Latest activity
-
Ddjdonnerwolke reacted to UweV's post in the thread [SOLVED] pve kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang: with
Like.
This is a known issue - a workaround is to disable offloading on these Intel NICs. One option to do this: https://community-scripts.github.io/ProxmoxVE/scripts?id=nic-offloading-fix&category=Proxmox+%26+Virtualization -
Wwendellrodriguez reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
Rrovingclimber replied to the thread [Community project] Proximo — an open-source, least-privilege MCP/API layer for managing PVE with an AI agent (feedback wanted).Mmmm what a thread [to bring back from the dead]! Came across by accident while looking for such a thing. A couple of (hooman written) thoughts: - Not all proxmoxboxes are prod critical. For test / dev / rapid development a proxmox server where...
-
BDas hängt dann einfach der installer und wartet auf antwort vom laufenden Schritt. Bei Debian habe ich das noch nicht gesehen, nur bei OMV, und es ist wohl selten. Das ist auch im OMV Forum mal Thema gewesen, scheinbar juckt es niemanden. Der...
-
bbgeek17 replied to the thread LVM Snapshot-as-Volume-Chain: Newly created qcow2 image reuses old guest data after VM deletion.Hi @krisshurley , we covered behavior related to your findings in our KB article a while back: https://kb.blockbridge.com/technote/proxmox-qcow-snapshots-on-lvm/#data-consistency-and-information-leak-risks One approach would be to wipe the... -
Uuzumo replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.This is probably a problem with the megasas driver, but to begin with, no one ever said there would be no issues using Megaraid as a JBOD. If firmware for IT mode were available and mpt3sas could be used, there probably wouldn’t be a problem...
-
Francois Baillargeon replied to the thread [SOLVED] /etc/network/interfaces Permission Denied after Hardware Change.Weren't you root? -
Francois Baillargeon reacted to SuBun7's post in the thread [SOLVED] /etc/network/interfaces Permission Denied after Hardware Change with Like.
After moving my HDD with my ProxMox installation to a new computer - some hardware in the previous one gave out - trying to access '/etc/network/interfaces' by any means shows the message "Permission Denied". I'm not sure why this is happening...
-
Francois Baillargeon replied to the thread Intel I225-V igc NETDEV WATCHDOG/reset loop on 7.0 kernels; stable on 6.17.That smells like this https://bugzilla.proxmox.com/show_bug.cgi?id=6273 Unfortunately it required a Kernel regression
-
VvPro replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.Had exactly the same issues with some HPE DL380 Gen 11 and MR-416i-o, never figured out how to address this issue. Put MRs from JBOD to RAID and set up the RAID. Use the RAID-Volume for "ZFS single disk". ZFS sees the MR RAID as a physical disk...
-
Francois Baillargeon replied to the thread unifi enviroment native + tagged on the server port.Hey Johannes, yes set it as id 1 if now it will behave as a trunk port. I used that before to make virtual OPNSense boxes where trunking was wanted. Hope thah helps!
-
Francois Baillargeon replied to the thread systemd[1]: user@1002.service: Failed with result 'timeout'..Hmm, smells like bad ram Can you see anything in your ipmi ? See, it seems like it's expecting stuff from memory that returns a different value Aug 08 03:27:10 safe2025 kernel: list_add corruption. prev->next should be next (ffff8a80671bc818)...
-
Vviktorio reacted to UdoB's post in the thread How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage? with Like.
You have not much experience with PVE, are using sub-optimal (not recommended) hardware and are starting with "Docker in LXC". This lands you immediately inside a battle field. That combination means you are piling up multiple problem areas from...
-
Francois Baillargeon replied to the thread Proxmox + Ceph across 2 datacenters.I agree with the others that this is a setup with many caveats and has high disk consumption (due to the requirement of having rf4) Also this sounds like Corosync will be over shared media , so make sure your QoS is tight accordingly
-
TTErxleben replied to the thread Grundsatz für Shared Storage.Das ist doch viel zu verkompliziert. beim Anlegen einer VM nur daran denken, zwei virtuelle Disks anzulegen. Einmal 8GB fürs BS und eine in gewünschter Größe für die Daten. Wenn es um das Bluescreenproblem bei OMV geht, dann nach Hinweis von...
-
PSeit pve-manager 9.2.7 sieht man den Unterschied bei der Template-Auswahl. Ab Version 9.2.10 vom pve-manager kann man die unpassende Architektur gar nicht mehr auswählen. Also einfach mal updaten. :)
-
Bboisbleu replied to the thread Frischer LXC Container startet nicht.Wer das Enterprise Repository nutzt, steht aktuell auf 9.2.4.
-
Vviktorio reacted to ghedo's post in the thread serial console to VM hangs after extended time away and is unrevocerable except on reboot with Like.
same problem: px 9.x guest debian13 , xterm.js stop working after a while
-
PPatrik_V replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.There's so much evidence that I'm not making this up... That's why I'm asking if the 7.X kernels are already better in this regard?
-
PPatrik_V replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.root@berdaepve041:~# dmesg -T | tail -30 [Fri Jul 17 13:11:37 2026] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Fri Jul 17 13:11:37 2026] CR2: ff4443b3443ec000 CR3: 0000000ae8c3e006 CR4: 0000000000f73ef0 [Fri Jul 17 13:11:37 2026] PKRU...