Latest activity
-
KKingneutron replied to the thread ZFS over iSCSI: ZVOLs created on iSCSI server but not being mounted on PVE box.Try it without CHAP authentication, AFAIK there is no way to provide that from the PVE GUI " Storage / Add Iscsi " anyway. Just make sure things are properly firewalled
-
UdoB replied to the thread PBS HTTP request timeout issue.add more Ram to increase the ARC and/or experiment with "cache=meta-data-only" add some good NVMe/SSDs as a mentioned "Special Device"; note that only new data will land there - but there is a helping command for this experiment with a Cache... -
KThat's very similar to LVM, which is actually supported. If you don't need the other features of ZFS or BTRFS, just use LVM where only one file or virtual disk will be partly on one drive and party on the other (or use two separate VG to prevent...
-
KIf you spread out data over N drives then you have roughly N-times as much chance of a drive failure. If you don't have redundancy (you want 8+4=12) then there is no duplicate copy of the data and it is gone when the only copy is lost (due to a...
-
KPossible, but that would make it a RAID0 (a single stripe in ZFS terms) and you might lose all data when one of the drives fails. This can also be done with LVM and BTRFS. Anyway, be careful as you double your chances to lose data from a drive...
-
LThanks! /etc/pve/jobs.cfg was what I needed.
-
Aalexskysilk replied to the thread Proxmox PVE will crash out when Win Server 2025 and MS SQL 2025 is used..Not addressing the specific complaint (others are already) but two items to consider: 1. https://blogs.damiendye.uk/en/proxmox/q35-not-i440fx/ according to this its possible and even likely i440fx will be deprecated in the future. 2. note your...
-
UdoB replied to the thread PBS HTTP request timeout issue.You get the IOPS of a single rotating disk. This is the worst case scenario. By far. At the beginning everything works, and you start putting actual backups on it. Then the number of chunks increases. Massively. Then you reach a point where (for...
-
EEAMUNDSON replied to the thread In a 3-node Proxmox Cluster, when one node is rebooted, VMs on other nodes experience momentary packet loss..I'm not disputing that it could be something in the switching. However - these ports are not running spanning-tree, so I find it troublesome if that is the problem. I do have a change window next week to put the ports into 'portfast' or...
-
PPeter90 replied to the thread doing crazy things with proxmox - today: try ressource constrained device :).I Need to unlock amd-v on the Igel m340c processor 424c instead of 412. The bios is from the year 2019 (not 2018). Is there anyone who change this bios with efivar. Which adresses do i have to change? Or has somebody a changed bin who he can share?
-
niteshadow replied to the thread Proxmox PVE will crash out when Win Server 2025 and MS SQL 2025 is used..What are the exact specs (CPU/RAM/Storage) for the host ? Using NUMA: do you have multiple CPUs ? -
It should also be noted that the full documentation to upgrade from PVE 8 to 9 is available here: https://pve.proxmox.com/wiki/Upgrade_from_8_to_9 This documentation also includes a list of known issues, a checklist and gotchas you may come across.
-
Ppaulywog66 replied to the thread Locked out proxmox GUI Because of TOTP (2FA) (SOLVED).OMG, you guys are the best. I just got locked out of my cluster and followed titidlh process for adding another admin account but I couldn't fully manage my cluster and I still couldn't login with my root account that had 2FA. I tried to delete...
-
After using ZFS instead of BTRFS for several months, I no longer have any problems.
-
DDennigma replied to the thread [SOLVED] Regression in 7.0.14-20-pve: Realtek RTL8168h/r8169 fails with PCIe AER/DPC error – 7.0.14-19-pve works.I was able to free one host for testing: tested the new 7.0.14-21-pve kernel on the affected host (pve3). Unfortunately, 7.0.14-21-pve still reproduces the issue without any workaround. Hardware: Realtek RTL8168h/8111h PCI ID: 10ec:8168...
-
Ppaulywog66 reacted to titidlh's post in the thread Locked out proxmox GUI Because of TOTP (2FA) (SOLVED) with
Like.
Hi everyone, It's my first post, so I'm not sure I was supposed to post it here, but anyways, it could help So I tried to add new features to my proxmox recently, especially 2FA It works like a charm, I could use my Google authenticator for... -
Ppaulywog66 reacted to grodrigo's post in the thread Locked out proxmox GUI Because of TOTP (2FA) (SOLVED) with Like.
I've found a command to delete the 2FA via ssh pveum user tfa delete root@pam
-
Ppaulywog66 replied to the thread Locked out proxmox GUI Because of TOTP (2FA) (SOLVED).I just ran into a similar problem with 2FA. I disabled it but I was still being challenged to use backup codes. Unfortunately the codes I have didn't work. Thanks so much for posting this. It totally helped me get back into the GUI.
-
Kkaputt replied to the thread [SOLVED] Synology NAS in Paperless LXC über Proxmox.warum die NFS Shares nicht direkt in Paperless mounten? Gruß aus L.E. Uwe
-
Rrachelwilson replied to the thread In a 3-node Proxmox Cluster, when one node is rebooted, VMs on other nodes experience momentary packet loss..this is almost certainly the switches, not proxmox. when you reboot a node its ports flap, the arubas send spanning tree topology change notifications, and both switches flush their mac tables. traffic has to relearn for a few seconds which is...