Hi @MJ_UI
thanks for posting on the forum!
So if i understand correctly DHCP option 15 is set and applied correctly but your answer server uses a different domain and this would be supplied in the 119 option, correct?
Best regards
Jonas
This is how I have set my multipath.conf file, for each lun I associate it with the wwid, is there a better approach ?
root@SRV-LABPROXMOX01:~# cat /etc/multipath.conf
multipaths {
multipath {
wwid...
Danke fürs Aufschreiben, aber ich glaub die Ursache ist ne andere: die Variable heißt PAPERLESS_CONSUMER_POLLING (Wert in Sekunden), nicht PAPERLESS_CONSUMER_POLLING_INTERVAL. Mit dem falschen Namen wird die Option einfach ignoriert, watchdog...
Danke fürs Aufschreiben, aber ich glaub die Ursache ist ne andere: die Variable heißt PAPERLESS_CONSUMER_POLLING (Wert in Sekunden), nicht PAPERLESS_CONSUMER_POLLING_INTERVAL. Mit dem falschen Namen wird die Option einfach ignoriert, watchdog...
Ihr könnt euch jede weitere Antwort sparen. Der Account @MarroniJohny ist definitiv ein Testbot.
Ich habe gerade spaßige Momente auf dem direkten Nachrichtenkanal.
Ob man solche Testballons rausschmeißt oder nicht, ist nicht mein Beritt.
Zur...
Ich bin zu 100% bei dir.
Darum habe ich nur im PN-Bereich einen Thread bzgl. dieses öffentlichen Teils mit 65 Beiträgen zur Hand.
Darunter fast sofortige Reaktionen und willenlosen Antworten zu dümmsten Einzeilern wie "was ist 42" innerhalb im...
Ich will ja hoffen,das wir uns das thema hier nicht noch weitere 18 Monate antun müssen. Ich kann beim besten Willen hier überhaupt nicht erkennen, was das Ganze mit Proxmox zu tun hat. Technische Probleme gibt es bei der Nutzung jedenfalls...
er betreibt und den consume-Ordner über einen CIFS/SMB-Mount (z.B. Synology NAS) per Bind-Mount in den Container reicht, hat folgendes Problem: Neue Dateien im consume-Ordner werden vom document_consumer nicht automatisch erkannt – auch nicht mit...
Normally after I reboot my proxmox 8
1. systemd will start to boot and show list of messages and then finally show the text login screen
2. For some reason, today it keeps showing the list of messages, pauses and continues showing more messages...
Thanks :D I knew that ZFS is CoW but I never looked up how exactly a Ceph RBD works - good to know.
Although I think we have to be careful with thinking of them like bookmarks. At least ZFS has a separate bookmark function that doesn't keep the...
ceph and zfs are CoW native; snapshots are not "real" in the sense that the data isnt separated- think of snapshots as bookmarks.
VMDK isnt, and so snapshots are addon files. qcow2 can exhibit similar performance degradation.
In summary-...
I have 6 nodes with the following drives
4x HP PM9A3 480GB(M.2 NVMe PCIe 4.0) slow due to 480gb, not fast as the u.2 and larger drives, benchmarks hard to find on the m.2 480gb.
5x PM1655 800GB(SAS 24 Gbps)
3x PM897(SATA 6 Gbps)
This will be a...
Hi,
Good to hear that you were able to import the pool again.
The `UNAVAIL` entry was probably not created by the export/import operation.
`zpool import -d /dev/disk/by-id` scans the selected device paths for ZFS labels.
In your output, the...
Bumping for a question: I'm trying to setup a NFS share from my Ugreen nas to be used in Immich on the lxc unprivileged container.
With this guide, do I need to map all to admin or just adding the immich user to the new group inside the lxc is...
Running ZFS on a obfuscated device (eg, RAID LUN) isnt dangerous per se; its no safer then any other filesystem on raid- which is to say you have no checksum correction facility at the filesystem level so you're paying the zfs tax for no gain...