Latest activity
-
Bbdr replied to the thread Increased latency on disks since 9.2.6 and associated 7.0.x kernel.I encountered the same issue when updating from kernel 7.0.2-4-pve to kernel 7.0.14-8-pve. I also use Munin, and the latency graph started showing spikes as you mentioned. I ran fio performance tests on both kernels and don't notice any major...
-
BBu66as reacted to Raudi's post in the thread [SOLVED] PVE 9.1.4 / NVIDIA Tesla T4 / vGPU 19.3 Installation with
Like.
Ich möchte noch mal berichten... Heute habe ich meine Umgebung wieder aktualisiert, nach dem ich das eine Weile etwas vernachlässigt hatte: NVIDIA vGPU Treiber: 580.126.08 -> 595.91.04 (20.2) PVE-Manager: 9.1.9 -> 9.2.10 Kernel: 6.17.13-3-pve ->... -
Bbdr replied to the thread ZFS performance collapse on MegaRAID 9364 with Samsung 870 EVO SSDs (PVE 9).In fact, I think I'm in the same situation as the ticket you mentioned. After performance tests on both kernels (7.0.2-4-pve and 7.0.14-8-pve), I don't notice any major difference. # 7.0.2-4-pve + 4K random + read: IOPS=1141k, BW=4456MiB/s...
-
KkosmicUser posted the thread How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage? in Proxmox VE: Installation and configuration.Hi. I have an old Lenovo Yoga, and I have decided to repurpose it into my very first homelab using Proxmox. Here are my specs. CPU: Intel 17-8550U RAM: 16GB GPU: NVIDIA GeForce GTX 1050 Storage: 1TB SSD I've finished installing Proxmox, and...
-
Ggaaike posted the thread pmg8to9 FAIL: "Resolved node IP not configured or active" — expected for NAT'd gateway with public HELO hostname? in Mail Gateway: Installation and configuration.Running pmg8to9 ahead of an 8.2→9.1 upgrade and getting one FAIL: FAIL: Resolved node IP 'x.x.x.x' not configured or active for 'mail' Setup: PMG VM behind pfSense NAT. Internal IP 10.5.10.204 is what's actually bound to the NIC. /etc/hosts...
-
Ttoffer84 replied to the thread Replikationsjob ZFS löschen.Danke für den Tipp. Ich würde das nach einem Backup auf dem SRV-PVE machen und dann wird das auf den SRV-PVE3 repliziert oder muss ich das explizit noch auf dem SRV-PVE3 machen?
-
Ttoffer84 replied to the thread Replikationsjob ZFS löschen.Ich würde sagen ja: { "nodename": "srv-pve", "version": 5, "cluster": { "name": "pve-cluster", "version": 7, "nodes": 2, "quorate": 1 }, "nodelist": { "srv-pve": { "id": 1, "online": 1, "ip": "192.168.1.X"}, "srv-pve3": { "id": 3, "online"...
-
TSchau dir mal cat /etc/pve/replication.cfg an. Man kann die Datei direkt editieren. Dabei arbeitet man ohne Sicherheitsmechanismen am offenen Herzen --> Vorsicht! Und erst ein Backup woanders hin kopieren...! ;-)
-
TBist du sicher, dass das sauber funktioniert hat? https://pve.proxmox.com/pve-docs/pve-admin-guide.html#pvecm_remove_node Kontrolle mit cat /etc/pve/.members
-
MThanks for the information Indeed, there were a user who stayed on this page. Best regards
-
MI believe it's only run when you're on the VM's summary page, as Proxmox VE gets the guest IP address information using the guest agent. I'm not sure you can (or should) disable guest-agent logging messages.
-
JJ-Rod replied to the thread Dirty Bitmap Backups are Wearing on Me.For purposes of discussion, even if you increased your performance by a factor of ten, there will still be issues. 9TB of data can be smoothed over by a huge performance boost, but what if you had 100TB? 1PB? And there are going to be...
-
Sshodan posted the thread How to disable Secure Boot easily for iPXE when you get NBP file downloaded successfully / failed to load Boot / Access Denied in Proxmox VE: Installation and configuration.Hi, It took me a while to figure out what I was doing wrong. I was trying to boot with iPXE, but it just wouldn't ! And the bios firmware should be a lot clearer about the problem not just say "Access Denied" On this already very difficult...
-
-
MMarroniJohny reacted to Bu66as's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with Like.
Mit drei Nodes pro Standort bist du das QDevice-Thema los, das reicht fürs Quorum. Und ja, OEM-Geräte mit vPro sind völlig okay, wenn du eh drei Hosts hast. Der BMC ist hauptsächlich dafür da, dass du remote hart aus- und wieder einschalten...
-
Ccyruspy posted the thread Centralized scheduling for non PVE clients in Proxmox Backup: Installation and configuration.Currently proxmox-backup-client is a stateless, outbound-only CLI, and PBS operates purely as a passive storage endpoint. For non-PVE / standalone Linux hosts, backups must be scheduled locally per-host (e.g. cron or systemd timers). This creates...
-
Pparadox55 replied to the thread ARM64 CT templates.I'm not sure about this specific link but the problem I ran into with using third party container images is that the networking didn't use the right IP address assigned. Works fine with the arm64 image proxmox included though.
-
J...also ich finde für das "klicki&bunti" TrueNAS doch recht anfängerfreundlich, dafür das es auch im Enterprise Umfeld unterwegs ist: 1. Benutzer anlegen, TrueNAS fragt gleich ob auch die SMB Berechtigung un der Dienst dazu gesetzt und gestartet...
-
JUnd auf jedem ZFS Pool nicht vergessen diesen anzupassen und sich immer ein Quota anlegen. Denn, man darf nie den ZFS Pool "voll" schreiben. Je nach Speichertechnologie HDD, SSD sind da andere oder ähnlich Grenzen sinnvoll!
-
JDie Idee ist ja nicht schlecht, aber warum erst Debian installieren, dann die Repos einbinden um dann OMV reinzubügeln, welches ich out of the box als ISO bekomme? Und das erzählst du einem Anfänger? Klar den prozesskillen ist schwierig…. Das...
-
JOder irgendeine andere NAS-S/W. Jedenfalls ist PVE nix in dem Fall. :rolleyes:
