Latest activity
-
Ddevleti replied to the thread [SOLVED] Changing an Existing Subscription Key to Another Subscription Key.Thank you for replying!
-
Ppxmick replied to the thread Networking Issue.It is connected on nic3
-
JohnnieKF replied to the thread [SOLVED] Feature Request: Scheduled tasks.You could only grant them access to manually execute shutdowns via the UI with VM.PowerMgmt perms on a pool or on individual guests. For the scheduling you'd need to go outside PVE. Either drive the API directly with a token scoped to that same... -
JohnnieKF replied to the thread Networking Issue.Which port is your printer plugged into? Only nic0 has an IP and gateway
-
JohnnieKF replied to the thread MTU Not being correctly set between host and LXC.This may be helpful: https://forum.proxmox.com/threads/debian-13-lxc-mtu-always-set-to-1500.174060/
-
Mmonkfish reacted to proxuser77's post in the thread [SOLVED] Does this update require a reboot? with
Like.
You could try needrestart: needrestart man page By default, it runs in interactive mode, i.e. if you update from the CLI (apt update && apt full-upgrade), it tells you whether a reboot is necessary, lists all services that need to be restarted... -
Mmonkfish replied to the thread Reporting enhancements in the bug tracker.Wheres the thumbs down on this forum for, umm, some posts. Askin' like. Just askin'. Exactly What is prohibiting an installation of Proxmox from either source ISO or Debian and overlay on top? Perhaps the superb devs at Proxmox have better...
-
Mmonkfish reacted to fabian's post in the thread Reporting enhancements in the bug tracker with Like.
we've already prioritized internally going through the backlog of the installer issues filed in bugzilla for the next series of releases, so they should all get an update one way or another once that has happened! please be patient (we are aware...
-
Aalexskysilk replied to the thread Quick HOWTO on setting up iSCSI Multipath.iSCSI isnt deprecated or dead, which is to say the driver stack is included with every modern operating system. having said that, iscsi makes little sense in a world where nvof exists.
-
WHi guys! As some of you might know we are organizing the Dutch Proxmox Day again. Last year we decided to reach beyond our borders and have all presentations in English. Which was a great success since almost half of the audience consisted of...
-
Ccapm posted the thread [SOLVED] NetBox IPAM does not request IP in Proxmox VE: Networking and Firewall.Core Issue: After setting up NetBox IPAM, creating a Container or adding an Interface to an existing one, does not make an API call to NetBox. PVE 9.1.1 Tested against NetBox v4.5.2 and v4.6.2 Steps taken.... Added IPAM Name, token, url. When...
-
TTmanok posted the thread MTU Not being correctly set between host and LXC in Proxmox VE: Networking and Firewall.Hi Everyone, I think I may have come across a bug? When configuring MTU on PVE, whether the GUI or CLI is synonymous, I checked both and MTU was setup to 1450, it doesn't actually apply to an LXC in the latest PVE- actually I am moments from...
-
TTmanok replied to the thread Horrifically slow download speeds for download.proxmox.com?.Thanks, H@rald, that's good advice. And thanks, Thomas, I haven't been back on that site to check but I will shortly.
-
JJ-Rod replied to the thread Is any of Intel gen 11-14 with iGPU's SR-IOV (i915-sriov-dkms or Xe driver) any good for passing laptop screen between VMs and host?.Is there a reason you couldn't run a lightweight Linux desktop, then run the VMs full screen when needed?
-
JWell, in the end it turned out that adding hw.virtio.pci.transitional to /boot/loader.conf.local did the trick and unlocks the modern virtio, even if Proxmox uses the PCI bus and not PCIe. Multiqueue is also working fine then, als long as you...
-
Mmattgia49 replied to the thread Not booting to Proxmox Installer.Im dumb. i was using the wrong iso
-
Mmattgia49 replied to the thread Not booting to Proxmox Installer.I have also tried making a debian 13 bootable drive and that is able to work
-
PHi Everyone, Recently I upgraded from PVE 8+ to 9.2.11. It has 4 NIC on the machine. It was working fine until the upgrade. The led light on the NIC is blinking, it was connected with a network printer. Now I can't find that printer on my...
-
-
TTmanok replied to the thread Proxmox VE 9.2 – sporadic iSCSI NOP timeouts / DID_TRANSPORT_DISRUPTED with Dell PowerVault ME5 and Intel E810.Hmm well there goes my PAUSE frames storm hypothesis. There was no corresponding jump in link_xoff_rx.nic, no CRC errors, no drops, no E810 reset and no physical link loss. So I was wrong... But that narrowing TCP window is TCP-layer...
-
Ssacarias replied to the thread Reporting enhancements in the bug tracker.@t.lamprecht @fabian PVE 9.2 still doesn't have the proposed changes... With "next series of releases", did you mean 9.3, 9.4, 9.5, etc?
