Adding a data point with two things I don't think are in the thread yet: non-ECC consumer RAM, and a phantom event on microcode 0x0a201213 — which argues against the newer microcode being protective.
System: Ryzen 9 5950X (stepping 2, cpuid...
The issue is still occurring after trying 1. and 2.
No errors logged on the host and no zfs issues found with scrub, just repeated corruption in the guest disks.
I had even used a new disk and installation after each issue to start with a clean...
I had this or rather a very similar issue on one of my LXC containers running debian 13 (trixie), too.
The apt-daily.service and apt-daily-upgrade.service units do not depend on the systemd-networkd-wait-online.servicem , but they call...
Hi,
you can try vxlan, with a reduced MTU size.
For vlans, as for QinQ your switch needs to support that protocols. Simple zones are only local. Vxlans wrap the traffic in simple UDP packages, and the inner address information is embedded in that...
Ich bin zu 100% bei dir.
Darum habe ich nur im PN-Bereich einen Thread bzgl. dieses öffentlichen Teils mit 65 Beiträgen zur Hand.
Darunter fast sofortige Reaktionen und willenlosen Antworten zu dümmsten Einzeilern wie "was ist 42" innerhalb im...
Gedankenaustausch können wir gerne hier weiter machen. Wüsste nicht, was dagegen spricht. Und ja, die Anwendung wird wahrscheinlich/vielleicht mal auf Proxmox gehen. So der Plan. Und ja, Testbetrieb ist tatsächlich auf 24 Monate geplant, aber...
OMG. Schon wieder so belangloses Geschwafel um womöglich Diskussionpotential zu erzeugen.
Das mit ganze mit belanglosen anonymen Links nur im Privatebereich garniert, die nicht überprüfbar sind.
Wie gesagt spreche ich auch nicht mit meiner WaMa.
It worked,
root@pcnpve1:~# ls
create-lxc-2340bf10.log create-lxc-449dbcbc.log
and I was able to transfer them to my laptop with Bitvise SSH Client. I just hope the people managing MyIP will be able to help.
Thanks very much.
Does anyone know how to prevent this from happening? I upgraded another box and the same thing happened. I have (3) more boxes to upgrade.
Should I be upgrading grub?
Is there a script to run against grub before the upgrade?
Can I manually edit...
Hätte es ja wissen müssen, dass Du es wieder ins ö ziehst. War auch der Grund, wieso ich das mit dir per pm regeln wollte. Damit Du himmelherrgottzack mal meinen Thread nicht weiter runter ziehst. Muss ich dir jetzt nochmal erklären, was mit...
OK, $(pwd) means current directory and not password. And all the quotes? Are they part of the command too? Never saw that before (for a beginner).
pct pull 101 "/tmp/create-lxc-2340bf10.log" "$(pwd)/create-lxc-2340bf10.log"
pct pull 101...
Hello, I am trying to setup a SDN network on my 3-node cluster. This is a flat network for my home lab with no vlans.
I tried using simple, vlan and QinQ zones but cannot seem to get my VM's to get any DHCP address from my router.
I tried using...
Kernel loading hangs on kbd1 at kbdmux0 (in my case it was on FreeBSD 9.3) and all cpus are at 100% load
Set the cpu emulation mode - core2duo
1. Add via proxmox gui for VM Serial Port (0)
2. Select it in Display
3. Turn off the VM
4. In the...
OK, so where, as you have it above, do these files get written exactly? I'm guessing pwd is my root password. Yes?
Would this be correct if I wanted to write to the var/pete101 directory?
pct pull 101 /tmp/create-lxc-2340bf10.log...
Ja, hast mir ja auch versprochen, dass Du dich zukünftig raus hältst. Gerne danke, ja! Er wusste btw. nicht mal, was mit "meinem Thread" gemeint ist. Und auch sonst hat er jede Menge Schwachsinn gepostet. Ich natürlich auch, ja. Fand das ganz...
Ihr könnt euch jede weitere Antwort sparen. Der Account @MarroniJohny ist definitiv ein Testbot.
Ich habe gerade spaßige Momente auf dem direkten Nachrichtenkanal.
Ob man solche Testballons rausschmeißt oder nicht, ist nicht mein Beritt.
Zur...