How come then storage was performing reliably with same options before an upgrade? And there is presumably related bug "fixed"?
I understand that You may want to see bigger picture. But it's clearly regression/corner case introduced by PVE 9.2...
Qotom support confirmed a boot-problem with 7-0-14-8, but they found another problem with serial, see:
https://www.qotom.com/support/kernel-panic-system-freeze-on-proxmox-ve-9-2-with-pve-kernel-7-0-14-8-pve
Confirmed fixed for my specific issue - NOT the original post, unfortunately.
Adding that to /etc/default/grub and running proxmox-boot-tool refresh lets it boot with 7.0.14-11-pve
Here's mine:
GRUB_CMDLINE_LINUX="mitigations=off...
Solved for me using the Qotom workaround.
On my QDNV01 / Intel Atom C3558 system, adding:
allows 7.0.14-11-pve to boot normally.
Confirmed in dmesg:
The affected device is the Intel C3000 HSUART controller (8086:19d8), normally handled by...
Confirmed fixed for my specific issue - NOT the original post, unfortunately.
Adding that to /etc/default/grub and running proxmox-boot-tool refresh lets it boot with 7.0.14-11-pve
Here's mine:
GRUB_CMDLINE_LINUX="mitigations=off...
Hi,
currently cross-cluster migration with ZFS only works if either the migration is done while the VM is running, or when the target storage is also ZFS. For reference: https://bugzilla.proxmox.com/show_bug.cgi?id=6087
Could you provide the full VM configs with qm config ID so we can see all the settings? Thanks!
Maybe it's related to the sync mount option? From man 5 nfs:
Hallo Ihr zwei,
vielen Dank für eure schnellen Antworten, damit kann ich auf jeden Fall in eine zweite Testrunde starten.
Zu den IPs: NTP und DNS habe ich jetzt mal weg gelassen. Nur http und https:
45.144.208.36 Österreich, IPAX GmbH...
Moin zusammen!
Ich habe eine Frage zum Networking.
Wir arbeiten mit vielen VLANS. Ein Teil der VLANS muss nur an meine VMs weitergegeben werden. Einige VLANS müssen an meinen PVE-Host.
Ich habe ein dediziertes VLAN für die WEBGUI unsere...
something I noticed after looking into it alot is the net0 wasnt showing up anywhere on the ip lists. I found out the /etc/network/interfaces was a bit broken so I made a new vm to fix it with a referance. something to note is the new vm also...
Das ist Standard-Debian-Kram plus apt, Telemetrie hat PVE keine. NTP läuft über chrony (seit PVE 7 Standard), Config in /etc/chrony/chrony.conf, da einfach euren internen Zeitserver statt dem Debian-Pool rein. DNS stellst du am Node unter System...
NDP → default config von chrony holt sich die Zeit aus dem Internet, kann geändert werden falls es interne Zeitserver gibt.
DNS → sollte selbsterklärend sein
HTTP & HTTPS → sollten Zugriffe auf die verschiedenen package mirror sein wenn nach...
Das ist Standard-Debian-Kram plus apt, Telemetrie hat PVE keine. NTP läuft über chrony (seit PVE 7 Standard), Config in /etc/chrony/chrony.conf, da einfach euren internen Zeitserver statt dem Debian-Pool rein. DNS stellst du am Node unter System...
Do the freezes match the time where a guest-fsfreeze-freeze command is done? This can happen, for example when making backups.
Please take a look at [1] for a list of operations that trigger a qemu-guest-agent filesystem freeze via the...
We kinda know why the problem happens, more or less...
if the VM tries to access a memory zone that the host has currently swapped a PF will be generated so that the guest kernel can do something else on that vCPU while waiting, this behavior is...
Confirmed fixed for my specific issue - NOT the original post, unfortunately.
Adding that to /etc/default/grub and running proxmox-boot-tool refresh lets it boot with 7.0.14-11-pve
Here's mine:
GRUB_CMDLINE_LINUX="mitigations=off...
Update – controlled restore/backup tests and CPU behavior
I performed three controlled tests on the same PVE host and the same ZFS pool:
VM restore from PBS → ZFS/ZVOL with acpi_pad loaded
The same VM restore from PBS → ZFS/ZVOL with acpi_pad...
NDP → default config von chrony holt sich die Zeit aus dem Internet, kann geändert werden falls es interne Zeitserver gibt.
DNS → sollte selbsterklärend sein
HTTP & HTTPS → sollten Zugriffe auf die verschiedenen package mirror sein wenn nach...
/etc/pmg/templates doesn't exist by default. It's an override directory - the stock templates are read-only under /var/lib/pmg/templates/ and pmgconfig uses a file from /etc/pmg/templates/ only if you put one there. You need to create it...
Hi @galffing ,
I hope you don't mind me saying this, but based on the questions you've asked, it seems like W365 would be the best fit for your business needs.
Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...