Latest activity
-
MMightyMauz posted the thread Storage setup? Separate OS and data drive? ZFS + Slog? in Proxmox VE: Installation and configuration.I am setting up a new proxmox node that will run as all-in-one. It will have database (SQL-server) vms / lxcs self-hosted AI (ollama + Blackwell 4000) I have a mini-itx board with 1 pcie that will be populated by the GPU. It also has 2 m.2...
-
Xxybo replied to the thread Limiting Proxmox SnapShots.Just create a rule in your monitoring service to trigger an alert if there are more than 2-3 snaps or if the snaps are older than 72h
-
JJohannes S reacted to bbgeek17's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with
Like.
A new article for ARM system users covering performance troubleshooting Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
Abobakr reacted to huganega's post in the thread Proxmox VE 9.2 – sporadic iSCSI NOP timeouts / DID_TRANSPORT_DISRUPTED with Dell PowerVault ME5 and Intel E810 with Like.
Update after another full backup cycle and a reboot to the latest Proxmox kernel. The host is now running: Proxmox VE 9.2 pve-manager 9.2.20 kernel 7.0.14-16-pve Dell PowerVault ME5224 2x direct 25 GbE iSCSI ALUA multipath After the reboot... -
Aadrianovf reacted to tschmidt's post in the thread Quick Question About Updates and Repos with Like.
The no-sub repo has newer packages. You would need to wait some day/weeks for them to age out before everything switches over to the enterprise repo. So I suggest not using the no-sub if you can avoid it.
-
Aadrianovf reacted to SteveITS's post in the thread Quick Question About Updates and Repos with Like.
Why avoid using the license? If already purchased it is active. The no sub repo is a bit ahead of enterprise so you might think of that as beta or release candidate. Eventually enterprise will catch up.
-
bbgeek17 replied to the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)!.A new article for ARM system users covering performance troubleshooting Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
bbgeek17 posted the thread [TUTORIAL] PVE 9.2 arm64 on ASUS GX10 (GB10): SoC throttled to 20 W, affecting performance in Proxmox VE: Installation and configuration.Now that the system is "stable" after dealing with the black screen and the watchdog resets, we've started looking at performance. Our first look at storage performance was absolutely terrible. And after some head scratching, learning a bit more...
-
TTErxleben replied to the thread Win11 ewige Baustelle.Nun habe ich auch einen PVE (64GB) mit vier Win10-ArbeitsVMs. Alle haben 12GB-Arbeitsspeicher ohne Ballooning. Bei VM-interner Kontrolle liegen die bei 20% RAM-Auslastung. Der PVE listet natürlich Vollauslastung der VMs. Trotzdem die dusselige...
-
Llanepark5033 replied to the thread PDM running in LXC and doesn't verify when all backups are verified..Yes PDM means Proxmox Datacenter Manager. Yes, LXC 302 is the container running PDM and is on the same PVE whos backup are being verified. Yes the backup solution is a scheduled PVE backup to a PBS and are then pruned, followed by a scheduled...
-
CCookiefamily reacted to bbgeek17's post in the thread [TUTORIAL] Why LVM-Thin Cannot Be Shared Storage in Proxmox with Like.
Hi Everyone, Every few months someone asks some version of "why can't I use LVM-thin on my shared SAN LUN?" Thick LVM works fine as shared storage, but has no native snapshots. LVM-thin has snapshots but is local-only... it's natural to wonder...
-
CCookiefamily reacted to bbgeek17's post in the thread [TUTORIAL] Why LVM-Thin Cannot Be Shared Storage in Proxmox with Like.
Hi @alexskysilk , you know I love a good bash loop, but ACL toggling is vendor-specific. It often only gates new logins, so an established session keeps writing until the target decides to drop it, and whether it does that on revoke is up to the...
-
SteveITS replied to the thread [SOLVED] ACME to Namesilo DNS validation task fails immediately, setpriv exit code 1.Just to follow up on this, for posterity, Namesilo has increased their record limits: Free: 100, but “can be increased to 150–300 records upon request” Premium ($9/yr): 500 Creation works, however, record removal fails and this is logged... -
Memory consumption looks quite normal. Even my stripped down bare metal windows install uses 6+ GB of memory (with browser opened). And looking at your task manager screenshot you have installed quite a bunch of stuff ...
-
SteveITS replied to the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon.@wursti Is your PVE up to date on all nodes? "add --verbose for fullnode, keyring, and device inventories" I do not see where you ran the "rotate-admin-key" step?
-
BBu66as replied to the thread [SOLVED] CEPH KEY MIGRATION: pvestad nicht verfügar?.Ja, das geht, aber schau dir vorher mal ceph osd tree an. Es kommt drauf an, wie die Host-Buckets im CRUSH heißen. Wenn die bei 01-03 auch mit FQDN drinstehen, wandern die OSDs beim Start nach dem Hostname-Wechsel in einen neuen Bucket...
-
AAkUsP replied to the thread How granular is QEMU Guest Agent's ability to report on RAM usage inside a Guest VM?.Ok. That is also another question I have, but dident post here in Proxmox forum. What web monitor would you use that is open-source, forever free and very "basic". I was reading about LibreNMS to be the one to use? Maby you have another idea? I...
-
Wwaltar reacted to ThoSo's post in the thread Lizenzierung einer Software nach Migrierung zu Proxmox with Like.
Ich lehne mich mal aus dem Fenster. Die Community kann nicht prüfen, ob es sich bei der Anfrage um eine legal lizenzierte Software handelt, oder ob hier einfach nur Hilfe beim umgehen von Lizenzierungen auf "nette" Art angefragt wird. Der...
-
Wwaltar reacted to Bu66as's post in the thread Lizenzierung einer Software nach Migrierung zu Proxmox with Like.
Was viele Lizenz-Tools als "CPU UUID" abfragen, ist die SMBIOS-System-UUID (das was wmic csproduct get uuid ausgibt). Die kannst du in PVE einfach mitgeben. Bei ausgeschalteter VM: qm set <vmid> --smbios1...
-
Ggrefabu replied to the thread [SOLVED] CEPH KEY MIGRATION: pvestad nicht verfügar?.Kann ich das gerade ziehen, ohne das CEPH zu zerschiessen?