Latest activity
-
Sscottk8 replied to the thread Proxmox VE GUI won't load after upgrade.Doh, missed it. Output follows:- ... Oct 01 16:00:40 pve systemd[1]: Starting pveproxy.service - PVE API Proxy Server... Oct 01 16:00:41 pve pveproxy[10119]: start failed - unable to create socket - Address already in use Oct 01 16:00:41 pve...
-
Sscottk8 replied to the thread Proxmox VE GUI won't load after upgrade.Output of journalctl -xeu pveproxy.service:- ░░ The job identifier is 5708 and the job result is failed. Oct 01 16:00:41 pve systemd[1]: pveproxy.service: Consumed 1.261s CPU time, 149.8M memory peak. ░░ Subject: Resources consumed by unit...
-
bbgeek17 replied to the thread Proxmox VE GUI won't load after upgrade.There was a typo in the journal command - extra p at the end, did you fix it by chance in your run? Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
MManuS replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.Hello Stoiko, A quick update regarding the pci=notph testing. I started a new test using the same setup: - kernel 7.0.14-20-pve - pci=notph enabled I can confirm that the parameter is active: BOOT_IMAGE=/boot/vmlinuz-7.0.14-20-pve...
-
Sscottk8 replied to the thread Proxmox VE GUI won't load after upgrade.Output of pveversion -v follows. The jounalctl command gave me a No entries response. proxmox-ve: 9.2.0 (running kernel: 7.0.14-20-pve) pve-manager: 9.2.21 (running version: 9.2.21/4f6e0ac86f9e8c7f) proxmox-kernel-helper: 9.2.0...
-
bbgeek17 replied to the thread Proxmox VE GUI won't load after upgrade.You can try to run the pveproxy manualy to see the error you are getting: pveproxy start or pveproxy start --debug 1 Looking at the log, as @fabian suggested, should, of course, be the first step. Blockbridge : Ultra low latency all-NVME shared...
-
Eevsmetal replied to the thread PVE 9 and iDRAC service module dcism.I was hoping to find a solution here. I found the Systems-Management_Application_WMJ1N_LN64_5.4.2.0_A00_02.BIN and installed the dcism and dcism-osc files with no issue. But the service never installed. systemctl start dcismeng Failed to start...
-
bbgeek17 replied to the thread After Upgrading from v8 to 9.2, one node cannot resolve DNS.Your /etc/resolv.conf is a symlink to systemd-resolved's generated file (as evident by the text at the start), and resolved has no DNS servers, hence "No DNS servers known." Removing the package leaves the symlink behind, pointing at a stale...
-
CCoop replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.Just chiming in and wanting to follow, we also had problems with this. Everything was working great with 7.0.14-19, but not with 7.0.14-20. Dell Server Broadcom 57414 Firmware: 23.11.16.22
-
Rrage replied to the thread sparsame Hardware.Ich nutze einen NUC14 135H mit PL1:16W PL2:26W (TAU 56). Damit ist er gut sparsam und trotzdem leistungsfähig wenn benötigt. Er kann 2 m.2 (2280/2242), kann 128GB RAM und hat mit den LPE Kernen auch die Möglichkeit VMs sehr stromsparend zu...
-
Sscottk8 posted the thread Proxmox VE GUI won't load after upgrade in Proxmox VE: Installation and configuration.Hello all. I ran a kernel upgrade today from within the GUI and it all seemed to go through fine but after rebooting the GUI no longer loads. The server is running and my containers are running but when I run 'systemctl status pveproxy.service' I...
-
bbgeek17 replied to the thread [TUTORIAL] PVE 9.2 ARM64 on ASUS GX10 (GB10): 6 GB/s of NVMe/TCP out of the box, 29 GB/s after two kernel flags.Hi @Nemesiz, it's just a little console tool we wrote for this project. One Python script on top of the Rich library: https://github.com/Textualize/rich. Strictly read-only: it pulls from /sys/class/net, /proc/stat, /proc/interrupts, the CPPC...
-
Ffwcheck replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.I can basically confirm your findings, we have the following trouble: 7.0.14-20 Network connectivity on an empty host fails after a short time with ================ NETDEV WATCHDOG: CPU x; transmit queue 1 timed out 5700 ms bnxt_en...
-
DDBailey635 posted the thread After Upgrading from v8 to 9.2, one node cannot resolve DNS in Proxmox VE: Installation and configuration.Hi, I've just updated five Dell hardware- and config-identical Proxmox VE nodes from v8 to 9.2, and while four of them work fine, the fifth one cannot resolve DNS. I cannot therefore apply further updates. The output of cat /etc/resolv.conf on...
-
DDennigma replied to the thread [SOLVED] Regression in 7.0.14-20-pve: Realtek RTL8168h/r8169 fails with PCIe AER/DPC error – 7.0.14-19-pve works.Thanks, I tested pci=notph on the affected pve3 host with 7.0.14-20-pve. Unfortunately, it does not resolve the issue. The parameter is definitely active: BOOT_IMAGE=/boot/vmlinuz-7.0.14-20-pve ... pci=notph PCIe TPH is disabled However, the...
-
bbgeek17 replied to the thread Thin Pool `vg_hdd-data-tpool` stuck with open count 1, preventing volume deactivation and reboot.LVM is not my area of expertise, but here are a few things to try and report back: 1. An open count of 1 on -tpool is normal while the pool is active. It's the internal pool device, held open by the thin LVs and by dmeventd monitoring. lvchange...
-
MManuS replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.Hello Stoiko, I performed the test with: pci=notph and booted again on kernel 7.0.14-20-pve. The system remained operational longer than before, however the issue eventually reoccurred and the host finally rebooted. The most interesting...
-
Falk R. replied to the thread EFI, TPM Partitionen.Ist bei mir nie passiert, aber ich habe auch nur 2x Win10 nach 11 geupgraded. Wenn du beim PVE bereits eine TPM Disk und EFI Disk drin hast, macht er das trotzdem? -
Stoiko Ivanov replied to the thread [SOLVED] Regression in 7.0.14-20-pve: Realtek RTL8168h/r8169 fails with PCIe AER/DPC error – 7.0.14-19-pve works.see https://forum.proxmox.com/threads/proxmox-ve-9-2-21-bcm57412-bnxt_en-network-failure-after-upgrade-to-kernel-7-0-14-20-pve.186749/ for an issue that might be related. if possible try booting with `pci=notph` (see the linked thread for other... -
MMarro A. posted the thread Rule-database sync triggers false Net::SMTP 421/451 after successful reinjection, causing duplicate delivery in Mail Gateway: Installation and configuration.Hello, we are investigating recurring duplicate deliveries on a Proxmox Mail Gateway cluster node. The evidence indicates that a rule-database synchronization triggers SIGUSR1 while a filter worker is reinjecting a message through local Postfix...