Latest activity
-
Ddmpm replied to the thread [SOLVED] Node crashes when trying to update to proxmox-kernel-7.0.14-19.Thanks. Yeah it seems it was old CPU microcode that was causing it. I think it's fixed now. I was worried my CPU, RAM or NVMe was faulty as I bought this machine on ebay a few days ago and I was worrying about having to return it.
-
Ddmpm reacted to kawano-y's post in the thread [SOLVED] Node crashes when trying to update to proxmox-kernel-7.0.14-19 with
Like.
This might be caused by a node-specific hardware issue, such as the power supply, NVMe drive, CPU power management, temperature, or memory. You may also find this similar thread helpful... -
Kkawano-y replied to the thread [SOLVED] Node crashes when trying to update to proxmox-kernel-7.0.14-19.This might be caused by a node-specific hardware issue, such as the power supply, NVMe drive, CPU power management, temperature, or memory. You may also find this similar thread helpful...
-
TTErxleben replied to the thread Win11 ewige Baustelle.Danke für deinen Klaps auf den Hinterkopf. pagefile hat hier tatsächlich irgendein Künstler deaktiviert.
-
shanreich replied to the thread PVE Firewall Dropping NDP NS?.not for this specific problem iirc! Feel free to open one and mention the forum thread here -
Llukeh990 replied to the thread failed to query local AF_VSOCK CID.I've seen the same message on some of my VMs. Doesn't seem to affect anything though.
-
DAVe3283 replied to the thread [SOLVED] Root on encrypted ZFS boot issue suddenly.ThreadReaper (node with issue) root@ThreadReaper:~# pveversion -v proxmox-ve: 9.2.0 (running kernel: 7.0.14-17-pve) pve-manager: 9.2.20 (running version: 9.2.20/49318c671b82f31e) proxmox-kernel-helper: 9.2.0 proxmox-kernel-7.0.14-17-pve-signed... -
Llukeh990 replied to the thread PVE Firewall Dropping NDP NS?.Is there a bugzilla report open for this? If not I'd be happy to put one in.
-
Nneil2048 replied to the thread [SOLVED] Issues with New Install, loosing access to VMs.Hi Also we are running Proxmox 9.2.20, with Ceph 19.2.6. Thanks
-
Nneil2048 replied to the thread [SOLVED] Issues with New Install, loosing access to VMs.Hi You are correct Ceph Health goes Yellow, its probably worth stating that i have also finagled the OSD ID's to correspond to the Host and Drive bay number, but when all hosts are online, Ceph is Green. So if we shut down node 2 (which has...
-
-
shanreich replied to the thread PVE Firewall Dropping NDP NS?.This happens for every interface that is member of a bridge (as eno1 is, according to your network configuration), since we're using the bridge hooks for firewalling. As you can see the packet ultimately gets accepted, as it is not included in...
-
bbgeek17 replied to the thread qcow2 file is bigger as hdd config.You could try virt-sparsify on your file to see if that helps. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
Mmow replied to the thread Win11 ewige Baustelle.Wie hast Du das kontrolliert? Kann das sein, daß Du die Auslagerungsdatei deaktiviert hast?
-
Rroland155 replied to the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)!.i ave after boot installer proxmox black scren
-
Llukeh990 replied to the thread PVE Firewall Dropping NDP NS?.Ran nft list ruleset and pulled the relevant sections table inet proxmox-firewall { chain default-in { iifname "lo" accept jump allow-icmp ct state vmap { invalid : jump invalid-conntrack...
-
Llukeh990 replied to the thread PVE Firewall Dropping NDP NS?.Maybe a quick note for the documentation, the NFT trace log doesn't appear in the WebUI firewall log. I spent like 10 minutes scratching my head on why I didn't see any trace messages. Had to run nft monitor trace. But I did get a good trace...
-
JJohannes S reacted to sirbryan's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
I spent this summer building a custom kernel for the MikroTik CCR2116 router and the RDS2216 server. Both use the Annapurna Labs Alpine AL73400, which is a 16-core 2GHz ARMV8-A processor (used in Amazon Graviton 1), with 16 or 32GB of RAM. I...
-
dcsapak replied to the thread Remote tape connection.aside from using the tape drive/changers via iscsi there is no other possibility at the moment. we only do datastore-> tape backup, not direct to tape, nor can we 'mount' a foreign pbs datatstore (e.g. for locking reasons) using it via iscsi... -
dcsapak replied to the thread [SOLVED] proxmox-tape barcode-label got timeout.Hi, not sure what is happening, but we'll hopefully find out :) no manually adding will not help since the labeling also includes writing the first block to the tape (our 'media' header) can you post the output of dmesg after a failed (manual)...
-
JJohannes S reacted to J-Rod's post in the thread Storage setup? Separate OS and data drive? ZFS + Slog? with Like.
I propose two potential configurations: 1) Use the largest available Optane for the OS. During PVE install, select ZFS but leave some space at the end of the disk for swap. Use this drive for some VMs/etc. as appropriate. Add 2TB consumer SSD...
