I just updated the packages through the proxmox 6.x (I think 6.4 or 6.5) web interface and it caused the lxc containers to stop working properly... so I rebooted the proxmox node and now it won't come back up. Here is the screenshot of where the boot up process stops in emergency mode. I am not...
I migrated some CentOS openvz containers from Proxmox 3.4 to Proxmox 6 and they would not restore at all.
I even tried this PATCH on /usr/share/perl5/PVE/LXC/Setup/CentOS.pm but it still gives me the same error and I am unable to restore my CentOS 5.11 containers...
I keep getting this error...
I upgraded a server from proxmox v3 to v5 via reformatting. Then I added in the network interface file the same IP config from v3. I am able to access proxmox interface however the additional IP ranges that were on the host interface are no longer working for the containers.
I have read the...
I am confused. Back in proxmox 3 in order to add additional IPs from a different block to my containers, all I had to do was to add the following to the Proxmox network interface:
auto vmbr0:1
iface vmbr0:1 inet static
address 123.456.789.012
netmask 255.255.255.0
This doesn't...
I am trying to setup the best minimum scalable HA setup and Configuration. I read the documentation on High Availability, however I have some questions that are not well discussed in the documentation.
I was thinking of starting with 4 servers:
2 x front end server that will use a central...
The PVE 5.3 release notes says: "The distributed file system CephFS eliminates the need for external file storage such as NFS or Samba and thus helps reducing hardware cost and simplifies management."
1. I have never used this and as I am about to setup new pve servers I would like to get some...
we upgraded another server with Proxmox 1.9 (raid 10, sas drives, so IO is not an issue) and the backup ran yesterday and worked for most of the containers except for 3.
In /etc/vzdump.conf we have size: 2048.
In the vzdump logs we get.
Mar 18 06:53:09 INFO: Starting Backup of VM 600...
Hey guys,
I need some urgent help. I ran the command vzmigrate <node> <containerID> in order to migrate a container to a different note.
However because hit CTRL-C to cancel the process so I could do it from a different terminal.
I thought the process would gracefully cancel.. once...
Hi guys,
I am getting this error very 20mins on my system running proxmox 1.9
kernel:EDAC MC0: UE row 0, channel-a= 0 channel-b= 1 labels "-": NON-FATAL recoverable (Branch=0 DRAM-Bank=0 Buffer ID = 0 RDWR=Read RAS=0 CAS=0 NON-FATAL recoverable Err=0x10000800 (Non-Aliased Uncorrectable Patrol...
Since we upgraded from proxmox 1.2 to proxmox 1.9, the scheduled backup no longer works. We get the following error, any idea why and why we need to do to fix it?
command 'lvcreate --size 2048M --snapshot --name vzsnap-proxmox1-0 /dev/pve/data' failed with exit code 5
Hi,
I have a server running proxmox 1.9 and I am only interested in running OpenVZ.
Is it safe to disable the default bridge vmbr0:0 as follows?
auto vmbr0:0
iface vmbr0:0 inet static
Any reason why:
1. There is no Centos 6 openvz template available in proxmox 1.9 although they are available on the openvz website? Especially when even after renaming the downloaded template it still fails to upload to the proxmox interface?
2 and most of the proxmox template seem to be only...
I just upgraded a server from proxmox 1.2 (kernel 2.24) to proxmox 1.9 (kernel 2.6.32-7)
Everything seemed to go well. However some of our applications do not work properly.
Upon looking at the startup logs of the openvz containers I noticed the following issues.
Starting iSCSI daemon...
Can someone shed some light on how Proxmox utilizes the disk space at installation?
- I start with a 445GB RAID 10 storage,
- set pve root to use 45GB at installation
- swap ends up being total memory 24GB (does swap take actual physical extra space?)
And I end up with pve local storage of...
APEI: Can not request iomem region <00000000bf7b85ea-00000000bf7b85ec> for GARs.
I just installed proxmox 2.0rc1 on an Intel Xeon X5650 @ 2.67GHz with 24GB of RAM.
And set the maxroot to 45G
The main storage is on LSI Megaraid RAID10 with 8 drives - total 445GB.
The first boot message I get...
We still have a couple of servers running Proxmox 1.2.
1. How would you recommend we go about upgrading them to Proxmox 2.0 without breaking anything?
2. would we have to re-install or upgrade?
3. if we export all containers from Proxmox 1.2, would they import fine and work fine directly in...
I have a an enterprise Z-drive R4 600 GB super fast pci ssd storage at up to 2GB/s max read/write for sale since it doesn't have a driver for debian (only windows and centos) and i don't use KVM/windows.
So if you need a super fast storage, maybe you can get it off my hands.
Here are the...
Anyone knows how one can install the LSI MEGARAID SAS driver at boot on Proxmox 1.9?
What would be the equivalent of the "linux dd" command on proxmox for installing via drivers disquette?
I use ksar to graph performance history from the sar -A command. However when I tried today to use ksar to to graph the data from the proxmox server, it did not work.
Can you please advice why ksar is not able to graph the data exported from sar on proxmox while it works fine on centos?
I...
What is the linux equivalent of pveperf?
I assume that there is a number of packages and commands that can be run to get the data that pve perf get?
I am particularly interested in the syncs number.
Please advise.
Thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.