Latest activity
-
Ssirbryan replied to the thread Testing Proxmox VE on Ampere Altra Max (Armv8).For those interested on moving from PXVirt (8.x) to PVE 9, I successfully upgraded my Ampere box from the PXVirt port to PVE 9.2.10 by following the upgrade steps for 8 to 9 and the Raspberry Pi 5 instructions: pve8to9 showed what needed to be...
-
news reacted to UdoB's post in the thread Storage setup? Separate OS and data drive? ZFS + Slog? with
Like.
That's easy: get two "Enterprise class" NVMe with PLP. (But prepare for a heart attack while looking up prices.) Then run everything on this single mirrored vdev - on ZFS of course. You asked for "best performance" - and personally I do always... -
MMightyMauz reacted to leesteken's post in the thread Storage setup? Separate OS and data drive? ZFS + Slog? with Like.
ZVOLs also use CoW (like everything else on ZFS, which also makes it relatively slow) and new metadata especially never overwrites old metadata. It's always written separately and only when it's actually on the drive (synchronously) then the old...
-
Wwindowsdesxtop replied to the thread [SOLVED] Proxmox-backup logs.@dcsapak unfortunately for my pbs 4.2.2 it doesn't work > | task-log-max-days | 2 | But it keeps collecting... I manually have to do > find /var/log/proxmox-backup -mtime +7 -delete
-
Rrevmarkp reacted to the_nid's post in the thread VFIO: Firmware has requested this device have a 1:1 IOMMU mapping with Like.
I just ran into a very similar (identical?) problem you're describing here. Hardware: MSI PRO B850M-A WIFI (MS-7E66), AMD Ryzen 9 9900X, AMD RX 9070 XT OS: Proxmox VE 9.2.11, kernel 7.0.14-16-pve Flashed my MSI motherboard (was on BIOS version...
-
Jyou can either automate pruning snapshots, or not give users that abuse it the right to create them in the first place.
-
JProblem is not that there are so many snaps. I think they are a tool and should be used whenever it makes sense. But one by one removal is not nice for PVE admins as well as for users that created those snaps. If we could select and remove...
-
JJohannes S reacted to leesteken's post in the thread Storage setup? Separate OS and data drive? ZFS + Slog? with Like.
ZVOLs also use CoW (like everything else on ZFS, which also makes it relatively slow) and new metadata especially never overwrites old metadata. It's always written separately and only when it's actually on the drive (synchronously) then the old...
-
bbgeek17 reacted to alexskysilk's post in the thread [TUTORIAL] Why LVM-Thin Cannot Be Shared Storage in Proxmox with Like.
@bbgeek17 no disagreement. I was simply pointing out that the premise that a full node fence is required isnt necessarily true for the proposed solution to work. I'm not suggesting its easy, not fraught with gaping holes, probably too slow to be... -
bbgeek17 replied to the thread Error when trying to remove a previously physically removed node.Sorry, I missed the forum name - that documentation/procedure is for the PVE Cluster. If you have collection of single nodes under PDM, take a look at this thread: https://forum.proxmox.com/threads/how-to-remove-node-from-remotes.163437/...
-
JJohannes S reacted to leesteken's post in the thread Storage setup? Separate OS and data drive? ZFS + Slog? with Like.
The 16GB Optane might be useful as a SLOG or a special device (but the redundancy must at least match the data redundancy). I fear that the 58GB and especially the 375GB might be hybrid drives with 2 PCIe lanes connected to a small Optane and...
-
JJohannes S reacted to Dutch87's post in the thread AMD pstate driver steps and discussion with Like.
It did, but barely, it saved me 4-6 watt's at most and it was only due to enable-C states and PCI-E L0s en L1. But that made the system unstable. For a Zen3 cpu en B550 motherboard I STRONLY recommend to disable C-States and PCI-e power states...
-
JJohannes S reacted to Onslow's post in the thread How granular is QEMU Guest Agent's ability to report on RAM usage inside a Guest VM? with Like.
@AkUsP 1) MRTG (Multi Router Traffic Grapher) https://oss.oetiker.ch/mrtg/ A basic one. For switches, routers [edit: and network printers] etc.: you can graph (and monitor for values exceeding thresholds) any data which a device can show with...
-
JJohannes S reacted to alexskysilk's post in the thread [TUTORIAL] Why LVM-Thin Cannot Be Shared Storage in Proxmox with Like.
@bbgeek17 no disagreement. I was simply pointing out that the premise that a full node fence is required isnt necessarily true for the proposed solution to work. I'm not suggesting its easy, not fraught with gaping holes, probably too slow to be...
-
Bbishoptf replied to the thread Error when trying to remove a previously physically removed node.This is not a cluster, just individual nodes that have been brought into datacenter manager. I came across that command but since it wasn't a cluster wasn't sure if that was still the process. I assume that is the process for none cluster nodes also?
-
MMightyMauz replied to the thread Storage setup? Separate OS and data drive? ZFS + Slog?.Hmm, I was under the impression that a special vdev wasn't particularly useful, as most data is in zvols anyway. But maybe I am wrong. Why is ZFS so difficult? Now I get all crazy frankenstein setups in my head. Maybe divvy up the 58gb as 50%...
-
Bbishoptf reacted to bbgeek17's post in the thread Error when trying to remove a previously physically removed node with Like.
Hi @bishoptf , Have you checked the cluster guide? https://pve.proxmox.com/pve-docs/chapter-pvecm.html#_remove_the_cluster_node Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Error when trying to remove a previously physically removed node.Hi @bishoptf , Have you checked the cluster guide? https://pve.proxmox.com/pve-docs/chapter-pvecm.html#_remove_the_cluster_node Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
Bbishoptf posted the thread Error when trying to remove a previously physically removed node in Datacenter Manager: Installation and configuration.I have a remote node that I am trying to remove that has already been physically removed, error message is - "api error (status = 400: error deleting token: connection failed: client error (Connect))" Thats the error message that I receive from...
-
RRomainp posted the thread Proxmox backup client flows in Proxmox Backup: Installation and configuration.Hi all! What pretentious title for this post ! :) Sorry for that but I want to sahre the frustration that I had (or maybe my completly false misunderstanding) for that proxmox backup client tool. First, let me say that I really like PBS as a...