Latest activity
-
Ddaveanderson replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.We have had issues with bnxt_en on and off on our hosts (see here: https://forum.proxmox.com/threads/broadcom-bcm57504-100g-bnxt_en-tx-timeout-and-nic-reset-on-proxmox-8-1-5-—-while-bcm57414-25g-works-fine-on-same-host.179837/#post-860714) For...
-
news reacted to celemine1gig's post in the thread Slow/hanging Proxmox consoles after upgrade to 9.2.20 (from 9.2.4) with
Like.
You are on RaptorLake-S (judging by the PCI IDs) and are seeing issues where such a relatively old Kernel (in relation to the platform itself) is performing better, than a newer one? What motherboard are we talking about? This sounds a bit like a... -
Ddaveanderson replied to the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host.7.0.14-20 fails just after boot entirely predictibly for us. I have not seen it last longer than about 5 minutes before the host becomes unreachable on admin interfaces, ceph dies, etc. -Dave
-
Ccelemine1gig replied to the thread Slow/hanging Proxmox consoles after upgrade to 9.2.20 (from 9.2.4).You are on RaptorLake-S (judging by the PCI IDs) and are seeing issues where such a relatively old Kernel (in relation to the platform itself) is performing better, than a newer one? What motherboard are we talking about? This sounds a bit like a...
-
SInisterPisces reacted to chrcoluk's post in the thread Proxmox with ZFS + SSDs: Built-in TRIM cron job vs zfs autotrim? with Like.
You are right it isnt live yet, this is the future behaviour once the appropriate package comes in the future. If you mean the check to see if queued trim is supported or not, its not overcomplicating it, the lsblk command isnt satisfactory to... -
Pphgamer replied to the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)!.would this arm board work for proxmox? https://store.metacomputing.io/products/metacomputing-aipc?variant=50604798607666
-
Rrmnrdi posted the thread Proxmox v9.2 installer freezes in Proxmox VE: Installation and configuration.I've been trying to install Proxmox v9.2 for 4 frustrating hours. Here's my system specs: MSI B550-A Pro Ryzen 7 5800X 64GB DDR 3200 RAM 2 TB Samsung Pro NVME 1 TB Samsung 860 SATA SSD RTX 3060 TI RXT 3080 My BIOS is in AHCI NOT RAID and my...
-
TTacioandrade replied to the thread Does Proxmox accept external contributions/patches for projects such as PDM?.Thanks a lot! I’ll go through the documentation and see if I can contribute to the project. I probably don’t have the experience needed to work on lower-level components, such as KVM patches or similar things, even though I have a Computer...
-
TTacioandrade reacted to bbgeek17's post in the thread Does Proxmox accept external contributions/patches for projects such as PDM? with Like.
Hi @Tacioandrade , I believe most if not all of your questions about coding are covered here: https://pve.proxmox.com/wiki/Developer_Documentation As for the goal alignment, that is a more appropriate discussion for PDM list here...
-
bbgeek17 replied to the thread Does Proxmox accept external contributions/patches for projects such as PDM?.Hi @Tacioandrade , I believe most if not all of your questions about coding are covered here: https://pve.proxmox.com/wiki/Developer_Documentation As for the goal alignment, that is a more appropriate discussion for PDM list here... -
TTacioandrade posted the thread Does Proxmox accept external contributions/patches for projects such as PDM? in Datacenter Manager: Installation and configuration.Hello everyone, I've been using Proxmox since around 2013 and, over the years, I've participated in the community through the forums, Bugzilla, and other channels. Recently, I've been considering contributing directly to the project...
-
UdoB reacted to ghusson's post in the thread Host shell fails to start, cluster with failed nodes with Like.
connect through SSH issue this command : pvecm expected 1 now you can operate, but warning : there is no split brain mecanism example : move vm configuration files to the remaining host directories in order to boot them (if storage is available). -
LLazyy_MP3 posted the thread Proxmox Data Center Manager Resource View in Proxmox VE: Installation and configuration.I've just updated my Data Center Manager to 1.1.7, its nice having a view over all my device resources but i'd like to be able to see used resources for individual nodes, mainly to use as a dashboard by my network rack, is this possible some how...
-
UdoB reacted to bbgeek17's post in the thread [TUTORIAL] PVE 9.2 ARM64 on ASUS GX10 (GB10): 6 GB/s of NVMe/TCP out of the box, 29 GB/s after two kernel flags with Like.
One more GX10 post, the last one for now. After battling the black screen, the hard resets and the power cap, we were finally able to see what this box and PVE on arm64 can do. Out of the box, the kernel initiator managed NVMe/TCP reads at 6.3...
-
Ddiorgardner replied to the thread FTI Compliance/IRS Audit.This is USA and I have contacted them just thought I'd check here also. Thank you. I will looks into this. Thank you.
-
DMaybe you can look at basic analysis provided by tird party programs as ProxCenter and PegaProx ?
-
Das ist insofern problematisch, weil man dann vom qdevice mit ssh als Root auf die Cluster-Knoten kann und umgekehrt. @UdoB hat beschrieben, wie sich das absichern lässt...
-
JJohannes S replied to the thread Shared LVM gewünscht: FC-SAN?.Das ist insofern problematisch, weil man dann vom qdevice mit ssh als Root auf die Cluster-Knoten kann und umgekehrt. @UdoB hat beschrieben, wie sich das absichern lässt...
-
Korrekt, auf den Knoten muss aber auch ein Dienst laufen, das steht aber auch alles in der Doku erklärt: https://pve.proxmox.com/wiki/Cluster_Manager#_corosync_external_vote_support Anders als bei den Knoten braucht der NICHT eine dezidierte...
-
bbgeek17 replied to the thread Proxmox PVE will crash out when Win Server 2025 and MS SQL 2025 is used..@Francois Baillargeon , the VirtIO version is mentioned in the opening post, and it appears to be the latest version. That said, a VM should not normally be able to hard-crash the hypervisor host. Even in the case of memory exhaustion, I would...