Latest activity
-
Ccomplexplaster27 replied to the thread Is it safe to update to Proxmox 9.Shouldn't matter, it's all software updates it'll just install it to wherever sda is. I wouldn't use USB boot if it's a production server if you have a dedicated drive to boot the server with. For a reference, this is my Gen9 server the boot...
-
-
Ssagiziv3 replied to the thread Is it safe to update to Proxmox 9.Currently my boot SSD in in the drives bay, does it affect it? I saw online some users recommend use a USB boot grub to support EFI
-
Ccomplexplaster27 replied to the thread Kernel 7.0.14-14-pve: immediate reset + CPU machine check when igb loads on I350 (Dell XC730xd) — 6.14 unaffected.Does it boot if you install a plain vanilla Debian 13 on it? Does it even boot into the USB installer or does it do the same thing? I feel if you can't get to those points it's no longer a software problem. For reference I'm running similar...
-
Ccomplexplaster27 replied to the thread Is it safe to update to Proxmox 9.I have a fleet of Gen9, Gen10, Gen11 and Gen12 servers all running Proxmox v9 no issues all on EFI boot. Just use the pve8to9 tool and see what it says.
-
IIsThisThingOn replied to the thread PBS with slow backend.Depends. Rsync should be pretty good at batching metadata over slow networks. AFAIK the bottlneck should be the storage metadata performance. PBS on the other hand reads ALL you lokal data, and creates a hash. So you lokal storage and CPU...
-
Aal064737 reacted to Stubennerd's post in the thread Error de instalación Proxmox - /lib/ modules/7.0.2-6-pve - No encuentra módulos del kernel with
Like.
This section of the forum is English only. The only other supported language is german, which has a separate section in the forum. So, please write your questions and answers in English. If you need a translator, I recommend DeepL. PVE will be... -
SteveITS replied to the thread 8.4 to 9.2 without upgrading.You can just upgrade without removing it…? Are you following the upgrade guide? -
SteveITS replied to the thread PBS with slow backend.The limit would sync 1 backup so can be used to get one of each VM offsite quicker…vs 25 backups of VM1.
-
Aal064737 posted the thread Error de instalación Proxmox - /lib/ modules/7.0.2-6-pve - No encuentra módulos del kernel in Proxmox VE: Installation and configuration.Hello everyone, I'm trying to install Proxmox VE 8.4 and I'm running into an error during installation that won't let me proceed. Right after launching the installer from USB, I get this message: *Error loading kernel modules from...
-
Iiwannabfishn posted the thread 8.4 to 9.2 without upgrading in Proxmox VE: Installation and configuration.I have a 4 node cluster of 8.4. I am upgrading by clearing all the VMs off of a host. Then I shut that node down. I run the command on another node to remove the node from the cluster (pvecm delnode nodename). Then I clean up by running the...
-
Mmystica555 posted the thread PVEBack - Scripts for a full bare-metal backup/restore of a Proxmox server [not VMs] in Proxmox VE: Installation and configuration.I've been working on implementing services on a currently single hypervisor for my friend and one thing that was required in the design plan was a proper backup/recovery method for the hypervisor itself. [Offsite backups of VMs are already setup...
-
SSeverenth posted the thread Kernel 7.0.14-14-pve: immediate reset + CPU machine check when igb loads on I350 (Dell XC730xd) — 6.14 unaffected in Proxmox VE: Installation and configuration.Posting this because I have a fairly clean reproducer and I can't find an existing thread for it. (please also forgive that I've been using Claude to troubleshoot this and summarise the post here) Summary: on a Dell XC730xd-24 (the Nutanix XC...
-
JJ-Rod replied to the thread PBS with slow backend.Reducing the number of recent backups to sync will help, but also not as much as you would hope. As I understand it, even if you only sync the very last backup, that backup is small at the source only because it's storing changes from the backup...
-
Ssagiziv3 posted the thread Is it safe to update to Proxmox 9 in Proxmox VE: Installation and configuration.Hi Proxmox Community I have a NAS machine that I recently installed Proxmox on, and had to install version 8 due to boot issues (some message about efi boot files). The machine is an HPE microserver gen 8, and from some digging online I found...
-
RRobertyu replied to the thread Intel 10Gb X540 Card recognized but bridge adapter does not pull ip address.Thanks for all of your help Impact! I went ahead and made both of my nodes static. The node in question is working well now. I went ahead and disabled the onboard NIC in the bios, rebooted, ran ip a, then edited my /etc/network/Interfaces...
-
Get a ZFS datapool with your needed ZFS datasets, then you can use ZFS Snapshots very fast and easy. -
I know this doesn't answer the question directly, but to overcome this I have setup a local PBS to which I backup my machines locally. From this local PBS I sync to a remote PBS instance. This offsite PBS is behind a slow connection (VPN over...
-
DDultas replied to the thread PVE 8 to 9 In-place Upgrade.So I probably have a somewhat unique setup. I use Cover bootloader to boot into my ZFS mirror boot partition. This is because my box can't boot NVMe otherwise. I know for a fact my system was using systemd-boot in 8, I believe it was the only...
-
Hhello_world6767 posted the thread VM Networking Performance with Mellanox Connect X-3 in Proxmox VE: Networking and Firewall.Hello, I am relatively new to Proxmox and virtualization in general and wanted some advice regarding networking performance with the card mentioned in the title, they are Oracle-branded Mellanox Connect X-3 cards cross flashed to Mellanox...
-
JJohannes S reacted to LnxBil's post in the thread [SOLVED] Shared LVM on Dell ME5024 — best practice for snapshot capability alongside HA? with Like.
In the past, we did the same, but with thick-LVM of all storage space and use the ZFS-over-iSCSI appliance for all stuff, that needs a snapshot. We migrated the VM online to the other storage, did the intended stuff and migrate it back. IIRC...
