"Oh nooooo, has AI gotten into PVE codebase and done a numpty?" lol
Issue appeared after upgrading from 7.0.14-23-pve to 7.0.14-26-pve
Have never had this issue in all the upgrades prior. Something has broken in the underlying networking/bridge...
Not to speak for OP, but I believe he meant external ZIL. which only make sense in specific workloads.
Why does this argument keep popping up?
yes, enterprise drives TYPICALLY have more endurance then consumer drives.
No, "homelab" workloads...
Das Volume auf dem NAS ist meist ähnlich bzw. sogar noch schneller voll, da die nutzbare Kapazität geringfügig geringer ist (deshalb auch unterschiedliche Retentionseinstellungen). Warum auch immer...
Aber es ist kein ZFS, sondern BTRFS...
Outbound E-mails that have to be sent to the Internet via the PMG as relay must be sent to the internal port of the PMG (default: 26) - not to port 25. Port 25 is the external port for incoming emails from the Internet. Therefore, the port of the...
@Impact hat recht, da war ich zu vorsichtig. PBS setzt die atime bei der GC über utimensat, das klappt auch mit relatime/noatime. Die Chunkgröße kannst du in PBS selbst nicht einstellen, die ist fest (bis 4 MiB, bei VM-Images feste 4 MiB-Chunks)...
I'm the founder of Watchgoose (cron and heartbeat monitoring), so I have an interest here.
I wanted a vzdump hook script that reports start, success and failure to a ping-URL service, and found one thing that trips people up (it came up in this...
Man beachte das HowTO zum Proxmox BS.
Schau dir bitte mal deine Chunkgröße und den Deduplication Factor deines ZFS Datasets für den Proxmox BS an.
Die Chunkgröße kann bis 4 MByte groß werden. ZFS kann komprimieren, ist da aktiv auf deinem zfs pool?
Ach so das NAS - habe ich vergessen... :rolleyes:
Das fragliche Volume auf dem NAS besteht aus einem exklusiv für dieses Backup genutzten RAID1 (HDD) ohne SSD-Puffer und ist per NFS angebunden.
Guten Mogren,
bei mir setze ich immer noch, bei zfs und hdd Nutzung, auf ein vdev zfs special device mit ssd im zfs mirror mit n>1 SSD.
Mein Proxmox BS hat ein 4x HDD Setup, Raid 10, mit 2x 2 HDDs und ein vdev zfs special device im zfs mirror...
Hm, auf deinen Screenshots sehe ich vor allem zwei Sachen: Der Pool ist mit 206 GB frei von 16 TB praktisch voll (~99 %), dazu 78 % Fragmentierung. Ab ca. 80 % Füllstand wird ZFS spürbar langsamer, kurz vor voll bricht die Performance richtig...
Ja. Die 99% waren auch die Ursache der aktuellen Intervention...
Leider ist es manchmal problematisch den Speicherbedarf bei PBS "vorauszuahnen". Vor allem wenn das Backup plötzlich sehr viel größer ausfällt als im Normalbetrieb. Hierzu wäre...
Hm, auf deinen Screenshots sehe ich vor allem zwei Sachen: Der Pool ist mit 206 GB frei von 16 TB praktisch voll (~99 %), dazu 78 % Fragmentierung. Ab ca. 80 % Füllstand wird ZFS spürbar langsamer, kurz vor voll bricht die Performance richtig...
Ich habe nur eine Frage gestellt, die sich nun erübrigt hat, da du geantwortet hast. Ich entschuldige mich, dir evtl. auf die Füsse getreten zu sein. So bleibt also nur Willkommen.
Danke! Ich bin auf jeden Fall echt und relativ neu bei Proxmox. Als Privatanwender ist die Lernkurve zeitweise echt steil, und bei einigen Beiträgen weiter oben konnte ich den Frust körperlich spüren. Daher etwas contribution meienrseits...
Don't panic! ;-)
Etwas ungewöhnlich ist ein "first post" als Antwort auf einen ziemlich alten Post eigentlich schon, oder?
In den letzten ~12 Monaten gab es allerdings auffallend viele davon. Und vermutlich häufig von Bots bzw. per Script mit...
We are pleased to share two major milestones that will help us better serve our customers and partners worldwide.
Global 24/7 enterprise support
Starting October 19, 2026, Proxmox Enterprise Support will be available around the clock, 365 days a...
Hallo zusammen.
Wir haben im PBS-Server (eigene VM auf PVE) 2 durchgereichte HDD's mit 16TB im ZFS-Verbund als lokalen Backupspeicher eingerichtet. Ist keine Rakete (GC und Verify), funktioniert aber eigentlich ganz gut.
Außerdem haben wir...
Hi Udo,
there is an open feature request for this:
https://bugzilla.proxmox.com/show_bug.cgi?id=5865
Feel free to subscribe to that to keep getting updates on the progress.
Best regards
Jonas