pve

Hello all, I have a network setup that includes multiple Proxmox servers and a virtualized pfSense firewall. I've configured a VPN via pfSense to access my local network remotely. While I can successfully connect to the VPN and access certain devices, I'm facing issues when trying to access my...

Hello guys, i have a problem. I need to connect my PBS to a PVE. To do this I need to create a Pool Storage/Disk. However, when trying to create it, it doesn't give me the option to select the disk. Both in directory mode and ZFS mode. * PBS was installed as ZFS(RAID10) on installation setup *...

Hello, I have a recent proxmox installation (7.4-16). Every so often, sometimes a week, sometimes a few days...I get a slug of SMART emails about hard disks failing, also ZFS error emails. They appear to all fail at the same time, which I don't buy. When this happens it always makes the ZPOOL...

Hello guys, i need to connect a PBS to a PVE, because i want to make the Backup. The servers are in different locations. What is the best way to do this? Through VPNs? Do I need to open ports on my router? I'm a beginner in networks and servers. I have a lot of doubts

Hi. There are 4 servers in the "Proxmox VE" cluster. Connected to three storage systems via ISCSI (there are multipaths). In the syslog of each server, these logs of this type are always displayed every second. This is very inconvenient, because because of them, you can skip all the other...

Hi there, I have a newbie question. We have two data centres, with four VM hosts, Data Center A and Data Center B. I have an installation Proxmox Backup Server in Data Centre B. I tried to backup a VM in Data Centre A to the PBS server in Data Centre B but it fails with an obvious error...

I updated Proxmox to version 7.0, re-examined the node, but it crashed, vswitch does not rise. I can’t bring the node to the internet.

Running PVE 8.0.4 ipmi_watchdog configured After disabling maintenance mode via ha-manager crm-command node-maintenance disable node3, ha-manager status shows: lrm node3 (old timestamp - dead?, [date & time]) ... service vm:XXXX (node3, freeze) systemctl status watchdog-mux pve-ha-lrm shows...

I would like to ask if there is any possibility for Ansible and Proxmox to work together in CICD stack?

Good morning/good afternoon/good evening everyone! I have a Windows Server 2016 Standard VM here in my PVE, but it is very slow to open, load files and programs. Processor and memory I believe is the bottleneck as I have a lot and when monitoring it reaches a maximum of 60% usage. Company users...

Hello, We currently hosting several Proxmox VE hosts in our datacenter all on Enterprise SSD's. What we want to achieve is to setup another bare-metal server with Proxmox PBS installation and an direct connect with an 1gbit cable between the Proxmox VE servers and the Proxmox Backup Server. I...

Hello, I´m really having trouble setting up a vLAN in/on PVE and make it available to the firewall and give access to WAN. Setup: pfSense Firewall with public IP and 2 physical interfaces (WAN and LAN) WAN provides Internet LAN Network 10.27.126.0/24 (Intern IP: 10.27.126.1) An PVE Instance...

Hallo, wir sind heute umgezogen, also hab ich mein Proxmox Host ordentlich heruntergefahren und am neuen Standort wieder hochgefahren. Alles hat erstaunlicherweise ohne Probleme funktioniert. Nur eine Linux Maschine (SLES11) meint auf einmal das es kein bootable Device mehr hat. Hab die VM...

Hello, I have a ceph pool "SSD_POOL" and I can't delete unused images inside it. Has anyone gone through something similar? I'm trying to remove, for example, the vm-103-disk-0 image

Good morning, I am looking to mount a network drive in an LXC container on my Promox. I've tried lots of solutions from different sites, but I get nowhere. Could you guide me to mount an anonymous network drive hosted on an internal NAS please? Here is part of the FSTAB file: ...

Hi, I have a test setup consisting of 2 x PVE nodes (dk1prx01 & dk1prx02), that are connected to the same single switch, with the same uplink to the rest of the network. If i copy data between VMs on the same node, i reach speeds of between 850-980Mbit/s - even if its routed between VLANs. If i...

Hello everyone, our cluster is using HA however, I noticed that at the moment when the shutdown or reboot command is sent through the terminal, the HA starts to actively turn on the machine Please tell me how to get around this or how to increase the ON timeout to turn on the machine

Hello Im getting errors on severals CT Its a programed snapshot INFO: starting first sync /proc/2144/root/ to /var/tmp/vzdumptmp1214516_1045 ERROR: Backup of VM 1045 failed - command 'rsync --stats -h -X -A --numeric-ids -aH --delete --no-whole-file --sparse --one-file-system --relative...

Hello, I have changed IP Addres room of my network (before: 192.168.178.0, now 192.168.173.0). My PVE (Single node) had the static IP 192.168.178.34. now of course I can't access the web interface. How can I change the IP manually via cmd (to 192.168.173.34)? Hopefully someone can help me.

Hi guys, I was wondering how you handle old Kernels and Boot Entries in your Proxmox Host(s). I usually keep one or two older Kernels, in Case I encounter Problems with the latest Kernel, similair to this Screenshot from another Forum-Post: Do you even keep older Kernels, or do you just...