Latest activity
-
By default, Proxmox storage configurations are cluster-wide. The cluster doesn't automatically know that your iSCSI LUNs are physically restricted to specific nodes. Because of this, all four nodes assume they have access to the storage... -
Hi Fiona, You are correct, the libpve-storage-perl update was not my issue. I had also upgraded 4-year old mobo BIOS on both systems. I thought I had tested after the BIOS upgrade with the same boot failure, but obviously not. I downgraded... -
fiona replied to the thread IO Pressure Stall - Unexplained.Do you experience actual performance issues? How big is the latency for NFS? How much IO did the less affected and more affected VMs actually perform?
-
Ffszorp replied to the thread Automated install via PXE not finding ISO file.Hello! I have tried adding that line before and it works fine when BIOS booting but not when i boot with UEFI. The guide doesn't mention BIOS vs UEFI so I assumed it would work fine for both? I was previously using the below config...
-
Ddmaahr replied to the thread [SOLVED] S3 backend lowercases Access Key ID during SigV4 signing → SignatureDoesNotMatch (MinIO/RADOS).Hi Chris, Thank you — that bug report (#7587) is exactly it. You nailed the root cause. A note first: I used AI to help generate my code and commands for faster and easier execution, but with AI hallucination as a result. I apologise for that...
-
IIsThisThingOn reacted to leesteken's post in the thread set vm ram in GB instead of MB in gui with
Like.
In general or about your feature request? Those are tracked at bugzilla: https://bugzilla.proxmox.com/show_bug.cgi?id=3760 . I don't see any developer assigned yet. -
Ddmaahr reacted to Chris's post in the thread [SOLVED] S3 backend lowercases Access Key ID during SigV4 signing → SignatureDoesNotMatch (MinIO/RADOS) with Like.
Since I stumbled upon https://bugzilla.proxmox.com/show_bug.cgi?id=7587 again, your issue might be just that. If you use default https on port 443, and your provider does not expect the port to be part of the host header (which is signed as...
-
UdoB reacted to Johannes S's post in the thread [SOLVED] Best practice Windows provisioning (mit PXE) with Like.
Ubuntu hat auch eine Autoinstall-Funktion: https://canonical-subiquity.readthedocs-hosted.com/en/latest/intro-to-autoinstall.html Andere Distributionen haben ähnliche Mechanismen, die aber anders konfiguriert werden müssen... -
Ppk0 replied to the thread [SOLVED] I installed a script proxmox VE and it broke my networking.I dont know why but the one of the dockage ones just doesn't seam to be starting docker since theres no networks (it seams to have started). so I'll take form the other one they are very similar ip a1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc...
-
Cc-b-x replied to the thread HseVmbPlugin is implementing an older storage API error.I also get this warning frequently. Not exactly sure what's the trigger. It's very weird, that this is the only mention of this error I can find with any search engine. EDIT: I just realized this plugin was installed by HornetSecurity (former...
-
JohnnieKF replied to the thread Automated install via PXE not finding ISO file.The config you posted only loads initrd.img. There isn't an ISO initrd line at all, this is why /proxmox.iso doesn't exist at runtime. The installer expects the ISO to be handed in as a second initrd named proxmox.iso [0]. This is missing a... -
Bberprinzess replied to the thread Grundsatz für Shared Storage.@AlexanderB: prüfe, wenn alles fertig ist ob bei größeren Kopiervorgängen auf den Share nicht alle paar Sekunden bzw. Minuten der Traffic kurzzeitig runter geht. Wenn das so ist hast du irgendwo einen Flaschenhals. Am besten auf die IO Werte...
-
IITT reacted to Johannes S's post in the thread [Community project] Proximo — an open-source, least-privilege MCP/API layer for managing PVE with an AI agent (feedback wanted) with Like.
I see a problem with such an attitude: If you think that it's somehow ok to do things in a dev/dev environment and push things afterwards to production you might end up with a production setup which shouldn't be done. Especially if your "rapid...
-
JohnnieKF replied to the thread [SOLVED] I installed a script proxmox VE and it broke my networking.net0 is just a name applied to eth0 for better clarity, this doesn't have an impact on the device your container sees. Can you check these on your container: ip a ip r
-
Ppulipulichen replied to the thread [SOLVED] Is there a way to enable HA by default for all new VMs in a cluster?.Thanks, Johannes. I found that a similar feature request has already been opened: https://bugzilla.proxmox.com/show_bug.cgi?id=7893 It seems to cover exactly the cluster-wide option to automatically add newly created guests as HA resources...
-
OOnslow replied to the thread Potential Greylisting issue.@El_Rapha, I get the impression that you don't read my replies carefully. 1) Retrying after only 10 minutes may possibly be too early. 2) open.ai retries were in a 5 minutes span - almost surely too early. 3) I'm repeating the question: were...
-
DDRGBL5 posted the thread Windows Server sequential write performance on Ceph RBD is ~2x slower than OpenStack using the same backend in Proxmox VE: Installation and configuration.Hi, We're investigating a significant performance difference between Proxmox VE + Ceph and another KVM/OpenStack + Ceph environment. The issue only affects Windows guests. Environment Proxmox VE 9.2 Ceph Tentacle 20.2.2 QEMU 11 Windows...
-
Ppk0 replied to the thread [SOLVED] I installed a script proxmox VE and it broke my networking.I set it to dhcp I observed no real, I set it to static no real change also its called eth0 not net0 despite what it says. Oddly it displays no network information on dhcp and on static it seams to be missing everything but the out and the in in...
-
Oow-vtech replied to the thread IO Pressure Stall - Unexplained.Hi @fiona, In our environment of a few physical hosts recently upgraded to 9.2 we also bumped into that bug. And I cannot confirm that any versions pve-qemu-kvm>=10.2.1-2 made any difference. I used straight forward logic that io=io_uring...