Latest activity
-
Eexterrestris replied to the thread Kernel oops when passing through Adaptec ASR-72405 (aacraid) to VM on kernel 7.0+.Under kernel 7.0, with VM allocated 10 GB and running: root@starbase-375:~# free -h total used free shared buff/cache available Mem: 15Gi 12Gi 3.3Gi 66Mi 358Mi 3.4Gi...
-
Eexterrestris replied to the thread Kernel oops when passing through Adaptec ASR-72405 (aacraid) to VM on kernel 7.0+.The ZFS pool on the host is a pair of mirrored 480 GB SSDs. Immediately after boot under 6.17 with VM stopped: root@starbase-375:~# free -h total used free shared buff/cache available Mem: 15Gi...
-
AHallo Forum! Auf einem Pve 9 der die ganze Zeit unauffällig lief wurde eine VM (debian) plötzlich langsam und ließ sich nur durch sigkill beenden. Dann startete Sie nicht mehr - time out waiting for systemd - erst nach einem reboot des Hosts...
-
Ooelk replied to the thread VirtIO-Installation 0.1.271 auf Windows Server 2019 schlägt fehl/geht nicht.Ich hab am Wochenende noch ein paar andere Installation mit anderen Optionen gemacht, da gings dann plötzlich. Und ja, ich hatte das ISO nochmal heruntergeladen. Ich kann Euch natürlich auch die kompletten virtio-install.log anhängen, das dürfte...
-
Ppirulax replied to the thread Any way to isolate VMs on same VLANs/bridge?.Any good way to do this? I assume SDN might do the trick.
-
Jjwsl224 replied to the thread vm restore slower than absolute 0.hey Chris, thankfully, the problem seems to have solved itself. restores are now going at 10gbps as they used to. i'm not sure what the deal here was, there doesn't seem to have been any kind of background scrub going on anywhere, nor any...
-
Sshodan posted the thread Setting vCPU over physical maximum, should not be fatal to start, just start with physical core count and pop a warning ! in Proxmox VE: Installation and configuration.Hi, The page where you select how many core Does not say the physical core count of the node And if you put it over, VM won't start Missing one vCPU should not be a fatal error, it should just start with the max number and just display a...
-
-
Stoiko Ivanov replied to the thread pve-no-subscription CDN edge (de2) returns wrong TLS certificate / 401 for download.proxmox.com.Thanks for the further tests - the only logline on 212.224.123.70 matching 188.152.219 is the curl you did at 12:19 (CEST) my current guess would be some kind of firewall/mitm box (I remember some of those which had an issue with APT's user... -
aaron replied to the thread Memory ballooning doesn't reduce host RAM usage?.I took a look at the code again, and AFAIU (which might be wrong), pvestatd initiates the Balloon changes here: https://git.proxmox.com/?p=pve-manager.git;a=blob;f=PVE/Service/pvestatd.pm;h=34f9da71fd05ee3c9c5cd1e09d25fe9832eb3364;hb=HEAD#l296... -
Llcerabolini replied to the thread pve-no-subscription CDN edge (de2) returns wrong TLS certificate / 401 for download.proxmox.com.Here's the requested info: a) Public IP (partial): 188.152.219.x/24 b) Traceroute to 45.84.67.184: traceroute to 45.84.67.184 (45.84.67.184), 30 hops max, 60 byte packets 1 10.0.0.2 0.229 ms 2 188.152.219.217 1.823 ms 3...
-
Stoiko Ivanov reacted to fabian's post in the thread pve-no-subscription CDN edge (de2) returns wrong TLS certificate / 401 for download.proxmox.com with
Like.
in particular, if plain curl works but APT doesn't, check whether there is a proxy setup in APT's configuration.. -
THi I try to configure OSPF6 on proxmox to route a loopback address. Every time I try to do this in vtysh I get it to work. But I find nowhere to create a loopback or configure OSPF for IPv6 in SDN. And every time I try to apply the SDN config it...
-
Tthegoggel replied to the thread frr.conf and frr.conf.local are not merging completely.Hi Is there any update on this issue?
-
PPhyrene reacted to UdoB's post in the thread A missing ISO file should not prevent a VM from starting, it should just be a warning with Like.
Yeah, that's annoying. You may create a bug report over at https://bugzilla.proxmox.com/ if there is none yet; look at: https://bugzilla.proxmox.com/show_bug.cgi?id=3869 https://bugzilla.proxmox.com/show_bug.cgi?id=4225
-
Falk R. replied to the thread VirtIO-Installation 0.1.271 auf Windows Server 2019 schlägt fehl/geht nicht.Das ISO noch mal neu runter geladen? Ich habe schon auf Hunderten Server2019 die 271er Version am laufen. Gibts nix, das liegt an NoVNC und dem Browser wie er das HTML5 interpretiert. Chromebasierte Browser (auch Edge) liefern da deutlich... -
ITo clarify, I mean a special device on SSD seems critical for the OP's stated HDD configuration using parity and the desire for performance.
-
PIs there anything new on this mater, or on the roadMap ? I mean, with a dedicated corosync network and Pings in the ~0.2ms range -->0.0002sec ! There Must be a way to "declare" a node missing in action faster that 60secs ? Thanks !
-
Uunderdpt reacted to complexplaster27's post in the thread Redhat VirtIO developers would like to coordinate with Proxmox devs re: "[vioscsi] Reset to device ... system unresponsive" with Like.
Hello I've have installed this new driver on our Test servers and have done the following in terms of multi-day testing: Boot-volume operation on vioscsi 0.1.302 Multiple reboots and device checks Five active VirtIO SCSI controllers Overnight...
-
You could only grant them access to manually execute shutdowns via the UI with VM.PowerMgmt perms on a pool or on individual guests. For the scheduling you'd need to go outside PVE. Either drive the API directly with a token scoped to that same... -
news reacted to fba's post in the thread Which file system for 100 + 140 TB Veeam servers and repositories? with Like.
You mentioned RAID devices so ZFS is not an option, it needs direct disk access instead.
