Hi @kawano-y ,
I think OP may have moved on as this thread is from July 2025. But it is always nice to know what the resolution was!
Cheers
Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
Admiteddly, I have not installed/used this service. That said, can you export VM configuration in huma-readable format from Nutanix? It may be useful to compare that to the PVE VM config. So if you can include both - perhaps someone can spot...
Hi there, did you try this:
https://forum.proxmox.com/threads/pbs-4-upgrade-on-a-dell-nx3230-doesnt-fully-boot.183192/post-851045
That Solution is not only for pbs but also for the pve...
Das habe ich bei dem e1000-Problem noch nie erlebt. Deutet tatsächlich auf ein HWProblem.
Da bin ich dann ganz bei @news. Zusätzlich ein Wärmeproblem in Betracht ziehen. Also Lüfter kontrollieren.
As a VM it starts windows and that works.
But, It recognizes it as Virtual and causes the DSLicSrv server service to not start, thus making it a useless license server.
Now it should only require the MAC Address to be correct, which it is. It...
This should be the same for VMs and CTs as the HA Manager handles affinity rules the same for both. In a quick test, the migration blocker with the same node affinity rule as above was shown to me for both VMs and CTs, so I couldn't move either...
It should not let you migrate neither the CT nor the VM. If it did, once you migrate a VM from pve-4 to pve-2, in the next ha cycle (~10 seconds) HA would say "this VM on pve-2 has another node with higher priority and the node is up, let's...
It should not let you migrate neither the CT nor the VM. If it did, once you migrate a VM from pve-4 to pve-2, in the next ha cycle (~10 seconds) HA would say "this VM on pve-2 has another node with higher priority and the node is up, let's...
Hast du schon versucht C-States und andere Stromsparfunktionen im BIOS zu deaktivieren?
https://forum.proxmox.com/threads/proxmox-freezes-when-cpu-under-low-load-condtions.160313/post-740562
Hi @dakralex
is this a known bug? If not I would create a new one. (not related to dynamic crs but we had talked about other ha improvements here in the last posts)
Bug: VMs cant be migrated to nodes with lower priority if priority is set in a...
I have tried all combinations of host cpu hidden=2 etc. Nothing has worked.
I am using the same MAC Address from when it was an actual physical machine. Moving it to Nutanix was simple, just assign the MAC and it worked.
Any help would be...
Thanks for the responses. The backups do complete and verify. I will check the logs to see if anything shows up, but since it is happening on multiple hosts, PBS servers, VMs, not all the time, and not consistently in any way, I am not sure what...
Das habe ich bei dem e1000-Problem noch nie erlebt. Deutet tatsächlich auf ein HWProblem.
Da bin ich dann ganz bei @news. Zusätzlich ein Wärmeproblem in Betracht ziehen. Also Lüfter kontrollieren.
The guest-fsfreeze-status command is used to determine if a fsfreeze is still ongoing inside the guest VM. The timeout here show that the guest does not respond to the status requests send by the PVE host, which waits 10 minutes at most for this...
Just my 2 cents, I might be wrong:
My understanding this means pve (i think specifically pvestatd/qmeventd) tries to access the QMP socket of the VM but it couldn't and timeout, this can occurs for many reasons, for example such as another...
I ran into the same warning after upgrading from PVE 8 to PVE 9 with Ceph Squid.
It looks like /etc/init.d/ceph is simply an obsolete conffile left behind by ceph-base:
# dpkg -S /etc/init.d/ceph
ceph-base: /etc/init.d/ceph
# dpkg-query -W...
Guten Mittag, ich werfe noch mal in den Raum bios-batterie, BIOS Update, korruptes Flash für das BIOS und da würde ich mal anfangen, so wie halt Netzteil und Netzteil tauschen.