Configure PBS datastore to use zfs dataset created in PVE

whostolemyname

New Member
Mar 1, 2026
13
2
3
Hello everyone,
I have set up a Proxmox Virtual Environment on a NUC with the rootfs on a NVMe inside the NUC and 4 USB-attached HDDs. On the 4 HHDs I have created two zfs pools, each zfs pool resides on 2 mirrored HDDs.
On the PVE a couple of unprivileged containers are running, amongst them a Nextcloud instance with the user data in one of the two zfs-pools. The zfs dataset is mounted to the Nextcloud-LXC by a mountpoint, users are mapped and everything works fine.
I have also set up an LXC for hosting a Proxmox Backup Server (since I do not intend to make up for separate hardware). The Backup Server is running fine, but as soon as the bind-mounts are activated in the conf-file of the LXC, I cannot create a datastore from the mounted directories or access the datastore, when I create it before I mount the zfs dataset into the LXC. Since I figured, the reason could be the permissions on the directories, I converted the LXC into a privileged LXC, but this didn't do any difference.
I hope that the explanation of my setup is comprehensible. Which step did I miss, or is there a mistake in the entire approach (apart from recommendations concerning using other hardware) ?
Looking forward to any helpful hints.
 
Create a zfs Dataset <pbs-space> on your proxmox ve server and setup the user:group:
Code:
chown -R backup:backup <pbs-space>
 
This is practically what I have done. When attempting to create a datastore inside Proxmox backup server with bind-mounted zfs dataset, I get the following error:

qK44vL195W.png​
​
When I create the datastore in PBS, before I add the bind-mounts to the LXC-config, I can create the datastore, but as soon as I reboot the LXC with the Backup Server with the mountpoints added to the conf-file, I am getting the following error:

1MyZPB6Qto.png​
​
At the moment the LXC is a privileged container with permissions for the mountpoint as follows...
​
L7h0ftwDl7.png​
​
...and in the zfs dataset as follows:

AEIXmVnOUr.png​
 
do you use
Code:
zfs create <pool-name> <datastore-name>
?
Do you setup a "quota" zfs pool on your stores?
 
I have managed to get the setup to run. In case someone has the same situation and is running into similar problems, let me know and I'll explain my approach.
 
I have managed to get the setup to run. In case someone has the same situation and is running into similar problems, let me know and I'll explain my approach.
Why don't you just write it here so that everyone can enjoy? Please also mark the thread as solved by editing your first post.