Latest activity
-
Eeilko posted the thread Cannot login with 2FA enabled in Mail Gateway: Installation and configuration.Hi anyone have the same issue? I need to login to my PMG server (pmg-api/stable,now 9.1.2) and after entering username/password I get an option to enter 2FA. After I enter the code I get the "license popup". Clicking on OK I get the 2FA popup...
-
Mmajor caveira replied to the thread failed to query local AF_VSOCK CID.Same message here
-
Hhenryd99 reacted to Johannes S's post in the thread How granular is QEMU Guest Agent's ability to report on RAM usage inside a Guest VM? with
Like.
Setup a real monitoring system like zabbix, prometheus, checkmk or icinga in a dedicated vm or lxc and put the agent of your chosen monitoring tool inside your guests. Proxmox dashboards will never have the same features set and reliability. -
Mmouse51180 replied to the thread Console give "Error: Raw channel missing property".I have tried this inside Edge and Chrome and also over the firewall VPN and from a local device and get the same issue. I believe it started roughly after we updated to v9.2.10 :(
-
Mmmercier posted the thread Feature idea: saferemove mode to skip forced zero-write (blkdiscard --zeroout) on storage that guarantees zero-after-discard (e.g. NVMe DLFEAT) in Proxmox VE: Installation and configuration.Hello, I'd like to gauge interest before filing this on Bugzilla - wanted to check the reasoning holds up and that I'm not missing an existing option. Background: I run Proxmox VE on shared LVM backed by Dell PowerStore arrays over NVMe/TCP...
-
news replied to the thread Storage setup? Separate OS and data drive? ZFS + Slog?.you need minimum 2 Devices for zfs with one vdev as mirror with flash memory. but normal nvme m.2 don't work with zfs. You get only about 40 - 80 MByte/s 4k random read/ write. the nvme m.2 need DRAM and PLP, and you also need a USV. So get a... -
Ssantiagobiali replied to the thread H330 sas controller failed after upgrading to Kernel 6.17.2-2-pve.Host Kernel Storage Cards Dell R740 7.0.14-15-pve PERC H740p (Firmware 51.16.0-5150-megaraid) (RAID-10), LSI 9400-8e (HBA)(Firmware 24.00.00.00) (ZFS S+M) Dell R740XD 7.0.14-15-pve PERC H330 (Firmware...
-
news replied to the thread IOMMU groups for specific B760M motherboard.For the BIOSTAR B760MX2-E PRO D4 with some other pcie cards installed. IOMMU group 0 00:02.0 VGA compatible controller [0300]: Intel Corporation Alder Lake-S GT1 [UHD Graphics 730] [8086:4692] (rev 0c) IOMMU group 10 00:1f.0 ISA bridge [0601]...
-
news replied to the thread IOMMU groups for specific B760M motherboard.You don't need a i5-13500T, just setup PL1 and PL2 with ErP set on. Disable all unused Hardware, Audio, Serial 1. Then choose DDR4 Ram 32000 MT/s CL22 with @1.2 V, that will save Power. like the: Crucial Pro UDIMM 32GB Kit, DDR4-3200...
-
Stoiko Ivanov replied to the thread Mail-Filter stop to work after upgrade to 9.x.hm - haven't heard about single rules breaking upon upgrade - a few pointers: * what's the output of `pmg8to9`? * make sure that you did not accidentally select "All match" in one of the objects in your rule * please post the part of `pmgdb dump`... -
news replied to the thread IOMMU groups for specific B760M motherboard.Hm, a NAS is a NAS so please use raw hardware. Please check the BIOSTAR B760MX2-E PRO D4 with 4x SATA III CPU, 4x SATA III on a Realtek Chip and Realtek RTL8125B 2.5 GBit/s LAN. #...
-
aj@root replied to the thread Host IP in SDN vnet.This allows me to define an IP for the PVE host on the SDN and have it preserved through the generated file changes. It doesn't show up in the GUI at all. I haven't tried it in a cluster setup yet, but by having it in a separate file I expect it... -
Ccelemine1gig replied to the thread IOMMU groups for specific B760M motherboard.Those two marked things clash quite hard. In other words, you probably either want "low power", or you want the 9300-16i. Both will most likely not work out for you. Or for anyone else, for that matter. Edit: The 9300-16i alone requires about...
-
Ssantiagobiali replied to the thread IOMMU groups for specific B760M motherboard.Motherboard: ASUS TUF GAMING B760M-E D4 CPU: i5-13400 cat /etc/kernel/cmdline root=ZFS=rpool/ROOT/pve-1 boot=zfs iommu=pt intel_iommu=on delayacct for d in /sys/kernel/iommu_groups/*/devices/*; do n=${d#*/iommu_groups/*}; n=${n%%/*}; printf...
-
SteveITS replied to the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon.Sorry, I answered quickly...I quoted the doc page which says --verbose is an option. Maybe it will show more info. Are you doing this as root? -
Llvo replied to the thread H330 sas controller failed after upgrading to Kernel 6.17.2-2-pve.Thanks for the recommendation, I'll have a look. Although I'm reasonably versed in consumer products, this homelab is my first exploration of enterprise hardware; picked it up when the server was decommissioned by a corporate. Unhappy to report...
-
Wwursti replied to the thread [SOLVED] pve-cephx-rotate-service-keys error in restrict-ciphers phase "not every monitor answered the session query".That Trick didnt work for me. Tried on a 4-Node Cluster (PVE 9.2.20 / Linux 7.0.14-17-pve)
-
Wwursti replied to the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon.@SteveITS - Install is up to date: PVE 9.2.20 / Linux 7.0.14-17-pve - "add --verbose" --> I do not understand - I ran "--rotate-admin-key --apply" After reading the manual once again, I sopped-started/live-migrated all VMs, then I rebooted all...
-
Llanepark5033 replied to the thread PDM running in LXC and doesn't verify when all backups are verified..Attached is backup job log, shows errors and is probably why the verify failed. I've fixed the error in the job log, but will have to wait until Sat AM for the next sequence of backup/prune/verify/garbageCollection to occur and I'll check...
-
Ccosmetics603 posted the thread IOMMU groups for specific B760M motherboard in Proxmox VE: Installation and configuration.m planning a low-power Proxmox build and trying to pre-validate motherboard choice before buying. Planned specs: i5-13500T, B760 chipset, DDR4 (reusing 64GB from my current nodes), boot from NVMe Goal: pass the entire onboard SATA controller...