Latest activity
-
Daniel-Doggy posted the thread [SOLVED] ZFS packages updated by Debian repository. Is this expected? in Proxmox VE: Installation and configuration.Hello everyone, I just updated my pve node and got the following changelog after running apt-get dist-upgrade: This did not cause me any real concern as it outlines a couple of possibly breaking changes. (So I am assuming this is... -
-
BHi - Running PVE 9.2.10 I've created a WS 2025 VM and then converted it to a template. As well the system disk, it has an EFI and TPM disks, both 4M When I try to create a full clone from the template, it fails at the start when creating the...
-
Kkegloadam posted the thread [SOLVED] virtiofs and running out of file handles in Proxmox VE: Installation and configuration.Ran into an edge-case with a PBS virtual machine that had the chunks stored the host, backed by virtiofs. Garbage collection would consistently fail with "ENFILE: File table overflow" Finding the limit wasn't the easiest since it isn't enforced...
-
Ssistemastds replied to the thread VM becomes unresponsive during Veeam backup.Thank you very much for the response, I thought it was related to the anomalous behavior of ProxMox, I've noted it, I also have an open ticket with Veeam about the issue.
-
JJohannes S replied to the thread Proxmox with arr stack in LXC.Why is moving docker to vms not an option? Running docker inside lxcs isn't supported for a reason after all
-
JJohannes S reacted to JohnnieKF's post in the thread May I ask if PVE supports the following operating systems with
Like.
PVE doesn't have a 'supported' list, I am assuming this is a list of VMs you're wanting to export from an existing system like vSphere? You can run essentially any x86-64 OS, so all of those are fine. The OS Type field in PVE isn't a... -
JSending notifications for exceeding storage limits is not possible with the current PBS feature set, using external monitoring is the best way to achieve this [0]. FWIW there is some development work in adding protections for datastores running...
-
JJohannes S reacted to h@rald's post in the thread Horrifically slow download speeds for download.proxmox.com? with Like.
A bit more on the proxmox-offline-mirror tool, it creates local repositories, with a snapshoted subdirectories. These snapshots are folders that are named after the exact moment the sync was done, so each time you use the tool a new folder is...
-
JJohannes S reacted to h@rald's post in the thread Horrifically slow download speeds for download.proxmox.com? with Like.
Had a similar experience when trying to download updates for our cluster in China. I ended up singeling out the IP address for the Proxmox CDN in Singapore and added that IP address to the /etc/hosts file. (each host) I basically pinned the...
-
JJohannes S reacted to alexskysilk's post in the thread Quick HOWTO on setting up iSCSI Multipath with Like.
iSCSI isnt deprecated or dead, which is to say the driver stack is included with every modern operating system. having said that, iscsi makes little sense in a world where nvof exists.
-
BVielen Dank, klingt sehr sauber. Danke auch an den "noout"-Hinweis, daran hätte ich nicht gedacht.
-
cheiss replied to the thread pve-network-interface-pinning.Hi, tl;dr: Yes, running pve-network-interface-pinning generate and then rebooting is sufficient. Our documentation provides some more details: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_using_the_pve_network_interface_pinning_tool -
Ccarles89 reacted to t.lamprecht's post in the thread Ceph CVEs – keyring rotation strongly advised, probably required in the future with Like.
This can be done gradually, but needs a bit of care. We're currently in the process of finishing a migration helper tool and providing documentation for how to do this.
-
shanreich replied to the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host.Our current working theory is that the issue is caused by a newer firmware in conjunction with a newer kernel. Generally downgrading the firmware to an older version has been reported to work, although it's always hard with issues like these that... -
Rramba.zamba replied to the thread PVE-Cluster auf LACP umstellen.Vielen Dank, klingt sehr sauber. Danke auch an den "noout"-Hinweis, daran hätte ich nicht gedacht.
-
RDein Plan passt, aber die Bridge musst du nicht wegwerfen. cluster und cluster.4001 bleiben genau wie sie sind, du legst nur ein Bond an und tauschst bridge-ports enp1s0f1np1 gegen bond0. Also bond-slaves enp1s0f0np0 enp1s0f1np1, bond-mode...
-
SSupaman replied to the thread Not booting to Proxmox Installer.pro tip: use ventoy to make a boot stick, it create a multi boot usb stick. usage: 1) install ventoy to usb stick 2) copy any ISOs to the stick, and boot the iso of your choice.
-
VictorSTS reacted to t.lamprecht's post in the thread Ceph CVEs – keyring rotation strongly advised, probably required in the future with Like.
This can be done gradually, but needs a bit of care. We're currently in the process of finishing a migration helper tool and providing documentation for how to do this. -
VictorSTS replied to the thread PVE 9.2 + Ceph Tentacle 20.2.4: RBD operations fail because pve-storage passes removed --auth_supported option.@yangsm AFAIK, Ceph 20.2.4 / 19.2.6 packages are only available in Test repository, you should avoid using it unless for testing. Proxmox is working on the process to rotate the keys [1], although we still don't know the details, on paper it...
-
BBu66as replied to the thread PVE-Cluster auf LACP umstellen.Dein Plan passt, aber die Bridge musst du nicht wegwerfen. cluster und cluster.4001 bleiben genau wie sie sind, du legst nur ein Bond an und tauschst bridge-ports enp1s0f1np1 gegen bond0. Also bond-slaves enp1s0f0np0 enp1s0f1np1, bond-mode...
