I'm running into an installation error trying to install RHEL 10 on 8.4. I did see the warning about the need to x86-64-v3 support. I am using a 12th gen Intel i5 12500t. I assumed a fairly recent Intel CPU would fully support the v3 requirements. Is there anything in the BIOS configuration that could be limiting the v3 support in Proxmox?
Error attempting to install RHEL 10 on Proxmox 8.4 running on Intel i5 12500t PC
- Thread starter spkay31
- Start date
Hi Markus,
I didn't do anything except try to install the RHEL10 image. If this is pilot error I apologize, I am pretty green at proxmox - despite running 7.x for a couple years I don't have much experience with nuances of newer features, etc. Is this set on the VM prior to the installation in the VM properties?
Cheers,
-Scott
I didn't do anything except try to install the RHEL10 image. If this is pilot error I apologize, I am pretty green at proxmox - despite running 7.x for a couple years I don't have much experience with nuances of newer features, etc. Is this set on the VM prior to the installation in the VM properties?
Cheers,
-Scott
Thanks for the reply. That's all I needed - once I looked at the hardware settings I saw it had defaulted to x86-64-v2. Since I never installed a VM requiring the newer specs I didn't realize I might need to go the CPU specs in hardware and change to x86-64-v3. Appears to be booting fine now with Rocky 10 iso. Thanks for the assistance!
Cheers,
-Scott