unfortunately, the vGPU driver lacks Cuda and other functionality necessary for LXCs to properly utilize the cards. so while its possible with tinkering to make the LXC see the card, there is nothing there to use.
so currently the only way is...
I'm trying to use my Quadro P6000 on 7.0.14-28-pve for AI.
I installed openwebui using community-script, but even though nvidia-smi shows the gpu in the LXC, ollama uses the cpu and the gpu shows no use.
vGPU works for me with GRID v19.6...
It was never 9090. Unless you use some 3rd party scripts/tools/modifications/proxy
https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_accessing_the_management_interface_post_installation
Blockbridge : Ultra low latency all-NVME shared...
It was never 9090. Unless you use some 3rd party scripts/tools/modifications/proxy
https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_accessing_the_management_interface_post_installation
Blockbridge : Ultra low latency all-NVME shared...
I'm in the progress of setting up a new home lab host for Proxmox, but I am hitting a couple of issues, that I think is related to a bug/regression in the NVMe kernel driver.
The setup in short:
Motherboard: Supermicro X14SBI-F
CPU: Xeon 6511P...
I was interested when I first learned of PDM. But, I'm not quite sure where it's intended to "live".
Reading through https://pdm.proxmox.com/docs I sort of get mixed messages whether this is intended to be a standalone app you might run on a...
Using the built-in backup scheduler to back up all containers to a node in the cluster which runs an NFS server. There was no backup process in the log for 27 October. I did get a brief ping monitoring outage for one node, which would have been...
He probably meant the following: in Windows, open Device Manager, locate the "Processors" category. You will find a few virtual processors listed. Uninstall (Delete) all of them, one by one. After each deletion, the system will ask whether you...
I created a RAIDZ test setup on an older server using 4x6TB SATA drives and launched a couple VMs on it. The performance was expectedly quite painful. Trying to interact with one VM wile restoring the second VM from backup was basically...
System details:
Proxmox VE 9.x, Boot Mode: EFI (Secure Boot)
Kernel at time of failure: 7.0.14-28-pve (installed in failing transaction)
Kernel prior: 7.0.14-26-pve
Hardware: MSI Pro Z790-P WiFi, Intel i9-12900K, 128GB RAM, RTX 5060 Ti...
I just tested this multiple times with my two Home Assistant VMs, ZFS replication and two hosts running 9.2.25. I went further by creating a snapshot on the first host, hot migrating the VM to the second, and then created a second snapshot...
Careful, there are two different problems mixed up here. The host freezing while you copy TBs around is what a 4-disk HDD RAIDZ1 does under heavy write load. Yeah, mirror or SSD is the fix. The app startup going from 3 s to 25 s is different...
You should provide your hardware details.
Side comment: running OS/DB/Applications on hard drives became obsolete 20 years ago. I'm confused that there is money for Windows Server 2025 and SQL, but still no SSDs.
Some general possibilities for...
@Stoiko Ivanov
nope.
pmg-smtp-filter[604941]: E169A6AEBB7B9ECBA9: message has ambiguous content
pmg-smtp-filter[604941]: fast exit because of errors (free 453570560 bytes)
Thats all in that case.
Alternatively, you could adjust the backup retention policy or size the storage appropriately so that it doesn't get to that point in the first place, and/or use monitoring tools that alert you when a certain threshold is reached. ;)
Oh, and by...
You are aware that you can limit the maximal amount for the ARC cache? The default in new Proxmox installs is 10% of system RAM at install time with maximum of 16 GB see following doc how to control and change the settings...
I’m testing the 7.0.14-28-pve kernel to see whether it resolves the e1000e/offloading issue. I installed it with:
apt install proxmox-kernel-7.0.14-28-pve-signed
I kept my working 6.5.13-6-pve kernel installed as a fallback. To boot...
I see there is a patch available, is there any movement on that? I have sync running pretty much all the time to keep up with the backups, so going into maintenance mode isn't really an option.