option should be sufficient. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread lost disk in datacentre pane.Hey @warner_k , you can mark the thread as SOLVED by editing the first message and selecting the appropriate subject prefix. Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread [SOLVED] Backing up multiple clusters to same location.Hey @Red Squirrel , you can mark this thread as SOLVED by editing the first message and selecting the matching subject prefix. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread my device wont detect my hard drive.I believe OP is stuck in the GUI widget of VM creation or an "add ISO" widget. They are expecting to see their ISO storage and do not. I.e. this is not related to in-VM operations or hardware. Most likely OP did not mark their storage as ISO...
-
bbgeek17 replied to the thread my device wont detect my hard drive.At the very least you need to provide outputs of: cat /etc/pve/storage.cfg pvesm status I would also recommend reviewing: https://pve.proxmox.com/wiki/Storage:_Directory Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread ESXi import fails at a reproducible offset with "qemu-img: error while reading ... Input/output error".Great job tracing it down @pastrufazio . The corrupted region of the disk was likely not needed/used by the VM and hence was not affecting the functionality. Of course one day a disk Write could have hit it and then you would have had an issue...
-
bbgeek17 replied to the thread Seeking advice on best practices.Hi @TVKP , welcome to the forum. All your questions are valid to ask. The answers, as usual, depend on variables that are too many to list them all. 1 Storage: the choices between centralized SAN and Distributed storage will be influenced by...
-
bbgeek17 reacted to ralfbergs's post in the thread [SOLVED] Feature request: add column "VLAN" in overview of VMs/CTs with Like.
"Tags" is the way to go -- I'm using it, and it looks exactly as I want it (and is even more powerful beyond my limited needs... ).
-
bbgeek17 replied to the thread [SOLVED] Crowdstrike Falcon Sensor on PVE 9 Host?.Great! You can mark the thread as solved by editing the first message and selecting the appropriate subject prefix. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread [SOLVED] Feature request: add column "VLAN" in overview of VMs/CTs.Just keep in mind that there are installations with 100s if not thousands VLANs. There are already TAGs that can address your need in a way. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread [SOLVED] Crowdstrike Falcon Sensor on PVE 9 Host?.Think of PVE as an appliance, especially if you have not installed it on a vanilla Debian base. Can you install almost anything on Linux - yes. Have we seen Crowdstrike bring down quarter of the world IT - yes. Have they fixed _known_ bugs -...
-
bbgeek17 replied to the thread [SOLVED] 9.2.3 update - Setting up pve-manager (9.2.3) ....I am not aware of any way the pve-guests.service could be related to the apt-get lock in Debian. But if that worked for you - great! Cheers! Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox