Is this RC1 stable enough to be install in LIVE Production server ?
pve-cluster (1.0-22) wird eingerichtet ...
Starting pve cluster filesystem : pve-cluster[main] crit: Unable to get local IP address
[33m(warning).[39;49m
invoke-rc.d: initscript pve-cluster, action "start" failed.
dpkg: Fehler beim Bearbeiten von pve-cluster (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert 255 zurück
corosync-pve (1.4.1-1) wird eingerichtet ...
openais-pve (1.1.4-2) wird eingerichtet ...
libxml2-utils (2.7.8.dfsg-2+squeeze2) wird eingerichtet ...
libxslt1.1 (1.1.26-6) wird eingerichtet ...
xsltproc (1.1.26-6) wird eingerichtet ...
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von redhat-cluster-pve:
redhat-cluster-pve hängt ab von pve-cluster; aber:
Paket pve-cluster ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von redhat-cluster-pve (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von fence-agents-pve:
fence-agents-pve hängt ab von redhat-cluster-pve; aber:
Paket redhat-cluster-pve ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von fence-agents-pve (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
ifenslave-2.6 (1.1.0-17) wird eingerichtet ...
update-alternatives: /sbin/ifenslave-2.6 wird verwendet, um /sbin/ifenslave (ifenslave) im Auto-Modus bereitzustellen.
libapreq2 (2.12-2) wird eingerichtet ...
libapache2-mod-apreq2 (2.12-2) wird eingerichtet ...
libdevel-symdump-perl (2.08-3) wird eingerichtet ...
libapache2-mod-perl2 (2.0.4-7) wird eingerichtet ...
Enabling module perl.
Run '/etc/init.d/apache2 restart' to activate new configuration!
libapache2-reload-perl (0.10-2) wird eingerichtet ...
libapache2-request-perl (2.12-2) wird eingerichtet ...
libasound2 (1.0.23-2.1) wird eingerichtet ...
libauthen-pam-perl (0.16-2) wird eingerichtet ...
libcommon-sense-perl (3.3-1) wird eingerichtet ...
libconvert-asn1-perl (0.22-1) wird eingerichtet ...
libcrypt-openssl-bignum-perl (0.04-2) wird eingerichtet ...
libcrypt-openssl-random-perl (0.04-1+b1) wird eingerichtet ...
libcrypt-openssl-rsa-perl (0.25-1+b1) wird eingerichtet ...
libsysfs2 (2.1.0+repack-1) wird eingerichtet ...
tsconf (1.0-7) wird eingerichtet ...
libts-0.0-0 (1.0-7) wird eingerichtet ...
libdirectfb-1.2-9 (1.2.10.0-4) wird eingerichtet ...
libfile-readbackwards-perl (1.04-3) wird eingerichtet ...
libfile-sync-perl (0.09-4+b1) wird eingerichtet ...
libfilesys-df-perl (0.92-3+b1) wird eingerichtet ...
libfont-afm-perl (1.20-1) wird eingerichtet ...
libfont-freetype-perl (0.03-1) wird eingerichtet ...
libglib2.0-data (2.24.2-1) wird eingerichtet ...
libhtml-format-perl (2.04-2) wird eingerichtet ...
libintl-perl (1.20-1) wird eingerichtet ...
libnet-ssleay-perl (1.36-1) wird eingerichtet ...
libio-socket-ssl-perl (1.33-1+squeeze1) wird eingerichtet ...
libjpeg62 (6b1-1) wird eingerichtet ...
libjson-xs-perl (2.290-1) wird eingerichtet ...
liblog-agent-perl (0.307-2) wird eingerichtet ...
liblockfile-simple-perl (0.207-1) wird eingerichtet ...
liblzo2-2 (2.03-2) wird eingerichtet ...
libtimedate-perl (1.2000-1) wird eingerichtet ...
libmailtools-perl (2.06-1) wird eingerichtet ...
libnet-ip-perl (1.25-2) wird eingerichtet ...
libnet-dns-perl (0.66-2) wird eingerichtet ...
libnet-ldap-perl (1:0.4001-2) wird eingerichtet ...
libnet-libidn-perl (0.12.ds-1+b1) wird eingerichtet ...
libterm-readline-gnu-perl (1.20-1) wird eingerichtet ...
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von libpve-access-control:
libpve-access-control hängt ab von pve-cluster; aber:
Paket pve-cluster ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von libpve-access-control (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von clvm:
clvm hängt ab von redhat-cluster-pve; aber:
Paket redhat-cluster-pve ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von clvm (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von libpve-storage-perl:
libpve-storage-perl hängt ab von clvm; aber:
Paket clvm ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von libpve-storage-perl (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
libx86-1 (1.1+ds1-6) wird eingerichtet ...
libsvga1 (1:1.4.3-29) wird eingerichtet ...
libsdl1.2debian-alsa (1.2.14-6.1) wird eingerichtet ...
libsdl1.2debian (1.2.14-6.1) wird eingerichtet ...
libvncserver0 (0.9.7-2+b1) wird eingerichtet ...
libxfont1 (1:1.4.1-3) wird eingerichtet ...
lzop (1.02~rc1-2) wird eingerichtet ...
perl-suid (5.10.1-17squeeze3) wird eingerichtet ...
vncterm (1.0-2) wird eingerichtet ...
libaio1 (0.3.107-7) wird eingerichtet ...
pve-qemu-kvm (1.0-3) wird eingerichtet ...
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von qemu-server:
qemu-server hängt ab von libpve-storage-perl; aber:
Paket libpve-storage-perl ist noch nicht konfiguriert.
qemu-server hängt ab von pve-cluster; aber:
Paket pve-cluster ist noch nicht konfiguriert.
qemu-server hängt ab von redhat-cluster-pve; aber:
Paket redhat-cluster-pve ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von qemu-server (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
vlan (1.9-3) wird eingerichtet ...
iputils-arping (3:20100418-3) wird eingerichtet ...
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von resource-agents-pve:
resource-agents-pve hängt ab von redhat-cluster-pve; aber:
Paket redhat-cluster-pve ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von resource-agents-pve (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von pve-manager:
pve-manager hängt ab von qemu-server (>= 1.1-1); aber:
Paket qemu-server ist noch nicht konfiguriert.
pve-manager hängt ab von pve-cluster; aber:
Paket pve-cluster ist noch nicht konfiguriert.
pve-manager hängt ab von libpve-storage-perl; aber:
Paket libpve-storage-perl ist noch nicht konfiguriert.
pve-manager hängt ab von libpve-access-control; aber:
Paket libpve-access-control ist noch nicht konfiguriert.
pve-manager hängt ab von redhat-cluster-pve; aber:
Paket redhat-cluster-pve ist noch nicht konfiguriert.
pve-manager hängt ab von resource-agents-pve; aber:
Paket resource-agents-pve ist noch nicht konfiguriert.
pve-manager hängt ab von fence-agents-pve; aber:
Paket fence-agents-pve ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von pve-manager (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
vzquota (3.0.12-3) wird eingerichtet ...
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von vzctl:
vzctl hängt ab von pve-cluster; aber:
Paket pve-cluster ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von vzctl (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
dpkg: Abhängigkeitsprobleme verhindern Konfiguration von proxmox-ve-2.6.32:
proxmox-ve-2.6.32 hängt ab von pve-manager; aber:
Paket pve-manager ist noch nicht konfiguriert.
proxmox-ve-2.6.32 hängt ab von qemu-server; aber:
Paket qemu-server ist noch nicht konfiguriert.
proxmox-ve-2.6.32 hängt ab von vzctl (>= 3.0.29); aber:
Paket vzctl ist noch nicht konfiguriert.
dpkg: Fehler beim Bearbeiten von proxmox-ve-2.6.32 (--configure):
Abhängigkeitsprobleme - verbleibt unkonfiguriert
shared-mime-info (0.71-4) wird eingerichtet ...
ssl-cert (1.0.28) wird eingerichtet ...
ttf-dejavu-extra (2.31-1) wird eingerichtet ...
ttf-dejavu (2.31-1) wird eingerichtet ...
xfonts-encodings (1:1.0.3-1) wird eingerichtet ...
xfonts-utils (1:7.5+2) wird eingerichtet ...
x-ttcidfont-conf (32) wird eingerichtet ...
Updating font configuration of x-ttcidfont-conf...
Cleaning up category cmap..
Cleaning up category cid..
Cleaning up category truetype..
Updating category truetype..
Updating category cid..
Updating category cmap..
fancontrol (1:3.1.2-6) wird eingerichtet ...
libbsd-resource-perl (1.2904-1) wird eingerichtet ...
lm-sensors (1:3.1.2-6) wird eingerichtet ...
Trigger für python-central werden verarbeitet ...
Trigger für python-support werden verarbeitet ...
Fehler traten auf beim Bearbeiten von:
pve-cluster
redhat-cluster-pve
fence-agents-pve
libpve-access-control
clvm
libpve-storage-perl
qemu-server
resource-agents-pve
pve-manager
vzctl
proxmox-ve-2.6.32
Hi Guys,
today i have tried to install the Proxmox RC1 on Debian Squeeze (http://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Squeeze)
Please make sure that your hostname is resolvable via /etc/hosts, i.e you need an entry in /etc/hosts which assigns an IP address to that hostname.
127.0.0.1 localhost
127.0.1.1 prox
192.168.0.245 prox
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
I still have an entry in /etc/hosts !!!
I just realized that citadel gets installed on the host. I am not sure for what reason, as least it seems there are unneeded services running like pop3, imap etc...
Could somebody explain to me for what citadel is being used inside of Proxmox?
01.
Install Debian Squeeze (amd64). Version 6.0.3 with LVM based Partitioning
02.
- Set a fixed IP and make an entry in /etc/hosts
Caution: Debian sets an Value like "127.0.1.1".
This must be delete !!
Only two entries: 127.0.0.1 and your Host-IP
-Reboot
03.
- edit sources.list
- download the repository key
- aptitude update
- aptitude full-upgrade
04.
- Install the packages: ntp, ssh, postfix, ksm-control-daemon vzprocps
( I think LVM2 is not necessary, because it was installed by Debian and
upgraded by "aptitude full-upgrade")
- Install grub2
- Reboot
05.
- install pve-kernel-2.6.32-7-pve
- reboot
06.
- install pve-firmware
- reboot
07.
- install proxmox-ve-2.6.32
- a2ensite pve-redirect.conf
- reboot
I think that the official installation-manual contains an incorrect order.
...
In this way i could perform an error-free installation
user stuff looks quite nice - though i seem to have a little issue; trying to add a user based on PAM, i only and always get
create user failed: command '/usr/sbin/usermod -p '$5$eoeBVGSZ$mppiCb2wN3CCMZOsY8gYQcRSltGvoWOnEWAG07z1XM/' gnagna' failed: exit code 6 (500)
(which makes somehow sense since there is no user yet for 'usermod'...)
another small glitch - updating from last beta was only possible after doing a manual
update-rc portmap defaults
otherwise, dependency "nfs-common" broke, and all pve* packages subsequently...
(which makes somehow sense since there is no user yet for 'usermod'...)
You can only add existing pam users (we do not create them).
hello , what about supporting freeBSD? this current version freebsd is not working on it.
Since the upgrade to RC1 i've lost VNC connectivity
what pam service is pve using?