I tested kernel-7.0.14-22_bnxt-test1, in my case, the problem is gone, there are no issues in the logs regarding the bnxt_en driver, and the network is working.
Die CEPH Keys haben nichts mit den VMs zu tun. Ein Update auf die neuste Proxmox Version aktualisiert nur die vorhandenen Pakete. Wenn Du auf v19 warst, bist Du immer noch auf v19. Update auf v20 muss manuell erfolgen, das sind folgende Schritte...
@TheHellSite, das würde ich hier nicht der PM983 anlasten. Bei Joe läuft ein RAIDZ1 aus drei Disks, und seine Werte nach dem Umbau auf Mirror stehen ja noch aus. Du planst einen normalen 2er-Mirror, und der ist für VM-Storage eh die bessere Wahl...
Meine langjährigen Erfahrungen dazu:
Bei den genannten AIO Systemen - insbesondere für den Einsatz im Homelab - ist das mit den Updates aus Gründen der Sichherheit zu vernachlässigen. Wenn es läuft und es keine Stabilitätsprobleme gibt, haben...
Hi
i am new in PMG and startet a test-installation to find out, if its working for me.
Its not easy to get some configuration help without an existing subscription...
e.G. i want to use an recipient verification based on LDAP.
We have some...
Even if the logic was get the currenty highest vmid, then use that next available, then only reuse vmid's once you reach your upper limit, at which point those older ids are probably less likily to hit issues, if you have a high churn. Of course...
We are observing a memory utilization discrepancy for a Windows VM running on Proxmox VE.
The memory usage reported at the Proxmox host/VM level is significantly higher than the actual memory utilization observed inside the Windows VM, even when...
I'm used to the Proxmox web GUI. I like it. My muscle memory is built around it. But every once in a while the shit hits the fan (network's borked, a bridge network config went sideways, the web UI won't load...) and I end up on the local console...
I patched up to 9.2.21 and 20.2.4 for ceph. I had to do this on each node
# systemctl restart pvestatd
# systemctl restart pvedaemon
# systemctl restart pveproxy
There were lots of these in the logs. Everything worked fine but the UI was...
Moin, das kann man eigentlich ganz gut trennen: Rechte und Power-Management über PVE, den eigentlichen Zugriff aber nicht über die noVNC-Konsole. Pack pro Entwickler (oder pro Team) die VMs in einen eigenen Pool und gib dem User darauf die Rolle...
Moin, das kann man eigentlich ganz gut trennen: Rechte und Power-Management über PVE, den eigentlichen Zugriff aber nicht über die noVNC-Konsole. Pack pro Entwickler (oder pro Team) die VMs in einen eigenen Pool und gib dem User darauf die Rolle...
I updated all 3 nodes to the new released -22 kernel and removed the workaround. they all booted as they should and nics working as intended.
my problem is solved.
hallo, ich unterhalte einen vollautomatisierten Mirror aller x86 7.x Kernels auf Github, sollte dies jemand benötigen :
https://github.com/bitranox/pve-x86-V7-kernel
Seems it should be tpm-tis-device but proxmox generates "tpm-tis" as option for qemu?
root@pve-arm01:~# qemu-system-aarch64 -device help | grep -A2 -B2 tpm
name "tmp422", bus i2c-bus
name "tmp423", bus i2c-bus
name "tpm-tis-device", bus System...
Ich mag diese Abkürzung überhaupt nicht, BS ist in meinem Kopf für Bullshit reserviert und das ist der PBS absolut nicht.
@Falk R. hat ja schon ziemlich gut beschrieben wie das laufen kann. So lange das SAN freien Speicher für LUNs hat und man...
Ich mag diese Abkürzung überhaupt nicht, BS ist in meinem Kopf für Bullshit reserviert und das ist der PBS absolut nicht.
@Falk R. hat ja schon ziemlich gut beschrieben wie das laufen kann. So lange das SAN freien Speicher für LUNs hat und man...
I updated all 3 nodes to the new released -22 kernel and removed the workaround. they all booted as they should and nics working as intended.
my problem is solved.