Latest activity
-
Stoiko Ivanov replied to the thread Cannot login with 2FA enabled.any other messages in the journal around the time of logging in? else - check /etc/pmg/tfa.json if it looks sane (don't share it publicly) also check `debsums -ac` for any modifications to the installed packages. do you see any errors in the... -
Kthanks, i will reinstall the iso image
-
Iinformant replied to the thread qcow2 file is bigger as hdd config.discard = it was activated in gui on all qcow2 hdds. manually i have shrink too^^ look my post on top
-
Bbellaireroad replied to the thread installation failure.thanks, i will reinstall the iso image
-
BIt looks like there may be an issue with the installation media. Please verify that the downloaded ISO image is not corrupted and that it was written correctly to the installation media...
-
Eeilko replied to the thread Cannot login with 2FA enabled.time setings are ok. The login is always succesful, but immiditaly shows anoher totp screen below the license popup. No different in Brave browser, Safari, or in incognico screen. logs shows three times succesful login per try. Sep 22...
-
Ddmpm replied to the thread [SOLVED] Node crashes when trying to update to proxmox-kernel-7.0.14-19.There doesn't seem to be anything critical there. journalctl -b-1 -krp warning Sep 22 16:33:49 pve-oakwood-3 kernel: faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 Sep 22 16:33:49 pve-oakwood-3 kernel...
-
GPlease use code blocks, not quotes. I see that you're not using discard. Maybe some of this is useful to you - https://gist.github.com/Impact123/3dbd7e0ddaf47c5539708a9cbcaab9e3#discard - https://pve.proxmox.com/wiki/Shrink_Qcow2_Disk_Files
-
Kkawano-y replied to the thread installation failure.It looks like there may be an issue with the installation media. Please verify that the downloaded ISO image is not corrupted and that it was written correctly to the installation media...
-
SteveITS replied to the thread [SOLVED] Issues with New Install, loosing access to VMs.I had not seen/encountered that yet. The last comment says "AFAICT this should be fixed in c1290c4d1334350a3ba84c8745eb230f077bf9a3 / libpve-storage-perl >= 9.1.10" ...? Which is what we have installed. In the other thread about the shutdown... -
Bgetting this error on installation, where would you proceed? thanks
-
-
Ddmpm reacted to Impact's post in the thread [SOLVED] Node crashes when trying to update to proxmox-kernel-7.0.14-19 with
Like.
Can you try to grab the crash message? It might be printed to a connected monitor or be visible in journalctl -b-1 -krp warning. -
Fflashkostya reacted to MDSOperator's post in the thread Proxmox VE 7 is vulnerable to some type of 0day/RCE non auth with Like.
Proxmox VE 7.1 - cryptojacking rootkit + root SSH backdoor: full teardown TL;DR Two PVE 7 hosts were compromised and running an XMRig cryptominer hidden by a preload rootkit. The same "install_and_mine.sh / libhide" toolchain planted: A...
-
Nneil2048 replied to the thread [SOLVED] Issues with New Install, loosing access to VMs.So you are absolutely correct that is the issue, stopping the OSD's first keeps the VM's online, however once all back and working, taking this one stage further and simulating a host failure (hard power pull) exhibits the same behavior where...
-
Ddmpm replied to the thread [SOLVED] Node crashes when trying to update to proxmox-kernel-7.0.14-19.Damn! Seems I spoke to soon. It's crashing again when doing multi-thread decompress, even with the governor set to powersave and adding "nvme_core.default_ps_max_latency_us=0" to the grub commandline. I'm going to check the C-States setting in...
-
https://bugzilla.proxmox.com/show_bug.cgi?id=8065 -
Llukeh990 replied to the thread PVE Firewall Dropping NDP NS?.https://bugzilla.proxmox.com/show_bug.cgi?id=8065
-
SteveITS replied to the thread [SOLVED] Issues with New Install, loosing access to VMs.Sounds like https://bugzilla.proxmox.com/show_bug.cgi?id=7827 "Powering off a Ceph node stalls Ceph IO" which links to another forum thread here. Ceph 19 is EOL next month, but that should not be relevant to your problem...
-
Kkawano-y reacted to dmpm's post in the thread [SOLVED] Node crashes when trying to update to proxmox-kernel-7.0.14-19 with Like.
Thanks. Yeah it seems it was old CPU microcode that was causing it. I think it's fixed now. I was worried my CPU, RAM or NVMe was faulty as I bought this machine on ebay a few days ago and I was worrying about having to return it.
-
Stoiko Ivanov replied to the thread Cannot login with 2FA enabled.* As the others said - please verify that the clock is in sync (between the device you use for TOTP code generation and your PMG) * else - please check if the journal has a pointer at what is not working * if this doesn't help please post...
