Latest activity
-
Ccarver.it replied to the thread SQL Server 2022 database corruption.Thanks, will yes that sounds almost certain then. I'll grab the version numbers. Id seen few other similar posts but not that one. How on earth such a driver is still in existence I don't know!
-
SSnuupy reacted to paradox55's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with
Like.
Works on the orange pi 5 plus with the edk2 UEFI firmware! -
Ppk0 replied to the thread [SOLVED] I installed a script proxmox VE and it broke my networking.1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6...
-
Uuzumo replied to the thread Should i install proxmox on my 4TB SSD RAID 5 setup ?.It might actually be better to have a DRAM cache than a DRAM-less solution that uses the host’s memory as an HMB. The main point of discussion above wasn’t that PLP is used to protect against data loss, but rather whether you actually need an...
-
bbgeek17 replied to the thread SQL Server 2022 database corruption.Here is a link that I've recently came across that may be useful: https://pve.proxmox.com/wiki/Windows_VirtIO_Drivers#0.1.285:_VirtIO_SCSI/VirtIO_Block:_Read_errors_and_performance_issues_with_IO-heavy_Windows_Server_2025_VMs Blockbridge ... -
bbgeek17 replied to the thread Problem with VirtIO in Windows Server 2012 r2 installation.This section of Wiki may be useful: https://pve.proxmox.com/wiki/Windows_VirtIO_Drivers#0.1.285:_VirtIO_SCSI/VirtIO_Block:_Read_errors_and_performance_issues_with_IO-heavy_Windows_Server_2025_VMs Blockbridge : Ultra low latency all-NVME shared...
-
Mmoda20 replied to the thread Should i install proxmox on my 4TB SSD RAID 5 setup ?.I am only looking at software RAID for now unless i can get something already ready OOB (drives and cards or a ready enclosure that i can slot in), but i ma not seeing how i can find that rn xD I see, 3 drives raid 5's 1 drive redundency is more...
-
Mmoda20 reacted to J-Rod's post in the thread Should i install proxmox on my 4TB SSD RAID 5 setup ? with Like.
For home lab, it's whatever you want, or need, I suppose. But with software RAID, for simpler troubleshooting and recovery from faults, I would lean towards a mirrored array for boot, rather than single parity, dual parity or even RAID10. So...
-
UdoB reacted to Johannes S's post in the thread Empfehlung / Erfahrung Proxmox auf Notebook with Like.
Kommt drauf an, was man unter "gehen" versteht. Die Anforderung kommt daher, dass corosync empfindlich auf Latenzen regiert. Ist die einzige Netzwerkleitung also mit Migrations-, Replikations- oder sonstigen Datenverkehr ausgelastet gerät... -
Ddahainsworth posted the thread can you prevent nic reset during iso/install start in Proxmox VE: Installation and configuration.i have some servers connected via shared idrac when ethernet ports in a rack are at a premium. i swear this used to work (but i may be making it up), normally via dell idrac i can mount whatever iso over the one connected ethernet port and boot...
-
TTErxleben replied to the thread Wasserdichtes System für kleine Multi Teant Anwendung.Das nenne ich Mut zur Lücke. Du willst ein Geschäftsmodell aufziehen und dein Wissen beziehst du aus schwindeligen KI-Statements und Nachfragen in einem Forum. Respekt! Soviel Chuzpe muss man erstmal mitbringen.
-
JJohannes S reacted to Supaman's post in the thread PBS with WORM/Immutable Storage for Backup Chunks with Like.
Not immutable, but you can: - protect each backup - do not run gc / prune Furthermore: you can create a user account fpr pve usage, which has the rights "backup". this user can only write (delvier), protect and restore backups, but not delete.
-
JJohannes S reacted to Chris's post in the thread Proxmox Backup Server 4 | S3 | Cold Storage | Glacier with Like.
No, PBS currently does not support different storage classes, see https://bugzilla.proxmox.com/show_bug.cgi?id=6688 Unfortunately these are rather provider specific.
-
Uuzumo replied to the thread NVIDIA vGPU passthrough - PCI AER and ReBAR not working properly.You should already know which module is currently in effect. If I had used QEMU 10, I probably wouldn't have encountered any errors, but since there were no errors, I'm sure I would have been satisfied even without the new features. Anyway, if...
-
WOne can also use "negative affinity" to prevent HA VMs from moving to certain nodes. Side note: if you add a Qdevice for a 5th vote, then the cluster can handle 2 nodes being off simultaneously. Currently it's just one because 2/4 is not over...
-
Gguruevi replied to the thread NVIDIA vGPU passthrough - PCI AER and ReBAR not working properly.The first error is benign, we've been getting these for years, it has to do with PCIe bus error recovery. The second error is also benign, you typically see it when your QEMU and kernel versions aren't matched. Are you using the enterprise repo...
-
AAlexanderB replied to the thread failed to query local AF_VSOCK CID.Having the same issue on one VM. I don´t know if this will cause an issue in the future.
-
CPVE's wizard does not create a partition (table). I complained about this here: https://bugzilla.proxmox.com/show_bug.cgi?id=6915 By the way you don't need to initialize a disk for the wizards. The disk disk just needs to be empty.
-
cwt replied to the thread NVIDIA vGPU passthrough - PCI AER and ReBAR not working properly.If CONFIG_VFIO_PCI_DMABUF=y is enabled on the 7.0 kernel and QEMU 11 still reports the feature as unavailable, this probably isn’t about kernel version anymore. The interesting part may be the NVIDIA vGPU VFIO backend itself. This isn’t a...