Latest activity
-
Ddimante posted the thread [SOLVED] Reboots causing windows to display the improper shutdown reason screen in Proxmox VE: Installation and configuration.I have all of the agents on the vms. When performing a PVE reboot even though the instance shuts all of the VMs down and then reboots when the servers come back up they display the message window indicating the system was not shut down properly...
-
And the fix reach no-subscription already and resolved the issue completely. -
Oorkiniec replied to the thread Dell R760 High I/O Pressure with NFS, but No Measurable VM Impact.actually, I already tested that earlier in my setup. the dataset was originally configured with sync=always, and changing it to sync=standard made a very noticeable improvement in the day-to-day performance of the VMs. I also tested...
-
gyptazy reacted to Falk R.'s post in the thread Off Topic - Community Stand bei der Kielux with
Like.
Hallo Zusammen, ich möchte dieses Jahr auf der Kielux (19.-20.09. in Kiel) einen Community Stand betreiben. Da ich allein nicht alle Fragen beantworten kann und auch mal Biopausen brauche, hätte ich gern Unterstützung dabei. Wer hat denn Lust... -
Hhigh_performer replied to the thread Mehrere Datastores auf EIN Tape sichern.Ja Moiner, ich würde 2 Datastores auf EIN Tape bringen wollen. Eines ist von einem anderen Standort hergesynct. Sync findet jede Nacht statt. ich habe die Parameter jetzt mal angepasst, bin auf morgen gespannt! Ja - das mit den Wochentagen als...
-
MMike_Scholes replied to the thread [SOLVED] Verify Error, "error reading a body from connection" could this be made retriable?.Getting lots more
-
-
Pparadox55 replied to the thread VPS crashing.I guess I could always use LXC containers instead, but it bums me out a bit that KVM vps are crashing.
-
PI have a couple 32GB RAM orange pi 5 pluses I'm attempting to use with the arm64 proxmox. I am using the following UEFI firmware: https://github.com/edk2-porting/edk2-rk3588 VPS run, but they crash frequently. I thought at first it was a OS...
-
MMikeDeez reacted to OhmEye's post in the thread After PVE 8to9 upgrade, unable to check guest fs freeze status with Like.
Hello, I upgraded my 5-node PVE cluster from 8 to 9.2.2 and PBS to 4.2.0. I have a TrueNas Core VM (FreeBSD based) that I made no changes to during the upgrade other than shutting it down for the upgrade, it started normally on the upgraded PVE...
-
Lluckman212 replied to the thread IPv6 on ISCSI and Proxmox 8.I stopped my Synology from advertising IPv6 on the iscsi targets with something like: nas_ip=192.168.10.10 sed -Ei "s/^(network_portals)=(.*)/\1=$nas_ip:3260/" /usr/syno/etc/iscsi_target.conf You can use Task Scheduler to run this code at startup.
-
Vverishare replied to the thread Optimizing Windows VM performance on older hardware - settings advice needed.Sorry guys, my ISP has just implemented CGNAT on my home broadband, where my Proxmox home server is hosted. Since then, I've been having trouble accessing it remotely. Quick question: does Proxmox not enable IPv6 by default? If that's the case...
-
Falk R. replied to the thread Meinung Disaster Recovery Konzept.Hi, das Konzept ist gar nicht schlecht. Du solltest nur absichern, dass die VMs nicht auf ClusterB gestartet werden. Hast du dir auch schon um das Netzwerk und die Anbindungen der Clients gedanken gemacht? Das Netzwerksetup ist viel kritischer... -
Falk R. replied to the thread Off Topic - Community Stand bei der Kielux.Aus gegebenen Anlass hole ich den Thread noch einmal raus. Dieses Jahr findet am 18. und 19.09. wieder die Kielux in Kiel statt. Wer vorbei kommen möchte ist herzlich eingeladen und falls jemand Lust verspürt mich zeitweise am Proxmox Community...
-
Moayad reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64... -
Llucasj replied to the thread [SOLVED] Unable to get PID for CT on stop.CT 122 is likely getting stuck in a zombie/partial state during stop, try running pct stop 122 --force from the Proxmox shell to force kill it. If that still loops, check lxc-info -n 122 to see what state LXC actually thinks it's in, and...
-
Francois Baillargeon reacted to DamienDye's post in the thread [TUTORIAL] PVE installed on top of an SDN VXLAN zone: terminal/Web UI stalls and "failed to set mtu to 1500" with Like.
if you raise the raw mtu on the the current network you can then use 1500 mtu inside the vxlan tunnels. this should also mean that you don't have traffic issues and have to reduce the MTU on the nested instanced -
VictorSTS replied to the thread Nested PVE (on PVE host) Kernel panic Host injected async #PF in kernel mode.Disabling disk swap is enough. PF are still enabled when using zram as swap and the problem has never happened with that enabled, so the problem is related to disk swap on the host but can't really point my finger to a specific component (kernel... -
NNobster replied to the thread USB Problem - die 1658. - oder so ....Erstmal danke - mounten möchte ich den Stick schon und dann dort irgendwelche Dateien auslagern. Aber ich weiß nicht, wie ich ihn mounten soll. Ich sehe ja "nix" ... Folgende Ausgaben mit lsusb usw... ubu:/run/media$ lsusb Bus 001 Device 001...
-
MMusikJunk reacted to aoxiangtianji's post in the thread 7.0.14-7 kernel breaks PCI link training with Like.
I have a SK hynix PE4010 (HFS960GD0TEG-6410A, 894G) installed on a PCIe splitter card on an ASRock B450M Pro4-F. The splitter card has no switch chip; it relies on the motherboard's PCIe bifurcation. After updating from 7.0.2 to 7.0.14-8, PVE...
-
Ppma66271 replied to the thread Severe Upgrade Issues.Thank you all. Everything is cleaned up and looking good now.
