Latest activity

What's new Featured content New posts New profile posts Latest activity
  • JohnnieKF
    JohnnieKF replied to the thread [SOLVED] Issue with booting kernels after 7.0.14-6.
    Seems this may be a reported bug with similar hardware: https://bugzilla.proxmox.com/show_bug.cgi?id=7872 Patch introduced on the test kernel 7.0.14-12-pve
  • O
    ow-vtech replied to the thread IO Pressure Stall - Unexplained.
    I was and am aware. Verified using this command and grep.
  • G
    gfngfn256 replied to the thread IO Pressure Stall - Unexplained.
    Be Aware: Simply issuing a reboot inside the VM, will NOT use the current pve-qemu-kvm, so you must shutdown & then start VM again, to actually use the current pve-qemu-kvm binary.
  • JohnnieKF
    JohnnieKF replied to the thread [SOLVED] Issue with booting kernels after 7.0.14-6.
    Might be worth trying to remove these first as a sanity check. If you removed quiet and still don't see an output plus your keyboard completely disconnects that would indicate the kernel dying immediately. You mentioned this was recently, has...
  • P
    proxuser77 replied to the thread Probleme bei installation von Openmediavault.
    Ich sehe ja grundsätzlich ein, dass IPv6 die Zukunft ist. Ich sehe für mich persönlich einfach (noch) keinen Grund, es zu implementieren, vor allem nicht im Heimnetz. Wie gesagt habe ich von meinem ISP nicht einmal IPv6. Was den Mailserver...
  • JohnnieKF
    JohnnieKF replied to the thread [SOLVED] Can't log in via GUI or connect via PDM.
    That looks like all your configs have been reset given the size of the files. Can you post the output of /var/lib/pve-cluster/ Failing that, since it's left the cluster you could restore your backup, I'm not familiar with that tool so you would...
  • B
    Bu66as replied to the thread Empfehlung / Erfahrung Proxmox auf Notebook.
    Der Punkt mit dem Bond stört mich bei drei Nodes am meisten: wenn beide NICs im Bond hängen, hat Corosync keinen eigenen Weg mehr. Und Corosync ist echt zickig was Jitter angeht, wenn der USB-Adapter mal kurz die Verbindung verliert (Realtek...
  • T
    TrevorW replied to the thread [SOLVED] Can't log in via GUI or connect via PDM.
    Thanks Johnnie root@Proxb2:~# systemctl stop pve-cluster root@Proxb2:~# pgrep -a pmxcfs 3951383 /usr/bin/pmxcfs -l root@Proxb2:~# kill 3951383 root@Proxb2:~# pgrep -a pmxcfs root@Proxb2:~# root@Proxb2:~# systemctl start pve-cluster.service...
  • J
    J-Rod replied to the thread Should i install proxmox on my 4TB SSD RAID 5 setup ?.
    For home lab, it's whatever you want, or need, I suppose. But with software RAID, for simpler troubleshooting and recovery from faults, I would lean towards a mirrored array for boot, rather than single parity, dual parity or even RAID10. So...
  • O
    ow-vtech replied to the thread IO Pressure Stall - Unexplained.
    Hi, maybe you will get angry but I will refer just to last part of your post and ignore NFS re-config section. Because NFS config side never changed since initial cluster and storage setup so yes it is identical. And confirmed working for year at...
  • JohnnieKF
    JohnnieKF replied to the thread [SOLVED] Can't log in via GUI or connect via PDM.
    Try stopping the cluster service entirely and then check if theres a process holding the lock systemctl stop pve-cluster pgrep -a pmxcfs
  • C
    comfreak replied to the thread [SOLVED] Shrink disk on Ceph.
    You normally don't need to rebuild the GPT partition table completely from scratch. GPT keeps a primary copy at the beginning of the disk and a backup copy at the end. When shrinking the RBD with qemu-img resize --shrink, the backup GPT at the...
  • T
    TrevorW replied to the thread [SOLVED] Can't log in via GUI or connect via PDM.
    Thanks Johnnie its complaining about pmxcfs after running the first 2 commands root@Proxb2:~# systemctl start pve-cluster Job for pve-cluster.service failed because the control process exited with error code. See "systemctl status...
  • O
    Onslow replied to the thread kernel 7.0 performance issue with zfs pools.
    Maybe because the latter is not divisible without remainder by 1024.
  • shanreich
    shanreich replied to the thread [SOLVED] VLANS für VMs und Host.
    Bitte den gesamten ip a output anhaengen - es kann gut sein dass es da noch leftover interfaces gibt die probleme verursachen.
  • O
    Onslow reacted to d.oishi's post in the thread Hard disk format issue when importing ESXI to PVE 8.2 with Like Like.
    I suspect that while the VirtIO drivers are installed on CentOS, they are not loading at boot time, preventing the use of SCSI. I recommend fixing this so that you can use SCSI instead of IDE. Below are notes from a procedure I performed...
  • R
    rothkraut replied to the thread [SOLVED] VLANS für VMs und Host.
    auto lo iface lo inet loopback auto nic0 iface nic0 inet static address 10.10.101.42/24 gateway 10.10.101.1 #WEBGUI auto nic2 iface nic2 inet manual #DATA-TRAFFIC NIC auto nic3 iface nic3 inet manual #DATA-TRAFFIC NIC iface...
  • C
    christophe replied to the thread kernel 7.0 performance issue with zfs pools.
    Any idea why 17179869183 could not solve more efficiently ??? :confused:
  • JohnnieKF
    JohnnieKF replied to the thread [SOLVED] Can't log in via GUI or connect via PDM.
    The best thing to do now is finish removing it from the defunct cluster in that case [0]. Kill the manual pmxcfs: killall pmxcfs Stop corosync since it's out of the cluster: systemctl stop corosync && systemctl disable corosync Start up now...
  • fiona
    fiona replied to the thread 7.0.14-7 kernel breaks PCI link training.
    Thank you for providing feedback! I'll leave it to the original reporter to mark it as [SOLVED].
Show older items
Top Bottom
Back