Recent content by AxelTwin

  1. [SOLVED] Nvidia Tesla T4 with pci passthrough

    Hi, Nope. I had it mounted with pci passthrough but never managed to get it working with my 3D software. I even tried with nvidia vws licence but nothing worked
  2. ZFS issues with disk images after reboot

    same error here, vm still down after PVE reboot. If anyone has a tip I'll be gratefull !
  3. proxmox high IO for no reason

    I didn't think about firmware update, smart answer ! I'll check that first and change the disk if it doesn't resolve the issue.
  4. proxmox high IO for no reason

    Thanks for your reply Neobin, yes, there is sdc, sdd, sde and sdf in the raidz I checked SMART status an idrac, they both report everything is ok in atop, you never see 4 disk, it is always 3 alternatively with sdc being always on and busy (normal behaviour?). I have taken sdc offline from the...
  5. proxmox high IO for no reason

    Hi everybody, Since a few day proxmox server IO delay went to 30% average making all containers runnunig very slow. Disks are SSD enterprise grade on a brand new dell poweredge 740 There is only 2 container (1 zimbra 1 samba active directory) and 1 vm with 35 five total users there is 4 disks in...
  6. [SOLVED] Issue with GPU passthrough Failed to mmap 0000:9e:00.0 BAR 1

    found solution from this thread Comment from jart May7, 2022 did the trick
  7. [SOLVED] Issue with GPU passthrough Failed to mmap 0000:9e:00.0 BAR 1

    Hi there, I get the following message while starting VM with PCIe passthrough: vm: -device vfio-pci,host=0000:9e:00.0,id=hostpci0.0,bus=pci.0,addr=0x10.0,multifunction=on: Failed to mmap 0000:9e:00.0 BAR 1. Performance may be slow host log says: vfio-pci 0000:9e:00.0: BAR 1: can't reserve...
  8. [SOLVED] weird storage issue

    Found the solution by renaming rootfs: bkp-storage:subvol-102-disk-0,size=0T by real storage: rootfs: data:subvol-102-disk-0,size=0T
  9. [SOLVED] weird storage issue

    Hi there, I have a weird storage issue. some of my vm/pct have 2 disks, 1 unused and the other one is size=0 root@proxmox-3 ~ # cat /etc/pve/lxc/102.conf arch: amd64 cores: 4 features: nesting=1 hostname: memory: 6144 nameserver: net0...
  10. [SOLVED] Cluster join issue

    ok, found the solution. I connected the pbs server to the local node's storage and restored from there. Thanks !
  11. [SOLVED] Cluster join issue

    ok, thanks for the hint. I am trying to connect the third node which is a local one behind nat, to the cloud cluster. I need to get all the vms back from this cloud cluster to the local node and then shutdown the cloud cluster What would be the the easiest/fastest scenario ? Each of the cluster...
  12. [SOLVED] Cluster join issue

    ok, they have to be on the same network...
  13. [SOLVED] Cluster join issue

    Hi everybody, I tried to join a third node to my cluster today. The node is visible in the cluster but with a red cross. I can ssh login to the new node from the cluster GUI but it keeps asking for password. Can someone enlight me ? root@proxmox-1 ~ # pvecm status Cluster information...
  14. Failed to initialize NVML: Unknown Error - GPU passthrough

    Hi everybody, I configured a VM with GPU passthrough on proxmox 7 with tesla T4 card nvidia-smi stopped working and I can't figure out what went wrong here is the output I get: root@hyperviser:~# nvidia-smi Failed to initialize NVML: Unknown Error and some output from demsg...
  15. Problems with mdev instance creation

    for those who are interested:


The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!