Thanks for the respond.
I think it does related to the network problem. I'm afraid that it could be the adapter problem, which could be the worst case scenario.
So my team just tried to change the ip address and reboot for node 2, and so far it resolves the problem with the NetApp
However...
Hi Dominic.
Yes, "nfs-proxmox-netapp is the datastore from the NetApp storage (connection via NFS)
Now this is odd. I can ping the NetApp from proxmox02 as of now
But as yesterday and last week, after I reboot the node I can ping NetApp for about 30 minutes before they lost connection with...
Hi all,
Recently we have a problem for our host and datastore which seems weird.
In our cluster it consists of three host connected to datastores from HPE StoreEasy and NetApp (the storage network is the same)
But what confuses me that the first and third host have stable connection to the...
Hi all,
So I tried to install Proxmox VE 6.0.1 on an HP Blade server (HPE BladeSystem c7000 Enclosures ) through it's iLO and I almost managed to install it.
Unfortunately during installation, something happened that made the installation failed at 75% in assumption where it cannot install...
I've tried using Proxmox 4.4 Update 2 with container but still no avail. Need advice as how to overcome this problem
Here I attached several configurations that you might need as reference.
Hi Stoikov, sorry for the late respond,
1) The ping test for PVE node was successful
2) Here are the result for the checklist mentioned in your reply for the VM
3) this is the following checklist for the container
This is all I can fetch for now
Regards,
Ahmad Dhamiri
Here are the configurations I can obtain in the host, container & vm
Forgive me for I was not able to retrieve full configuration for both the container and the VM
Regards,
Ahmad Dhamiri
Hi to all Proxmox commitees,
I've just recently installed one Proxmox VE 6.0 host virtually in a POC server. The installation went fine with all the local storages & network running smoothly for the host but when I try provision one container and one vm inside the Proxmox host, the container...
Thank you for the answers Alwin, appreciate the feedback.
I think there is something happened during the deletion of the VM/Container, but I couldn't trace it.
I think I might skip this problem for now since it dosen't affect my playthrough, I hope.
Hi Alwin,
Sorry for the late reply. Just tried to run the command you suggested, I think it's almost success but then it issues this alert (refer to the image below):
Here are questions popped in my head right now:
1) Is watcher mentioned in the error message means the deleted container?
2)...
I'm afraid I've deleted the template. Tried to ls several times but to no avail.
Is the location in the figure below to the template is correct?
Regards,
Ahmad Dhamiri
Thanks for the response Alwin.
I just issue the command you've mentioned and it shows that the disk is still available.
Is there any command I need to issue to remove the disk?
Refer to the figure below.
Best regards,
Ahmad Dhamiri.
Greetings all.
This is my first time playing around Proxmox environment. Yesterday, I was trying to redo a Ceph pool storage and try to remove a container from the cluster that is connected to the Ceph pool storage. The container is a success, but then I encounter this problem where I cannot...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.