Proxmox 3.0 Cluster Node Web Interface Problems

[osobh]

Hello All,

I looked over all the forum posts but couldn't get a firm answer to what it is that is causing the problem. I am running a 4 node cluster, and all nodes have no problems or errors when visiting the web-interface except for one. I've re-installed twice once with LVM and once with EXT4 and the same results happen. This error occurs with the latest chrome and firefox browsers. I have done testing with the SSL certs and it's still happening, could the be related to the disk? (500GB Seagate) Any assistance with this matter would be highly appreciated.

Node01:

pve-manager: 3.0-23 (pve-manager/3.0/957f0862)
running kernel: 2.6.32-20-pve
proxmox-ve-2.6.32: 3.0-100
pve-kernel-2.6.32-20-pve: 2.6.32-100
lvm2: 2.02.95-pve3
clvm: 2.02.95-pve3
corosync-pve: 1.4.5-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.0-1
pve-cluster: 3.0-4
qemu-server: 3.0-20
pve-firmware: 1.0-22
libpve-common-perl: 3.0-4
libpve-access-control: 3.0-4
libpve-storage-perl: 3.0-8
vncterm: 1.1-4
vzctl: 4.0-1pve3
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 1.4-13
ksm-control-daemon: 1.1-1

pveperf:


CPU BOGOMIPS: 11998.20
REGEX/SECOND: 895372
HD SIZE: 94.49 GB (/dev/mapper/pve-root)
BUFFERED READS: 102.69 MB/sec
AVERAGE SEEK TIME: 9.92 ms
FSYNCS/SECOND: 57.51
DNS EXT: 22.42 ms
DNS INT: 1.30 ms



Error:

Jul 10 08:15:10 pveproxy[6446]: problem with client 192.***.*.*; ssl3_read_bytes: tlsv1 alert unknown ca
Jul 10 08:15:10 pveproxy[6446]: WARNING: Can't call method "timeout_reset" on an undefined value at /usr/share/perl5/PVE/HTTPServer.pm line 155.
Jul 10 08:15:20 pveproxy[6446]: problem with client 192.***.*.*; ssl3_read_bytes: tlsv1 alert unknown ca

 

[dietmar]

Does it help if you re-generate the certifcates:

# pvecm updatecerts --force

Maybe you need to rebbot to make sure all services reads the new certificate.

 

[osobh]

Dietmar,

That has solved the problem thank you!! can we mark this thread as Solved?

 

[kinetica]

Hello I found the solution that fix the problem for me:

here the solution: http://forum.proxmox.com/threads/14502-Proxmox-3-0-Cluster-Node-Web-Interface-Problems

There was this message in the syslog:

May 12 16:23:19 proxmox2 pveproxy[3139]: problem with client 192.168.10.92; ssl3_read_bytes: tlsv1 alert unknown ca
May 12 16:23:19 proxmox2 pveproxy[3139]: WARNING: Can't call method "on_read" on an undefined value at /usr/share/perl5/PVE/HTTPServer.pm line 155.

I ran the following command:

pvecm updatecerts --force

and after a reboot Spice start to work Bye Sergio

 

[docent]

Hello,

After I have added third node to the cluster I have the same messages in syslog.

Mar 26 03:24:04 hq-vmc1-3 pveproxy[6332]: problem with client 10.1.0.11; ssl3_read_bytes: ssl handshake failure
Mar 26 03:24:04 hq-vmc1-3 pveproxy[6332]: Can't call method "timeout_reset" on an undefined value at /usr/share/perl5/PVE/HTTPServer.pm line 225.
Mar 26 03:24:05 hq-vmc1-3 pveproxy[6231]: problem with client 10.1.0.12; ssl3_read_bytes: ssl handshake failure
Mar 26 03:24:05 hq-vmc1-3 pveproxy[6231]: proxy detected vanished client connection
Mar 26 03:24:06 hq-vmc1-3 pveproxy[6219]: problem with client 10.1.0.12; ssl3_read_bytes: tlsv1 alert unknown ca
Mar 26 03:24:06 hq-vmc1-3 pveproxy[6219]: proxy detected vanished client connection

But pvecm updatecerts --force does not help me.

# pveversion --verbose
proxmox-ve-2.6.32: 3.4-150 (running kernel: 2.6.32-37-pve)
pve-manager: 3.4-3 (running version: 3.4-3/2fc72fee)
pve-kernel-2.6.32-37-pve: 2.6.32-150
lvm2: 2.02.98-pve4
clvm: 2.02.98-pve4
corosync-pve: 1.4.7-1
openais-pve: 1.1.4-3
libqb0: 0.11.1-2
redhat-cluster-pve: 3.2.0-2
resource-agents-pve: 3.9.2-4
fence-agents-pve: 4.0.10-2
pve-cluster: 3.0-16
qemu-server: 3.4-3
pve-firmware: 1.1-4
libpve-common-perl: 3.0-24
libpve-access-control: 3.0-16
libpve-storage-perl: 3.0-32
pve-libspice-server1: 0.12.4-3
vncterm: 1.1-8
vzctl: 4.0-1pve6
vzprocps: 2.0.11-2
vzquota: 3.1-2
pve-qemu-kvm: 2.2-8
ksm-control-daemon: 1.1-1
glusterfs-client: 3.5.2-1

 

[fcukinyahoo]

I have the same problem.

Nov 30 11:18:09 pmox03 pveproxy[16239]: problem with client 192.168.1.10; ssl3_read_bytes: tlsv1 alert unknown ca
Nov 30 11:18:09 pmox03 pveproxy[16239]: Can't call method "timeout_reset" on an undefined value at /usr/share/perl5/PVE/HTTPServer.pm line 315.
Nov 30 11:18:12 pmox03 pveproxy[16239]: problem with client 192.168.1.10; ssl3_read_bytes: ssl handshake failure
Nov 30 11:18:12 pmox03 pveproxy[16239]: Can't call method "timeout_reset" on an undefined value at /usr/share/perl5/PVE/HTTPServer.pm line 315.
Nov 30 11:18:16 pmox03 pveproxy[16239]: problem with client 192.168.1.10; ssl3_read_bytes: tlsv1 alert unknown ca
Nov 30 11:18:16 pmox03 pveproxy[16239]: Can't call method "timeout_reset" on an undefined value at /usr/share/perl5/PVE/HTTPServer.pm line 315.
Nov 30 11:18:24 pmox03 pveproxy[16239]: problem with client 192.168.1.10; ssl3_read_bytes: ssl handshake failure
Nov 30 11:39:09 pmox03 pveproxy[22547]: Can't call method "on_read" on an undefined value at /usr/share/perl5/PVE/HTTPServer.pm line 298.
Nov 30 11:43:05 pmox03 pveproxy[22547]: problem with client 192.168.1.10; ssl3_read_bytes: ssl handshake failure
Nov 30 11:43:05 pmox03 pveproxy[22547]: Can't call method "on_read" on an undefined value at /usr/share/perl5/PVE/HTTPServer.pm line 298.
Nov 30 11:43:07 pmox03 pveproxy[22547]: problem with client 192.168.1.10; ssl3_read_bytes: tlsv1 alert unknown ca
Nov 30 11:43:07 pmox03 pveproxy[22547]: Can't call method "on_read" on an undefined value at /usr/share/perl5/PVE/HTTPServer.pm line 298.

pvecm updatecerts --force didnt work for me either

any suggestions?

root@pmox03:~# pveversion --verbose
proxmox-ve: 4.3-72 (running kernel: 4.4.24-1-pve)
pve-manager: 4.3-12 (running version: 4.3-12/6894c9d9)
pve-kernel-4.4.24-1-pve: 4.4.24-72
pve-kernel-4.4.19-1-pve: 4.4.19-66
lvm2: 2.02.116-pve3
corosync-pve: 2.4.0-1
libqb0: 1.0-1
pve-cluster: 4.0-47
qemu-server: 4.0-96
pve-firmware: 1.1-10
libpve-common-perl: 4.0-83
libpve-access-control: 4.0-19
libpve-storage-perl: 4.0-68
pve-libspice-server1: 0.12.8-1
vncterm: 1.2-1
pve-docs: 4.3-17
pve-qemu-kvm: 2.7.0-8
pve-container: 1.0-85
pve-firewall: 2.0-31
pve-ha-manager: 1.0-38
ksm-control-daemon: 1.2-1
glusterfs-client: 3.5.2-2+deb8u2
lxc-pve: 2.0.6-1
lxcfs: 2.0.5-pve1
criu: 1.6.0-1
novnc-pve: 0.5-8
smartmontools: 6.5+svn4324-1~pve80
zfsutils: 0.6.5.8-pve13~bpo80

 

[MarcoP]

Does it help if you re-generate the certifcates:

# pvecm updatecerts --force

Maybe you need to rebbot to make sure all services reads the new certificate.

It did help me thanks.