Latest activity
-
Pproxuser77 replied to the thread Proxmox VE 7 is vulnerable to some type of 0day/RCE non auth.Sorry, but I'd say using Proxmox VE as a kind of VPS or RDP service over the internet is, is kind of risky by itself. I mean, have they ever had an audit, and if so, do they recommend or even sell it for that use case, i.e., using it for...
-
Ddelltech1 replied to the thread [PROJECT] BASTRIX SharedLVM for Proxmox VE 9 — FC/iSCSI Storage with Thin Pools, Thick Generations and Multipath Safety.Project update — RC5.4 TG24 milestone A newer experimental release, RC5.4 TG24, is now available. It combines the established per-VM Thin mode with the optional Thick Generations mode and has reached an important qualification milestone. Thick...
-
Pproxuser77 replied to the thread DNS-Abfragen PVE->PBS.Ich habe einfach dnstop auf einem einzelnen PVE Host laufen lassen und dabei auch keine Stoppuhr benutzt. ;) Bei mir nutzen die PVEs den Unbound der pfSense und da habe ich kein log für die Queries aktiviert. Pi-hole nutze ich nur für die Client...
-
TTErxleben replied to the thread DNS-Abfragen PVE->PBS.Mein DNS verzeichnet sogar ca. 5 Abfragen eines PVE pro Sekunde.
-
TTErxleben replied to the thread DNS-Abfragen PVE->PBS.resolv entält meinen DNS-Server (pihole), der Anfragen pingelig protokolliert. Vielleicht sollte ich in den storages den DNS-Namen mal gegen eine IP ersetzen. Elegant ist aber anders. Siehe meinen Nachtrag im Eingangsthread.
-
Pproxuser77 replied to the thread DNS-Abfragen PVE->PBS.Der scheint so jede Sekunde eine Abfrage zu machen. Habs jetzt nicht genau gemessen, aber wenn du so ca. eine Minute lang dnstop laufen lässt, sieht es bereits so aus: ;)
-
-
SteveITS replied to the thread [SOLVED] A fix for "QEMU Guest Agent is Not Running" on HA VE?.Is this a VM or container? Is the service actually running in it? The checkbox just tells PVE to look for it. -
BBu66as replied to the thread DNS-Abfragen PVE->PBS.Der glibc-Resolver cached halt nix. pvestatd pollt den PBS-Storage alle 10s, und bei jedem Connect gibts ne frische Auflösung, A und AAAA getrennt. Macht pro Node schon grob 17k am Tag, mit zwei Nodes plus Backup-Jobs und Verify bist du schnell...
-
SSpiceGuy replied to the thread [SOLVED] How do I list the directories/file on my local drive?.I think everything looks normal after kernels were removed. Thanks Impact for helping me through this. I learned a lot more than I could do on my own.
-
TNicht das es den Betrieb stören würde, aber ich finde es schon ein wenig happig, wenn zwei PVEs täglich 70.000 DNS-Abfragen für den jeweils dort eingebundenen PBS kreieren. Da läuft doch was falsch... P.S: Der Treppenwitz ist, dass sowohl PVE...
-
Hhouser replied to the thread [SOLVED] A fix for "QEMU Guest Agent is Not Running" on HA VE?.Thanks very much for your reply. This is the output to that command for the VE in question: root@pve2:~# qm config 104 --current qm status 104 df -h pvesm status agent: 1,type=virtio bios: ovmf boot: order=scsi0 cores: 2 description: <div...
-
itNGO posted the thread [SOLVED] PVE 9: SCTP Corosync fails after restart with libknet1t64 1.35-pve1 (EINVAL / status 8) in Proxmox VE: Networking and Firewall.After a Corosync service restart, one node failed to rejoin our cluster. The installed libknet has no usable SCTP transport, despite SCTP being configured. The diagnosis is confirmed; production recovery after a rollback has not been verified... -
Kkawano-y replied to the thread [SOLVED] A fix for "QEMU Guest Agent is Not Running" on HA VE?.If you have shell access to the Proxmox host, could you post the output of the following commands? This may not identify the exact root cause, but it should help rule out obvious Proxmox-side issues such as VM configuration, boot order, network...
-
Phttps://forum.proxmox.com/threads/proxmox-ve-web-gui-is-a-blank-page.172804/page-2#post-806736 Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
PHi togehter, had the same issue and this solved this. Thank you!
-
news replied to the thread PMG boot failure: can't find zpool "rpool".May be @SomeNewUser you show us your real hardware and the Disks? SSD no QLC and HDD no SLC Drives. ZFS run on my servers as ZFS Raid 1 - Mirror with on minimum 2 disks. Example I setup a ZFS Mirror SSDs disk for only the rpool and the proxmox ve... -
OOnslow replied to the thread PMG boot failure: can't find zpool "rpool".Welcome, @SomeNewUser Don't use apt upgrade . Use apt full-upgrade :)
-
G_gabriel replied to the thread [SOLVED] How do I list the directories/file on my local drive?.Please don't answer with another question, it's endless.
-
Ffruchtzwerg reacted to aureladmin's post in the thread [TUTORIAL] HiveStation - Developer Workstation for Proxmox Virtual Environment with
Like.
Short answer: that's completely normal, and nothing to worry about. Swap being used while you still have free RAM isn't a sign of memory pressure. The kernel proactively moves cold (rarely-touched) anonymous pages out to swap so it can keep more... -
MMN7675 replied to the thread (SOLVED) CEHPX Disabled, CEPH Key Migration - Removing an auth entry?.I found this section of the ceph documentation, but I'm not sure these are the right commands to run for this problem: Link to Documentation.
