No more GUI after clusteriazion, cpg_dispatch failed but quorum OK

P

pdan

New Member
Sep 8, 2014
17
0
1
Italy
www.unicas.it
Hello forum,

I installed proxmox 3.2 on three servers and all OK: GUI, network etc. After clusterizing the three server as per https://pve.proxmox.com/wiki/Proxmox_VE_2.0_Cluster I lost GUI and seeking in /var/log/daemon.log while restarting cman, I obtain:

Code: 
Sep  8 13:53:31 c11 pmxcfs[2477]: [status] crit: cpg_dispatch failed: 2
Sep  8 13:53:31 c11 pmxcfs[2477]: [status] crit: cpg_leave failed: 2
Sep  8 13:53:31 c11 pmxcfs[2477]: [libqb] warning: epoll_ctl(del): Bad file descriptor (9)
Sep  8 13:53:31 c11 pmxcfs[2477]: [status] crit: cpg_dispatch failed: 2
Sep  8 13:53:31 c11 pmxcfs[2477]: [status] crit: cpg_leave failed: 2
Sep  8 13:53:31 c11 pmxcfs[2477]: [libqb] warning: epoll_ctl(del): Bad file descriptor (9)
Sep  8 13:53:31 c11 pmxcfs[2477]: [confdb] crit: confdb_dispatch failed: 2
Sep  8 13:53:31 c11 pmxcfs[2477]: [libqb] warning: epoll_ctl(del): Bad file descriptor (9)
Sep  8 13:53:31 c11 pmxcfs[2477]: [quorum] crit: quorum_dispatch failed: 2
Sep  8 13:53:31 c11 pmxcfs[2477]: [libqb] warning: epoll_ctl(del): Bad file descriptor (9)
Sep  8 13:53:32 c11 pmxcfs[2477]: [quorum] crit: quorum_initialize failed: 6
Sep  8 13:53:32 c11 pmxcfs[2477]: [quorum] crit: can't initialize service
Sep  8 13:53:32 c11 pmxcfs[2477]: [confdb] crit: confdb_initialize failed: 6
Sep  8 13:53:32 c11 pmxcfs[2477]: [quorum] crit: can't initialize service
Sep  8 13:53:32 c11 pmxcfs[2477]: [dcdb] notice: start cluster connection
Sep  8 13:53:32 c11 pmxcfs[2477]: [dcdb] crit: cpg_initialize failed: 6
Sep  8 13:53:32 c11 pmxcfs[2477]: [quorum] crit: can't initialize service
Sep  8 13:53:32 c11 pmxcfs[2477]: [dcdb] notice: start cluster connection
Sep  8 13:53:32 c11 pmxcfs[2477]: [dcdb] crit: cpg_initialize failed: 6
Sep  8 13:53:32 c11 pmxcfs[2477]: [quorum] crit: can't initialize service

Network is OK and so it is quorum and nodes membership

Code: 
root@c10:~# pvecm status
Version: 6.2.0
Config Version: 3
Cluster Name: casilab
Cluster Id: 12844
Cluster Member: Yes
Cluster Generation: 80
Membership state: Cluster-Member
Nodes: 3
Expected votes: 3
Total votes: 3
Node votes: 1
Quorum: 2  
Active subsystems: 5
Flags: 
Ports Bound: 0  
Node name: c10
Node ID: 1
Multicast addresses: 239.192.50.94 
Node addresses: 10.10.0.85 

root@c10:~# pvevm nodes
-bash: pvevm: command not found
root@c10:~# pvecm nodes
Node  Sts   Inc   Joined               Name
   1   M     68   2014-09-08 13:10:22  c10
   2   M     80   2014-09-08 13:53:33  c11
   3   M     72   2014-09-08 13:10:23  c12

but cannot user pveversion because...

Code: 
root@c10:~# pveversion -v
-bash: pveversion: command not found
root@c10:~# pve-manager
-bash: pve-manager: command not found
root@c10:~# apt-get update
Hit http://ftp.it.debian.org wheezy Release.gpg
Hit http://ftp.it.debian.org wheezy Release    
Hit http://security.debian.org wheezy/updates Release.gpg            
Hit http://ftp.it.debian.org wheezy/main amd64 Packages
Hit http://security.debian.org wheezy/updates Release
Hit http://ftp.it.debian.org wheezy/contrib amd64 Packages           
Hit http://ftp.it.debian.org wheezy/contrib Translation-en
Hit http://security.debian.org wheezy/updates/main amd64 Packages
Hit http://ftp.it.debian.org wheezy/main Translation-en
Hit http://security.debian.org wheezy/updates/contrib amd64 Packages
Ign https://enterprise.proxmox.com wheezy Release.gpg
Hit http://security.debian.org wheezy/updates/contrib Translation-en
Hit http://security.debian.org wheezy/updates/main Translation-en
Ign https://enterprise.proxmox.com wheezy Release
Hit http://ceph.com wheezy Release.gpg
Hit http://ceph.com wheezy Release
Hit http://ceph.com wheezy/main amd64 Packages
Err https://enterprise.proxmox.com wheezy/pve-enterprise amd64 Packages
  The requested URL returned error: 401 Authorization Required
Ign https://enterprise.proxmox.com wheezy/pve-enterprise Translation-en_US
Ign https://enterprise.proxmox.com wheezy/pve-enterprise Translation-en
Ign http://ceph.com wheezy/main Translation-en_US
Ign http://ceph.com wheezy/main Translation-en
W: Failed to fetch https://enterprise.proxmox.com/debian/dists/wheezy/pve-enterprise/binary-amd64/Packages  The requested URL returned error: 401 Authorization Required

E: Some index files failed to download. They have been ignored, or old ones used instead.
root@c10:~# apt-get install pve-manager
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package pve-manager is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'pve-manager' has no installation candidate

any idea?

thank you in advance...

Pasquale
 
If you restart cman, you also need to restart depending service (pve-cluster, pvedaemon, pveproxy, pvestatd).
 
Last edited:
dietmar said:
If you restart cman, you also need to restart depending service (pve-cluster, pvedaemon, pveproxy, pvestatd).
Click to expand...

Hi Dietmar,

thank you for your repentine answer, result follows:

Code: 
root@c10:~# service pvestatd stop
root@c10:~# service pveproxy stop
root@c10:~# service pvedaemon stop
root@c10:~# service pve-cluster stop
Stopping pve cluster filesystem: pve-cluster.
root@c10:~# service cman stop
Stopping cluster:
   Stopping dlm_controld... [  OK  ]
   Stopping fenced... [  OK  ]
   Stopping cman... [  OK  ]
   Waiting for corosync to shutdown:[  OK  ]
   Unloading kernel modules... [  OK  ]
   Unmounting configfs... [  OK  ]
root@c10:~# service cman start
Starting cluster:
   Checking if cluster has been disabled at boot... [  OK  ]
   Checking Network Manager... [  OK  ]
   Global setup... [  OK  ]
   Loading kernel modules... [  OK  ]
   Mounting configfs... [  OK  ]
   Starting cman... /usr/share/cluster/cluster.rng:1002: element ref: Relax-NG parser error : Reference PVEVM has no matching definition
/usr/share/cluster/cluster.rng:1002: element ref: Relax-NG parser error : Internal found no define for ref PVEVM
Relax-NG schema /usr/share/cluster/cluster.rng failed to compile
[  OK  ]
   Waiting for quorum... [  OK  ]
   Starting fenced... [  OK  ]
   Starting dlm_controld... [  OK  ]
   Tuning DLM kernel config... [  OK  ]
   Unfencing self... [  OK  ]
root@c10:~# service pve-cluster start
Starting pve cluster filesystem : pve-cluster.
root@c10:~# service pvedaemon start
root@c10:~# service pveproxy start
root@c10:~# service pvestatd start
root@c10:~# pvecm status
Version: 6.2.0
Config Version: 3
Cluster Name: casilab
Cluster Id: 12844
Cluster Member: Yes
Cluster Generation: 96
Membership state: Cluster-Member
Nodes: 3
Expected votes: 3
Total votes: 3
Node votes: 1
Quorum: 2
Active subsystems: 5
Flags:
Ports Bound: 0
Node name: c10
Node ID: 1
Multicast addresses: 239.192.50.94
Node addresses: 10.10.0.85
root@c10:~# pvecm nodes
Node  Sts   Inc   Joined               Name
   1   M     92   2014-09-08 22:11:25  c10
   2   M     96   2014-09-08 22:11:25  c11
   3   M     96   2014-09-08 22:11:25  c12

root@c10:~# ps ax | grep httpd
   8884 pts/0    S+     0:00 grep httpd


Then trying to open GUI using firefox gives me: "Firefox non può stabilire una connessione con il server 10.10.0.85:8006" (Firefox can't estabilish a connection with server 10.10.0.85:8006) (c10 has 10.10.0.85 IP address)

Maybe I miss something crucial...

Pasquale
 
Hi Dietmar,

As I previously stated , no pveversion command is installed and if I try to install pve-manager package an error arise.
Infact:

Code: 
root@c10:~# pveversion -v
-bash: pveversion: command not found
root@c10:~# pve-manager
-bash: pve-manager: command not found
root@c10:~# apt-get update
Hit http://ftp.it.debian.org wheezy Release.gpg
Hit http://ftp.it.debian.org wheezy Release    
Hit http://security.debian.org wheezy/updates Release.gpg            
Hit http://ftp.it.debian.org wheezy/main amd64 Packages
Hit http://security.debian.org wheezy/updates Release
Hit http://ftp.it.debian.org wheezy/contrib amd64 Packages           
Hit http://ftp.it.debian.org wheezy/contrib Translation-en           
Hit http://security.debian.org wheezy/updates/main amd64 Packages
Hit http://ftp.it.debian.org wheezy/main Translation-en
Hit http://security.debian.org wheezy/updates/contrib amd64 Packages
Ign https://enterprise.proxmox.com wheezy Release.gpg
Hit http://security.debian.org wheezy/updates/contrib Translation-en
Hit http://security.debian.org wheezy/updates/main Translation-en
Ign https://enterprise.proxmox.com wheezy Release
Hit http://ceph.com wheezy Release.gpg
Hit http://ceph.com wheezy Release
Hit http://ceph.com wheezy/main amd64 Packages
Err https://enterprise.proxmox.com wheezy/pve-enterprise amd64 Packages
  The requested URL returned error: 401 Authorization Required
Ign https://enterprise.proxmox.com wheezy/pve-enterprise Translation-en_US
Ign https://enterprise.proxmox.com wheezy/pve-enterprise Translation-en
Ign http://ceph.com wheezy/main Translation-en_US
Ign http://ceph.com wheezy/main Translation-en
W: Failed to fetch https://enterprise.proxmox.com/debian/dists/wheezy/pve-enterprise/binary-amd64/Packages  The requested URL returned error: 401 Authorization Required

E: Some index files failed to download. They have been ignored, or old ones used instead.
root@c10:~# apt-get install pve-manager
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package pve-manager is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'pve-manager' has no installation candidate
root@c10:~#

Thank you for your reply
Pasquale
 
dietmar said:
read https://pve.proxmox.com/wiki/Package_repositories
Click to expand...

I modified /etc/apt/sources.list and /etc/apt/sources.list as suggested on wiki and some issues have been resolved. pve-manager has been successfully installed but pve-version is not. GUI isn't yet functional.

Code: 
root@c10:~# apt-get update
Get:1 http://download.proxmox.com wheezy Release.gpg [198 B]
Get:2 http://download.proxmox.com wheezy Release [3,083 B]                                            
Hit http://security.debian.org wheezy/updates Release.gpg                                            
Get:3 http://ftp.debian.org wheezy Release.gpg [1,655 B]                                                  
Hit http://security.debian.org wheezy/updates Release                                                     
Get:4 http://download.proxmox.com wheezy/pve-no-subscription amd64 Packages [73.6 kB]       
Get:5 http://ftp.debian.org wheezy Release [168 kB]                             
Hit http://security.debian.org wheezy/updates/main amd64 Packages                                         
Hit http://security.debian.org wheezy/updates/contrib amd64 Packages                                      
Hit http://security.debian.org wheezy/updates/contrib Translation-en                                      
Hit http://security.debian.org wheezy/updates/main Translation-en                                         
Hit http://ceph.com wheezy Release.gpg                                                              
Get:6 http://ftp.debian.org wheezy/main amd64 Packages [5,841 kB]       
Ign http://download.proxmox.com wheezy/pve-no-subscription Translation-en_US   
Ign http://download.proxmox.com wheezy/pve-no-subscription Translation-en      
Hit http://ceph.com wheezy Release                       
Hit http://ceph.com wheezy/main amd64 Packages           
Get:7 http://ftp.debian.org wheezy/contrib amd64 Packages [42.0 kB]                    
Get:8 http://ftp.debian.org wheezy/contrib Translation-en [34.8 kB]                    
Get:9 http://ftp.debian.org wheezy/main Translation-en [3,847 kB]                       
Ign http://ceph.com wheezy/main Translation-en_US                                      
Ign http://ceph.com wheezy/main Translation-en   
Fetched 10.0 MB in 5s (1,953 kB/s)
Reading package lists... Done
root@c10:~# apt-get upgrade
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages have been kept back:
  fence-agents-pve glusterfs-client glusterfs-common libpve-access-control
The following packages will be upgraded:
  base-files corosync-pve libcorosync4-pve libjpeg62 libjpeg8 libpve-common-perl libpve-storage-perl
  openssh-client openssh-server pve-cluster ssh tzdata vncterm vzctl
14 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
Need to get 3,567 kB of archives.
After this operation, 102 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://download.proxmox.com/debian/ wheezy/pve-no-subscription libpve-common-perl all 3.0-19 [44.6 kB]
Get:2 http://ftp.debian.org/debian/ wheezy/main base-files amd64 7.1wheezy6 [78.7 kB]
Get:3 http://download.proxmox.com/debian/ wheezy/pve-no-subscription libpve-storage-perl all 3.0-22 [53.9 kB]
Get:4 http://download.proxmox.com/debian/ wheezy/pve-no-subscription libcorosync4-pve amd64 1.4.7-1 [318 kB]
Get:5 http://ftp.debian.org/debian/ wheezy/main libjpeg62 amd64 6b1-3+deb7u1 [96.9 kB]
Get:6 http://ftp.debian.org/debian/ wheezy/main libjpeg8 amd64 8d-1+deb7u1 [138 kB]
Get:7 http://download.proxmox.com/debian/ wheezy/pve-no-subscription pve-cluster amd64 3.0-14 [146 kB]
Get:8 http://ftp.debian.org/debian/ wheezy/main tzdata all 2014e-0wheezy1 [458 kB]
Get:9 http://download.proxmox.com/debian/ wheezy/pve-no-subscription vncterm amd64 1.1-8 [206 kB]
Get:10 http://download.proxmox.com/debian/ wheezy/pve-no-subscription vzctl amd64 4.0-1pve6 [280 kB]
Get:11 http://download.proxmox.com/debian/ wheezy/pve-no-subscription corosync-pve amd64 1.4.7-1 [380 kB]
Get:12 http://ftp.debian.org/debian/ wheezy/main openssh-server amd64 1:6.0p1-4+deb7u2 [340 kB]
Get:13 http://ftp.debian.org/debian/ wheezy/main openssh-client amd64 1:6.0p1-4+deb7u2 [1,024 kB]
Get:14 http://ftp.debian.org/debian/ wheezy/main ssh all 1:6.0p1-4+deb7u2 [1,248 B]
Fetched 3,567 kB in 1s (2,440 kB/s)
Reading changelogs... Done
Preconfiguring packages ...
(Reading database ... 29719 files and directories currently installed.)
Preparing to replace base-files 7.1wheezy5 (using .../base-files_7.1wheezy6_amd64.deb) ...
Unpacking replacement base-files ...
Processing triggers for man-db ...
Processing triggers for install-info ...
Setting up base-files (7.1wheezy6) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 29719 files and directories currently installed.)
Preparing to replace libjpeg62:amd64 6b1-3 (using .../libjpeg62_6b1-3+deb7u1_amd64.deb) ...
Unpacking replacement libjpeg62:amd64 ...
Preparing to replace libjpeg8:amd64 8d-1 (using .../libjpeg8_8d-1+deb7u1_amd64.deb) ...
Unpacking replacement libjpeg8:amd64 ...
Preparing to replace tzdata 2014a-0wheezy1 (using .../tzdata_2014e-0wheezy1_all.deb) ...
Unpacking replacement tzdata ...
Setting up tzdata (2014e-0wheezy1) ...

Current default time zone: 'Europe/Rome'
Local time is now:      Tue Sep  9 09:12:46 CEST 2014.
Universal Time is now:  Tue Sep  9 07:12:46 UTC 2014.
Run 'dpkg-reconfigure tzdata' if you wish to change it.

(Reading database ... 29722 files and directories currently installed.)
Preparing to replace openssh-server 1:6.0p1-4+deb7u1 (using .../openssh-server_1%3a6.0p1-4+deb7u2_amd64.deb) ...
Unpacking replacement openssh-server ...
Preparing to replace openssh-client 1:6.0p1-4+deb7u1 (using .../openssh-client_1%3a6.0p1-4+deb7u2_amd64.deb) ...
Unpacking replacement openssh-client ...
Preparing to replace libpve-common-perl 3.0-18 (using .../libpve-common-perl_3.0-19_all.deb) ...
Unpacking replacement libpve-common-perl ...
Preparing to replace libpve-storage-perl 3.0-19 (using .../libpve-storage-perl_3.0-22_all.deb) ...
Unpacking replacement libpve-storage-perl ...
Preparing to replace libcorosync4-pve 1.4.5-1 (using .../libcorosync4-pve_1.4.7-1_amd64.deb) ...
Unpacking replacement libcorosync4-pve ...
Preparing to replace pve-cluster 3.0-12 (using .../pve-cluster_3.0-14_amd64.deb) ...
Unpacking replacement pve-cluster ...
Preparing to replace vncterm 1.1-6 (using .../vncterm_1.1-8_amd64.deb) ...
Unpacking replacement vncterm ...
Preparing to replace vzctl 4.0-1pve5 (using .../vzctl_4.0-1pve6_amd64.deb) ...
Unpacking replacement vzctl ...
Preparing to replace corosync-pve 1.4.5-1 (using .../corosync-pve_1.4.7-1_amd64.deb) ...
Unpacking replacement corosync-pve ...
Preparing to replace ssh 1:6.0p1-4+deb7u1 (using .../ssh_1%3a6.0p1-4+deb7u2_all.deb) ...
Unpacking replacement ssh ...
Processing triggers for man-db ...
Setting up libjpeg62:amd64 (6b1-3+deb7u1) ...
Setting up libjpeg8:amd64 (8d-1+deb7u1) ...
Setting up openssh-client (1:6.0p1-4+deb7u2) ...
Setting up openssh-server (1:6.0p1-4+deb7u2) ...
Restarting OpenBSD Secure Shell server: sshd.
Setting up libpve-common-perl (3.0-19) ...
Setting up libpve-storage-perl (3.0-22) ...
Setting up libcorosync4-pve (1.4.7-1) ...
Setting up pve-cluster (3.0-14) ...
Restarting pve cluster filesystem: pve-cluster.
Setting up vncterm (1.1-8) ...
Setting up vzctl (4.0-1pve6) ...
OpenVZ already running..failed
Setting up corosync-pve (1.4.7-1) ...
Setting up ssh (1:6.0p1-4+deb7u2) ...
root@c10:~# apt-get install pve-manager 
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
  ceph-common glusterfs-common ipset libgoogle-perftools4 libipset2 libiscsi4 libmnl0 libnetfilter-log1
  libpython2.7 libtcmalloc-minimal4 libunwind7 novnc-pve pve-firewall pve-qemu-kvm qemu-server spiceterm
Suggested packages:
  ceph ceph-mds
The following NEW packages will be installed:
  ceph-common ipset libgoogle-perftools4 libipset2 libiscsi4 libmnl0 libnetfilter-log1 libpython2.7
  libtcmalloc-minimal4 libunwind7 novnc-pve pve-firewall pve-manager pve-qemu-kvm qemu-server spiceterm
The following packages will be upgraded:
  glusterfs-common
1 upgraded, 16 newly installed, 0 to remove and 3 not upgraded.
Need to get 23.9 MB of archives.
After this operation, 44.0 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://download.proxmox.com/debian/ wheezy/pve-no-subscription glusterfs-common amd64 3.5.2-1 [4,907 kB]
Get:2 http://ftp.debian.org/debian/ wheezy/main libpython2.7 amd64 2.7.3-6+deb7u2 [1,207 kB]
Get:3 http://ftp.debian.org/debian/ wheezy/main libmnl0 amd64 1.0.3-3 [11.7 kB]   
Get:4 http://ftp.debian.org/debian/ wheezy/main libipset2 amd64 6.12.1-1 [48.0 kB]
Get:5 http://ftp.debian.org/debian/ wheezy/main libtcmalloc-minimal4 amd64 2.0-2 [177 kB]
Get:6 http://ftp.debian.org/debian/ wheezy/main libunwind7 amd64 0.99-0.3 [50.8 kB]      
Get:7 http://ftp.debian.org/debian/ wheezy/main libgoogle-perftools4 amd64 2.0-2 [454 kB]
Get:8 http://ftp.debian.org/debian/ wheezy/main libnetfilter-log1 amd64 1.0.0-1 [10.4 kB]
Get:9 http://ftp.debian.org/debian/ wheezy/main ipset amd64 6.12.1-1 [28.5 kB]          
Get:10 http://download.proxmox.com/debian/ wheezy/pve-no-subscription ceph-common amd64 0.80.5-1~bpo70+1 [7,005 kB]
Get:11 http://download.proxmox.com/debian/ wheezy/pve-no-subscription libiscsi4 amd64 1.12.0-2 [57.5 kB]
Get:12 http://download.proxmox.com/debian/ wheezy/pve-no-subscription novnc-pve amd64 0.4-6 [368 kB]
Get:13 http://download.proxmox.com/debian/ wheezy/pve-no-subscription pve-qemu-kvm amd64 2.1-5 [5,485 kB]
Get:14 http://download.proxmox.com/debian/ wheezy/pve-no-subscription pve-firewall amd64 1.0-7 [51.5 kB]  
Get:15 http://download.proxmox.com/debian/ wheezy/pve-no-subscription qemu-server amd64 3.1-34 [120 kB]   
Get:16 http://download.proxmox.com/debian/ wheezy/pve-no-subscription spiceterm amd64 1.0-2 [64.2 kB]     
Get:17 http://download.proxmox.com/debian/ wheezy/pve-no-subscription pve-manager amd64 3.2-30 [3,874 kB] 
Fetched 23.9 MB in 8s (2,812 kB/s)                                                                        
Reading changelogs... Done
Preconfiguring packages ...
Selecting previously unselected package libpython2.7.
(Reading database ... 29725 files and directories currently installed.)
Unpacking libpython2.7 (from .../libpython2.7_2.7.3-6+deb7u2_amd64.deb) ...
Preparing to replace glusterfs-common 3.4.2-1 (using .../glusterfs-common_3.5.2-1_amd64.deb) ...
Unpacking replacement glusterfs-common ...
Selecting previously unselected package libmnl0:amd64.
Unpacking libmnl0:amd64 (from .../libmnl0_1.0.3-3_amd64.deb) ...
Selecting previously unselected package libipset2:amd64.
Unpacking libipset2:amd64 (from .../libipset2_6.12.1-1_amd64.deb) ...
Selecting previously unselected package libtcmalloc-minimal4.
Unpacking libtcmalloc-minimal4 (from .../libtcmalloc-minimal4_2.0-2_amd64.deb) ...
Selecting previously unselected package libunwind7.
Unpacking libunwind7 (from .../libunwind7_0.99-0.3_amd64.deb) ...
Selecting previously unselected package libgoogle-perftools4.
Unpacking libgoogle-perftools4 (from .../libgoogle-perftools4_2.0-2_amd64.deb) ...
Selecting previously unselected package ceph-common.
Unpacking ceph-common (from .../ceph-common_0.80.5-1~bpo70+1_amd64.deb) ...
Selecting previously unselected package libiscsi4.
Unpacking libiscsi4 (from .../libiscsi4_1.12.0-2_amd64.deb) ...
Selecting previously unselected package libnetfilter-log1.
Unpacking libnetfilter-log1 (from .../libnetfilter-log1_1.0.0-1_amd64.deb) ...
Selecting previously unselected package novnc-pve.
Unpacking novnc-pve (from .../novnc-pve_0.4-6_amd64.deb) ...
Selecting previously unselected package pve-qemu-kvm.
Unpacking pve-qemu-kvm (from .../pve-qemu-kvm_2.1-5_amd64.deb) ...
Selecting previously unselected package ipset.
Unpacking ipset (from .../ipset_6.12.1-1_amd64.deb) ...
Selecting previously unselected package pve-firewall.
Unpacking pve-firewall (from .../pve-firewall_1.0-7_amd64.deb) ...
Selecting previously unselected package qemu-server.
Unpacking qemu-server (from .../qemu-server_3.1-34_amd64.deb) ...
Selecting previously unselected package spiceterm.
Unpacking spiceterm (from .../spiceterm_1.0-2_amd64.deb) ...
Selecting previously unselected package pve-manager.
Unpacking pve-manager (from .../pve-manager_3.2-30_amd64.deb) ...
Processing triggers for man-db ...
Setting up libpython2.7 (2.7.3-6+deb7u2) ...
Setting up glusterfs-common (3.5.2-1) ...
Installing new version of config file /etc/logrotate.d/glusterfs-common ...
Setting up libmnl0:amd64 (1.0.3-3) ...
Setting up libipset2:amd64 (6.12.1-1) ...
Setting up libtcmalloc-minimal4 (2.0-2) ...
Setting up libunwind7 (0.99-0.3) ...
Setting up libgoogle-perftools4 (2.0-2) ...
Setting up ceph-common (0.80.5-1~bpo70+1) ...
Setting up libiscsi4 (1.12.0-2) ...
Setting up libnetfilter-log1 (1.0.0-1) ...
Setting up novnc-pve (0.4-6) ...
Setting up pve-qemu-kvm (2.1-5) ...
Setting up ipset (6.12.1-1) ...
Setting up pve-firewall (1.0-7) ...
Starting PVE firewall logger: pvefw-logger.
Starting Proxmox VE firewall: pve-firewall.
Setting up qemu-server (3.1-34) ...
Setting up spiceterm (1.0-2) ...
Setting up pve-manager (3.2-30) ...
Restarting PVE Daemon: pvedaemonunabe to find handler for 'GET: /access/ticket' at /usr/share/perl5/PVE/RESTHandler.pm line 260.
Compilation failed in require at /usr/bin/pvedaemon line 16.
BEGIN failed--compilation aborted at /usr/bin/pvedaemon line 16.
 (warning).
Restarting PVE API Proxy Server: pveproxyunabe to find handler for 'GET: /access/ticket' at /usr/share/perl5/PVE/RESTHandler.pm line 260.
Compilation failed in require at /usr/bin/pveproxy line 24.
BEGIN failed--compilation aborted at /usr/bin/pveproxy line 24.
 (warning).
Restarting PVE SPICE Proxy Server: spiceproxy.
Restarting PVE Status Daemon: pvestatd.
root@c10:~# pve-version
-bash: pve-version: command not found
root@c10:~# 
root@c10:~# netstat -lnp | grep 8006
root@c10:~#

Pasquale
 
Please try to use the correct command:

# pveversion -v

Note: There is no command called 'pve-version'
 
[SOLVED] Re: No more GUI after clusterization, cpg_dispatch failed but quorum OK

you need to follow the upgrade guide exactly.

you run 'apt-get upgrade', but you need to run 'apt-get dist-upgrade'

see http://pve.proxmox.com/wiki/Download..._to_latest_3.2
Click to expand...

Gotcha! :D

My fail... the cluster and GUI are now fully functional !

Code: 
root@c10:~# pveversion -v
proxmox-ve-2.6.32: not correctly installed (running kernel: 2.6.32-29-pve)
pve-manager: 3.2-30 (running version: 3.2-30/1d095287)
pve-kernel-2.6.32-29-pve: 2.6.32-126
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-1
pve-cluster: 3.0-14
qemu-server: 3.1-34
pve-firmware: 1.1-3
libpve-common-perl: 3.0-19
libpve-access-control: 3.0-15
libpve-storage-perl: 3.0-22
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.1-5
ksm-control-daemon: 1.1-1
glusterfs-client: 3.5.2-1
root@c10:~# 
root@c10:~# netstat -lnp | grep 8006
tcp        0      0 0.0.0.0:8006            0.0.0.0:*               LISTEN      17397/pveproxy  
root@c10:~#

Thank you for your promptly support!

Pasquale
 
Last edited:
[SOLVED] Re: No more GUI after clusterization, cpg_dispatch failed but quorum OK

dietmar said:
Please try to use the correct command:

# pveversion -v

Note: There is no command called 'pve-version'
Click to expand...

Infact...
Code: 
root@c10:~# pveversion -v proxmox-ve-2.6.32: not correctly installed (running kernel: 2.6.32-29-pve) pve-manager: 3.2-30 (running version: 3.2-30/1d095287) pve-kernel-2.6.32-29-pve: 2.6.32-126 lvm2: 2.02.98-pve4 clvm: 2.02.98-pve4 corosync-pve: 1.4.7-1 openais-pve: 1.1.4-3 libqb0: 0.11.1-2 redhat-cluster-pve: 3.2.0-2 resource-agents-pve: 3.9.2-4 fence-agents-pve: 4.0.10-1 pve-cluster: 3.0-14 qemu-server: 3.1-34 pve-firmware: 1.1-3 libpve-common-perl: 3.0-19 libpve-access-control: 3.0-15 libpve-storage-perl: 3.0-22 pve-libspice-server1: 0.12.4-3 vncterm: 1.1-8 vzctl: 4.0-1pve6 vzprocps: 2.0.11-2 vzquota: 3.1-2 pve-qemu-kvm: 2.1-5 ksm-control-daemon: 1.1-1 glusterfs-client: 3.5.2-1 root@c10:~#

Thank you
Pasquale
 
Re: [SOLVED] Re: No more GUI after clusterization, cpg_dispatch failed but quorum OK

run

> apt-get install proxmox-ve-2.6.32
 
Re: [SOLVED] Re: No more GUI after clusterization, cpg_dispatch failed but quorum OK

tom said:
run

> apt-get install proxmox-ve-2.6.32
Click to expand...

ok !
Code: 
root@c10:~# pveversion -v
proxmox-ve-2.6.32: 3.2-136 (running kernel: 2.6.32-29-pve)
pve-manager: 3.2-30 (running version: 3.2-30/1d095287)
pve-kernel-2.6.32-32-pve: 2.6.32-136
pve-kernel-2.6.32-29-pve: 2.6.32-126
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-1
pve-cluster: 3.0-14
qemu-server: 3.1-34
pve-firmware: 1.1-3
libpve-common-perl: 3.0-19
libpve-access-control: 3.0-15
libpve-storage-perl: 3.0-22
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.1-5
ksm-control-daemon: 1.1-1
glusterfs-client: 3.5.2-1
Pasquale
 
Re: [SOLVED] Re: No more GUI after clusterization, cpg_dispatch failed but quorum OK

you need to reboot to activate kernel "pve-kernel-2.6.32-32-pve: 2.6.32-136"
 
Re: [SOLVED] Re: No more GUI after clusterization, cpg_dispatch failed but quorum OK

tom said:
you need to reboot to activate kernel "pve-kernel-2.6.32-32-pve: 2.6.32-136"
Click to expand...

Done.

Code: 
root@c10:~# pveversion -v
proxmox-ve-2.6.32: 3.2-136 (running kernel: 2.6.32-32-pve)
pve-manager: 3.2-30 (running version: 3.2-30/1d095287)
pve-kernel-2.6.32-32-pve: 2.6.32-136
pve-kernel-2.6.32-29-pve: 2.6.32-126
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-1
pve-cluster: 3.0-14
qemu-server: 3.1-34
pve-firmware: 1.1-3
libpve-common-perl: 3.0-19
libpve-access-control: 3.0-15
libpve-storage-perl: 3.0-22
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.1-5
ksm-control-daemon: 1.1-1
glusterfs-client: 3.5.2-1
root@c10:~# pvecm status
Version: 6.2.0
Config Version: 3
Cluster Name: casilab
Cluster Id: 12844
Cluster Member: Yes
Cluster Generation: 136
Membership state: Cluster-Member
Nodes: 3
Expected votes: 3
Total votes: 3
Node votes: 1
Quorum: 2  
Active subsystems: 5
Flags: 
Ports Bound: 0  
Node name: c10
Node ID: 1
Multicast addresses: 239.192.50.94 
Node addresses: 10.10.0.85 
root@c10:~# pvecm nodes
Node  Sts   Inc   Joined               Name
   1   M    116   2014-09-09 11:17:48  c10
   2   M    128   2014-09-09 11:22:59  c11
   3   M    136   2014-09-09 11:30:41  c12
root@c10:~#

Pasquale
 
You must log in or register to reply here.
Top Bottom