Latest activity
-
Falk R. replied to the thread alternative zu glusterfs.Die große Frage ist, was für Storage hängt denn da jetzt dran? Raid Controller, HDD/SSD, iSCSI oder was auch immer. Ceph geht eh nur wenn du die Disks nativ nutzen kannst. Bei ZFS hat man theoretisch mehr Möglichkeiten, aber bei 5 Hosts auch... -
Wweppa replied to the thread Increased latency on disks since 9.2.6 and associated 7.0.x kernel.I tried contacting the linux-kernel-block maintainer but I did the unthinkable ; I sent him a short and polite email instead of subscribing to a mailing list full of experts. I'l leave it to someone else to try to have these people care about the...
-
driley reacted to rahman's post in the thread Where to see which s3 endpoint used by a datastore in UI? with
Like.
Done, thanks. https://bugzilla.proxmox.com/show_bug.cgi?id=7933 -
Falk R. replied to the thread [SOLVED] VLANS für VMs und Host.Das klingt aber eher nach Firewall auf der VM. Wenn du das für Kubernetes VMs benutzt, OK, aber wenn die Hosts da VMs ablegen, würde ich für Storageverbindungen immer dedizierte Netzwerkkarten und Switches verwenden und das nicht unbedingt auf...
-
Bug filed: https://bugzilla.proxmox.com/show_bug.cgi?id=7932 -
Falk R. reacted to Bu66as's post in the thread Looking for someone to help me with PVE, Proxmox Mail Gateway, and Proxmox Backup with Like.
Hab dir per PN geantwortet, machen wir da weiter, dann spammen wir den deutschen Bereich nicht mit einem englischen Thread.
-
Bug filed: https://bugzilla.proxmox.com/show_bug.cgi?id=7932 -
Rrahman replied to the thread Where to see which s3 endpoint used by a datastore in UI?.Done, thanks. https://bugzilla.proxmox.com/show_bug.cgi?id=7933
-
Rrfox replied to the thread PDM 1.1.7 - where is uptime in GUI ?.Bug filed: https://bugzilla.proxmox.com/show_bug.cgi?id=7932
-
JohnnieKF replied to the thread Proxmox VE 9.2 installation hangs at 99% "make system bootable" on HPE ProLiant DL380 Gen12 – PVE 8.4 installs fine.Boot the ISO and pick 'Advanced Options' > 'Install Proxmox VE (Debug mode)'. You'll get a shell before the installer runs, then exit to proceed the installer. When it stalls at 99%, switch console with Ctrl+Alt+F3 and grab: cat /tmp/install.log -
Uuzumo replied to the thread NVIDIA vGPU passthrough - PCI AER and ReBAR not working properly.Linux v6.19 and QEMU 11.0 simply have the capability to check for the presence or absence of certain features; not all drivers or devices support those features. Therefore, I don't think the display is acting strangely. Has RHEL 8 reached the...
-
JohnnieKF replied to the thread iGPU passthrough with Intel UHD Graphis 600 on Intel Celeron J4115 stopped working with Kernel 7.0.Pin 6.17 for now so you're not stuck with a broken passthrough: proxmox-boot-tool kernel pin 6.17.13-21-pve Then post your VM config so we can see how the device is attached: qm config <VMID>
-
driley replied to the thread Where to see which s3 endpoint used by a datastore in UI?.Ah, I see what you mean. Currently, I don't know of any way you can figure this out without looking at the configuration files in a shell. It does seem like a sensible addition to the UI, so feel free to create a feature request on Bugzilla...
-
shanv replied to the thread PDM 1.1.7 - where is uptime in GUI ?.Ahh, sorry! We don't have that yet. Could you please create an enhancement request in Bugzilla?
-
Ggabbegubben replied to the thread avast for Linux now available for trixie.Wow, I actually contacted their customer service a month ago about support for Debian 13 (trixie) and got the following response: so this is a very nice surprise :)
-
Ggabbegubben reacted to paul477's post in the thread avast for Linux now available for trixie with Like.
Hi. I 've been missing avast for Linux for PMG 9 / debian trixie for quite some time but now I find it published on their repository server. Took them a long time but now it's arrived :) Hth
-
JJohannes S reacted to gfngfn256's post in the thread Install Proxmox on the Raspberry Pi 4 with Like.
Though clearly unsupported by PVE (as specified in the release), the lately-released official PVE for arm, seems to somewhat "accommodate" a pi-installation, as general web-searching seems to show. (Even a user or two on these forums seems to...
-
Rrfox replied to the thread PDM 1.1.7 - where is uptime in GUI ?.Thanks - that's actually not what I meant - I mean on the Summary page of each node, VMs and CTs there is the Uptime being shown - but nowhere to be found on PDM The PDM shows last refresh on Dashboard - but no indication of the Uptime of the...
-
-
shanv replied to the thread PDM 1.1.7 - where is uptime in GUI ?.Hi, for guests, the uptime is visible under the guests entry in the sidebar. Please check this section.
-
JAlso, das mag vielleicht meinem Alter geschuldet sein, aber mit diesem "neumodischen" Foren Marke "Dicourcse", oder Reddit und Discord kann ich nichts anfangen. Das ist alles extrem unübersichtlich. Und wir reden jetzt noch nicht einmal über...
