Hello everyone,
I really need some help now, my server who contains 6 x 1.5 TB is setup with following raid setup on my Intel Raid controller.
disc 0 + 1 is in array 0
disc 2 + 3 is in array 1
disc 4 + 5 is in array 2
All my arrays is running with raid 1, when I made the setup i installed Proxmox on array 0 and then i extended the proxmox lvm to array 1 + 2.
2 weeks ago i had some problems with the raid controller, it said there was a HDD error, I saw that error was cause by a cable with bad connection on some of the sata cables.
My friend changed the sata cables for me, and tried to get the server up and running again, I don't know what he did but when I took over the server again the partition table was lost.
I have tried scan the hard drive and i it seems to contain all my data. when I run fdisk -l with live disc i says following:
This is array 0
Disk /dev/sda: 1500.0 GB, 1499999502336 bytes
255 heads, 63 sectors/track, 182364 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sda doesn't contain a valid partition table
/dev/sdb and /dev/sdc on array1 and array2 neither contains any partition tables.
Does any one know how I can get my setup up and running again?
I really need some help now, my server who contains 6 x 1.5 TB is setup with following raid setup on my Intel Raid controller.
disc 0 + 1 is in array 0
disc 2 + 3 is in array 1
disc 4 + 5 is in array 2
All my arrays is running with raid 1, when I made the setup i installed Proxmox on array 0 and then i extended the proxmox lvm to array 1 + 2.
2 weeks ago i had some problems with the raid controller, it said there was a HDD error, I saw that error was cause by a cable with bad connection on some of the sata cables.
My friend changed the sata cables for me, and tried to get the server up and running again, I don't know what he did but when I took over the server again the partition table was lost.
I have tried scan the hard drive and i it seems to contain all my data. when I run fdisk -l with live disc i says following:
This is array 0
Disk /dev/sda: 1500.0 GB, 1499999502336 bytes
255 heads, 63 sectors/track, 182364 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sda doesn't contain a valid partition table
/dev/sdb and /dev/sdc on array1 and array2 neither contains any partition tables.
Does any one know how I can get my setup up and running again?