Latest activity
-
Ccarles89 reacted to t.lamprecht's post in the thread Ceph CVEs – keyring rotation strongly advised, probably required in the future with
Like.
This can be done gradually, but needs a bit of care. We're currently in the process of finishing a migration helper tool and providing documentation for how to do this. -
shanreich replied to the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host.Our current working theory is that the issue is caused by a newer firmware in conjunction with a newer kernel. Generally downgrading the firmware to an older version has been reported to work, although it's always hard with issues like these that... -
Rramba.zamba replied to the thread PVE-Cluster auf LACP umstellen.Vielen Dank, klingt sehr sauber. Danke auch an den "noout"-Hinweis, daran hätte ich nicht gedacht.
-
RDein Plan passt, aber die Bridge musst du nicht wegwerfen. cluster und cluster.4001 bleiben genau wie sie sind, du legst nur ein Bond an und tauschst bridge-ports enp1s0f1np1 gegen bond0. Also bond-slaves enp1s0f0np0 enp1s0f1np1, bond-mode...
-
SSupaman replied to the thread Not booting to Proxmox Installer.pro tip: use ventoy to make a boot stick, it create a multi boot usb stick. usage: 1) install ventoy to usb stick 2) copy any ISOs to the stick, and boot the iso of your choice.
-
VictorSTS reacted to t.lamprecht's post in the thread Ceph CVEs – keyring rotation strongly advised, probably required in the future with Like.
This can be done gradually, but needs a bit of care. We're currently in the process of finishing a migration helper tool and providing documentation for how to do this. -
VictorSTS replied to the thread PVE 9.2 + Ceph Tentacle 20.2.4: RBD operations fail because pve-storage passes removed --auth_supported option.@yangsm AFAIK, Ceph 20.2.4 / 19.2.6 packages are only available in Test repository, you should avoid using it unless for testing. Proxmox is working on the process to rotate the keys [1], although we still don't know the details, on paper it...
-
BBu66as replied to the thread PVE-Cluster auf LACP umstellen.Dein Plan passt, aber die Bridge musst du nicht wegwerfen. cluster und cluster.4001 bleiben genau wie sie sind, du legst nur ein Bond an und tauschst bridge-ports enp1s0f1np1 gegen bond0. Also bond-slaves enp1s0f0np0 enp1s0f1np1, bond-mode...
-
Llonger replied to the thread Multiple VMs randomly give a warning during backup.Just my 2 cents, I might be wrong: My understanding this means pve (i think specifically pvestatd/qmeventd) tries to access the QMP socket of the VM but it couldn't and timeout, this can occurs for many reasons, for example such as another...
-
VictorSTS replied to the thread PBS on RAIDZ2+HDD, no special file.I'm not aware of a bug that won't allow install, mind posting a link to some reference?
-
RHallo. Mein Cluster hat aktuell 4 Knoten (irgendwann 5). Jede Maschine hat eine Dual 25G NIC und hängt an einem Mikrotik Switch. Über dessen VLAN 4001 läuft bspw. der PVE Cluster-Traffic. Die interfaces dazu sieht wie folgt aus: auto cluster...
-
Hh@rald replied to the thread Horrifically slow download speeds for download.proxmox.com?.A bit more on the proxmox-offline-mirror tool, it creates local repositories, with a snapshoted subdirectories. These snapshots are folders that are named after the exact moment the sync was done, so each time you use the tool a new folder is...
-
JJimbambuli replied to the thread SR-IOV with Intel X552/82599 vs X710 - Communication issue between VF VM and host bridge.I had exactly this on my own two nodes, and it cost me a weekend before I understood it. So here is the mechanism, and a two-minute test that will tell you where you stand. The card's internal switch (a VEB) forwards between the PF, the VFs and...
-
Ccyruspy replied to the thread PBS on RAIDZ2+HDD, no special file.I had SSD for OS, tried to go the ZFS on bare disks. Failed miserably due to a kernel bug in 7.0. Move to HDD only, 3+3 RAID10 instead of RAIDZ2 (4+2). Went back to hardware RAID1 for boot.
-
Wwoma replied to the thread [SOLVED] Feature Request: Scheduled tasks.There is another old thread about that topic as well as bugzilla entry. https://forum.proxmox.com/threads/feature-request-proxmox-ve-scheduled-tasks.152468/ https://bugzilla.proxmox.com/show_bug.cgi?id=7539
-
Llonger reacted to devleti's post in the thread [SOLVED] Changing an Existing Subscription Key to Another Subscription Key with Like.
Thank you for replying!
-
CCarstenGrohmann replied to the thread I/O Write Errors in VM running on NetApp NFS with sparsefile support enabled (DEALLOCATE returns NFS4ERR_IO).Based on the information you provided (v4.2-sparsefile-ops==disabled), you are not affected by this issue. :) Good luck with the XFS issue!
-
Kkawano-y replied to the thread Shared NFS storage showing status: unknown on 2nd pve host..I agree with the suggestions above. Could you please run the following command on the second Proxmox host and share the output? pvesm status It would also be useful to test whether the same NFS export can be mounted manually from that host...
-
Ssacarias replied to the thread Reporting enhancements in the bug tracker.No rude responses please
-
JJ-Rod replied to the thread Is any of Intel gen 11-14 with iGPU's SR-IOV (i915-sriov-dkms or Xe driver) any good for passing laptop screen between VMs and host?.Poison seems a bit harsh. Also, have you looked at what is required to properly secure PVE? It seems to have a lot of shortcomings out of the box. Have you already considered Qubes OS?